Search
Search Results
-
Polymer Materials for 3D Printing (Fused Deposition Modelling)
AbstractThis review examines the basic principles of 3D printing from polymer materials with an emphasis on modeling technology using the fused...
-
Multi-walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Nanocomposite Filaments for Fused Deposition Modelling Type 3D Printing
The multi-walled carbon nanotube/acrylonitrile-butadiene-styrene (MWCNT/ABS) nanocomposite filaments containing 3, 5, and 10 wt% nanofiller were...
-
Porphyrin-fused graphene nanoribbons
Graphene nanoribbons (GNRs), nanometre-wide strips of graphene, are promising materials for fabricating electronic devices. Many GNRs have been...
-
Mechanical and Wear Characteristics Investigation on 3D Printed Silicon Filled Poly (Lactic Acid) Biopolymer Composite Fabricated by Fused Deposition Modeling
Fused deposition modeling (FDM) has attracted much attention in recent years because it allows the rapid fabrication of customizable biopolymer-based...
-
Material Extrusion und Vat Photopolymerisation – Prinzipien, Möglichkeiten und Herausforderungen
Die additive Fertigung (AM) von Kunststoffkomponenten kann durch eine Vielzahl von Methoden erreicht werden, die danach klassifiziert werden, wie... -
3D Printing Based on Material Extrusion to Create Surface Patterns on Textile Fabrics
3D printing technology has been develo** rapidly in recent years. This technology is extensively used for producing prototypes of products and...
-
-
Adsorption properties of iodine on fused silica surfaces when evaporated from tellurium in various atmospheres
The evaporation of iodine containing species from tellurium has been investigated together with their adsorption behavior on a fused silica surface....
-
Modelling and Structural Analysis of 3D Printed Auxetic Structure
Auxetics are materials or structures that possess a negative Poisson’s ratio due to their meticulous internal structure and the way of deformation.... -
Material Extrusion and Vat Photopolymerization—Principles, Opportunities and Challenges
The additive manufacture (AM) of plastic components can be accomplished by a variety of methods which are classified according to how material layers... -
3D-printed bioresorbable vascular stents: emerging frontiers in personalized cardiac care
Coronary artery disease (CAD) is one of the leading death-causing diseases. Various drug treatments and surgical procedures are available to treat...
-
A CAD-Based Method for the Measurement of AM Parts Accuracy Considering the Build Orientation
In Additive Manufacturing (AM), several printing processes such as Fused Deposition Modelling (FDM) can deliver complex parts and shapes in short... -
Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering
Melt extrusion of thermoplastic materials is an important technique for fabricating tissue engineering scaffolds by additive manufacturing methods.... -
Study of the Influence of the Internal Structure of Topologically Optimized Designs on their Stress-Strain State
The use of topological optimization (TO) in most cases is limited to theoretical studies, since the result of solving TO problems, as a rule, is a...
-
Effect of nano-biochar on mechanical, barrier and mulching properties of 3D printed thermoplastic polyurethane film
In this research work, the nano-biochar/thermoplastic polyurethane (TPU) nanocomposite mulching films were successfully prepared by fused deposition...
-
PLA bio-nanocomposites reinforced with cellulose nanofibrils (CNFs) for 3D printing applications
This study deals with the development of 3D printable bionanocomposites using poly(lactic acid) (PLA) with ≤ 2% D-lactic acid content and cellulose...
-
Revolutionising textile manufacturing: a comprehensive review on 3D and 4D printing technologies
An exhaustive and integrative overview of recent developments in 3D and 4D textiles based on Additive Manufacturing (AM) were provided in order to...
-
A Comparative Study of the Physico-Mechanical Properties of Material Extrusion 3D-Printed and Injection Molded Wood-Polymeric Biocomposites
The present study evaluates the effect of material extrusion 3D-printing and injection moulding (IM) on the physico-mechanical properties of...
-
Designing 3D printable food based on fruit and vegetable products—opportunities and challenges
3D printing is an innovative technology for food industry, which provides tremendous opportunities for the designing of customized and personalized...
-
Cellulose Nanocrystals-mediated Phase Morphology of PLLA/TPU Blends for 3D Printing
Incorporation of nanoparticles into polymer blend to obtain finely dispersed morphology has been considered as an effective strategy to prepare...