Search
Search Results
-
Anodic processes in the alkaline Cu | Cu(II), glycine system—construction and analysis of mass transport–corrected Tafel plots
The anodic behavior of the alkaline Cu | Cu(II), glycine system was investigated by RDE voltammetry combined with EQCM measurements. Well-defined...
-
Development of silane/acrylate-based hybrid polymer coating through sol–gel technique for anti-corrosive application
Current work introduces the silane/acrylate hybrid coating system through sol–gel technique for anti-corrosive application. 3-Aminopropyl...
-
Electrochemical corrosion behaviour of stir cast and heat-treated EV31A magnesium alloy in different electrolytic mediums
The EV31A magnesium alloy has the potential for use in aerospace and automotive applications. To ensure the longevity of magnesium and its alloys in...
-
Estimation of Corrosion Rate of AISI 1016 Steel by the Analysis of Polarization Curves and Using the Method of Measuring Ohmic Resistance
AbstractBy the example of the study of AISI 1016 steel corrosion in the HCl solution, the potentialities of various methods for determining the...
-
Electrochemical studies on the corrosion performance of ternary ethanol–butanol–gasoline and methanol–butanol–gasoline blends
We are still largely dependent on SI and CI engines to power marine freight, aircraft and land transport. These engines make use of fossil fuels...
-
Electrochemical insights: octadecanethiol self-assembled monolayers on leaded brass for enhanced anti-corrosion protection in non-complexing media—unraveling the impact of halide ions
This paper presents a comprehensive study of the electrochemical and anticorrosion properties of leaded α,β'-brass (CuZn39Pb3), both in its bare form...
-
Estimation of Corrosion Rate of STARBOND–CoS Cobalt–Chromium Alloy in the NaCl Solution
AbstractThe corrosion potential E corr of STARBOND–CoS alloy in the 0.5 M NaCl solution was measured for 100 h. The anodic and cathodic...
-
Investigation of the effect of conversion bath aging time on V/Zr-based conversion coating formation and corrosion resistance ability
The effect of aging time of V/Zr-based conversion bath on coating formation and corrosion resistance ability was investigated. Scanning electron...
-
Electrochemical behavior of silver during cyanidation in the presence of sulfide minerals
The present work focuses mainly on the study of electrochemical phenomena induced by the presence of sulfide minerals during silver cyanidation....
-
Enhanced active edge sites on MoSe2 nanostructures for stable electrocatalytic and photocatalytic hydrogen evolution reaction
In this work, we report a simple one-pot hydrothermal synthesis of MoX 2 and NiX 2 (X = O, S, and Se) for facilitating the catalytic hydrogen evolution...
-
TiO2 nanotube/chitosan-bioglass nanohybrid coating: fabrication and corrosion evaluation
In present work, the effect of titania (TiO 2 ) nanotubes formation incorporated with chitosan-58S bioactive glass (TNT/Chitosan-58S BG) on...
-
Electrochemical evaluation of the effect of anode to cathode surface area ratio on power generation in air-cathode microbial fuel cells
AbstractIn microbial fuel cells, the surface areas of electrodes play a key role in power generation. Conventionally, the surface area ratio of 1 is...
-
Microstructure and corrosion behavior of Cu-based alloys containing Al-Ag after normalizing and annealing heat treatments
The alloys of the aluminum bronze system contain 5–14wt% Al that can be heat treated giving as result of different microstructures that were...
-
Electrodeposition of zinc from ethylene carbonate-ZnCl2 electrolyte system
Zinc is a commonly used corrosion-resistant coating for steel surface protection. In this study, the ethylene carbonate-zinc chloride (EC-ZnCl 2 )...
-
Novel use of kitchen waste: protection of boiler quality steel from corrosion in acidic media using onion waste
An eco-friendly approach to inhibit the corrosion of boiler quality (BQ) steel by onion waste in acidic media was investigated. The extract from...
-
Creation of leather black dye film on copper through spin coating and drop casting, and comparative investigation of their corrosion behaviour in sodium chloride solutions
To protect Cu from corrosion, one of the efficient approaches is to coat the Cu substrate with passivation materials. This work investigates the...
-
Strategies of metal corrosion protection
The present article involves the electrochemical fundamentals of overvoltage/polarization of charge transfer and preceding diffusion, short-circuited...
-
Current collectors corrosion behaviours and rechargeability of TiO2 in Aqueous Electrolyte Aluminium-ion batteries
The effects of current collectors on the battery performance have significant role, especially in aqueous electrolyte Al-ion batteries, as corrosion...
-
Improved anticorrosive property of waterborne epoxy coating by ultrasonic blending with small amounts of polyaniline
In order to improve the anticorrosive performance of waterborne epoxy (WEP) coating, small amounts of polyaniline (PANI) were blended under...
-
Electrochemical characteristics of the dynamic progression of erosion-corrosion under different flow conditions and their effects on corrosion rate calculation
The erosion-corrosion performance of X65 carbon steel at different flow conditions was electrochemically studied. Results show that the anodic...
