Search
Search Results
-
Reasons for the Degradation of Electrodes Based on Layered Transition Metal Oxide LiNi0.8Co0.15Al0.05O2
AbstractGalvanostatic cycling and electrochemical impedance spectroscopy are used to study reasons for the capacity fading when cycling electrodes...
-
Anode characteristics and electrochemical machining of U71Mn alloy in different electrolyte solutions
Electrochemical machining (ECM) is one of the most ideal machining methods for difficult-to-cut material of U71Mn alloy. Therefore, it is vital to...
-
Synergistic impact of multiwalled carbon nanotubes on the properties of Ni-Mo thin-film via electrodeposition technique
Carbon nanotubes (CNTs) are the hardest and strongest materials due to their perfect mechanical properties and excellent chemical, electrical, and...
-
Kinetic analysis of the quasi-stable pitting propagation in the 304 SS based on the asymmetrical electrochemical noise
A slightly asymmetrical electrode pair configuration was employed on the 304 SS to promote the possible preferential pitting propagation on one...
-
Electrochemical behavior of additive manufactured TC4 alloy in different concentrated NaCl solutions
The corrosion behavior and transpassive dissolution properties of TC4 alloy produced by additive manufacturing technology via the laser cladding...
-
Stress variations during polarization of iron thin film electrode in pH 8.4 borate buffer solution
The stress variations during polarization of iron thin film electrode in pH 8.4 borate buffer solution have been measured by a cantilever bending...
-
Efficacy and Mechanism of the Action of Zinc Complex Nitrilo-tris-Methylenephosphonic Acid As an Inhibitor of Corrosion in Low-Carbon Steel in Neutral Bromide- and Iodide-Containing Aqueous Media
AbstractA study is performed of the effect zinc complex nitrilo- tris -methylenephosphonic acid Na 4 [Zn{N(CH 2 PO 3 ) 3 }]⋅13H 2 O has on the...
-
Study on the synergistic effect and mechanism of inhibitors benzotriazole and pyrazole on copper surface
In the giant large-scale integrated circuits manufacturing process, chemical mechanical polishing (CMP) for Cu interconnection can lead to chemical...
-
Bi-layer Gelatin Film: Activating Film by Incorporation of “Pitanga” Leaf Hydroethanolic Extract and/or Nisin in the Second Layer
Active films have gained increasing interest because of their potential to reduce the amount of additives into foods. The aim of this work was to...
-
Study of the influence of the preparation method on the electrochemical dissolution behavior of Inconel 718
In order to investigate the influence of the preparation method on the electrochemical dissolution behavior of the typical superalloy Inconel 718, we...
-
Preparing an ultra-smooth TaW alloy surface with chemical mechanical polishing via controlling galvanic corrosion
An ultra-smooth tantalum alloy surface is essential to prepare a high-quality coating. This work employed the chemical mechanical polishing (CMP)...
-
Breakdown of passivation for zinc-antimony alloy in alkaline batteries verification; galvanostatic, impedance spectra, and charge-discharge techniques
The passivation of pure zinc surface can be considered a problem of Zn utilization as an anode in alkaline batteries due to its small capacity....
-
A Correlation between the Electrochemical Behavior, and Antibacterial Activity of Some S-Triazino-Benzimidazoles
AbstractThe electrochemical behavior of the biologically active redox chemicals is essential in point of view antibacterial activity. In some cases,...
-
Investigating the impact of post-weld cleaning and passivation on the performance of austenitic stainless steel using an EIS paste-electrolyte cell
The study investigates the impact of mechanical cleaning, citric acid+sodium hydroxide (CA), and nitric acid (NA) passivation on welded SS304...
-
Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva
AbstractIn this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid...
-
Effect of surface roughness on contact resistance and electrochemical corrosion behavior of 446 stainless steel in simulated anode environments for proton exchange membrane fuel cell
The effect of surface roughness on the interfacial contact resistance (ICR) and the corrosion behavior of 446 stainless steel in simulated anode...
-
Comparative Analysis over Tribology Characterization of TiAlN and TiAlSiN PVD Coating on Plasma Nitride Alloy 20
The nickel–iron–chromium (alloy 20) is enriching by hybrid surface treatment through plasma nitride (PN) and physical vapor deposition (PVD) process....
-
The synthesis of polyindole-based binder-free coating and its effect on the corrosion behavior of mild steel in 3.5% NaCl solution
The influence of three polyindole samples on the corrosion rate of mild steel in the absence and presence of different amounts of acetonitrile was...
-
Investigation of the electrochemical behavior of AlCoCrFeNi–ZrO2 high entropy alloy composites prepared with mechanical alloying and spark plasma sintering
High entropy alloys, especially AlCoCrFeNi, have received much attention in recent years due to their unique properties. Therefore, the study of the...
-
XPS and EIS studies to account for the passive behavior of the alloy Ti-6Al-4V in Hank’s solution
The passivation mechanism of the film formed on the alloy Ti-6Al-4V was evaluated in Hank’s solution to infer the properties of this alloy as an...