Skip to main content

13 Result(s)

within Zheng** Jiang Remove this filter Characterization and Evaluation of Materials Remove this filter Solid Mechanics Remove this filter

and

  1. No Access

    Article

    A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding

    Systematic study on the microstructural evolution, interfacial diffusion and mechanical properties of ultra-thin stainless steel–copper composites (50 µm) after annealing treatment was conducted in the present...

    Yanyang Qi, **aoguang Ma, Linan Ma, Cunlong Zhou… in Metals and Materials International (2024)

  2. No Access

    Article

    Design of a robust LMI-based H∞ observer for the state of charge estimation in lithium-ion batteries

    Designing a robust Hꝏ observer to estimate the state of charge (SoC) of lithium batteries for various applications, including microgrids, is the principal goal of the present article. Battery dynamic models al...

    Baofan Chen, Chunrong Zhou, Zhenghong Jiang in Multiscale and Multidisciplinary Modeling,… (2024)

  3. No Access

    Article

    Microstructure-Based Modelling of Elastoplastic Properties and Deformation Characteristics of Advanced High Strength Dual-Phase Steel

    The 3D representative volume element modelling concerning different microstructural features and renowned work hardening models was developed in this study. Simulation results of stress–strain relationship bas...

    Mingshuai Huo, Haibo **e, Tao Zhang, Lianjie Li… in Metals and Materials International (2023)

  4. No Access

    Article

    Effects of strain rate on the microstructure and texture evolution of a TRIP-TWIP metastable austenitic stainless steel during bending

    Microstructure evolution, deformation-induced martensitic transformation and texture evolution were investigated in a metastable austenitic stainless steel during bending under various strain rates ranging from έ

    Hamidreza Kamali, Haibo **e, Hongyun Bi, E. Chang… in Journal of Materials Science (2022)

  5. No Access

    Article

    Multiscale Interface Stress Characterisation in Cold Rolling

    This paper provides a comprehensive review on the multiscale characterisation of interface stresses in cold rolling considering both the random asperity deformation and lubrication. The characterisation of the...

    Chuhan Wu, Liangchi Zhang, Peilei Qu, Shanqing Li… in Metals and Materials International (2021)

  6. No Access

    Article

    Microstructure and texture evolution of cold-rolled low-Ni Cr–Mn–N austenitic stainless steel during bending

    Microstructure and texture evolution of a low-Ni Cr–Mn–N austenitic stainless steel were analysed during three-point bending process. The electron back-scattering diffraction (EBSD) was used to characterise th...

    Hamidreza Kamali, Haibo **e, Fanghui Jia, Hongyun Bi… in Journal of Materials Science (2021)

  7. No Access

    Article

    In-Situ Observation of Martensitic Transformation in a Fe–C–Mn–Si Bainitic Steel During Austempering

    The martensitic transformation in a Fe–C–Mn–Si bainitic steel was examined by in situ high-temperature laser scanning confocal microscopy (LSCM) and dilatometry. The phenomenon of continuous martensitic transf...

    Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu… in Metals and Materials International (2020)

  8. No Access

    Article

    Tuning the interfaces of Co–Co2C with sodium and its relation to the higher alcohol production in Fischer–Tropsch synthesis

    Catalytic conversion of the syngas into higher alcohols (HAs) via Fischer–Tropsch (F–T) synthesis is essential due to the widespread applications of HAs. The interfaces of cobalt and cobalt carbide (Co2C) are fou...

    Yang Liu, Shun He, Ruoou Yang, Fanfei Sun, Yuqi Yang… in Journal of Materials Science (2020)

  9. No Access

    Article

    Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

    The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500 thermo-mechanical test simulator with a hydrawedge sy...

    Guoqing Zu, Yukuan Lu, Yi Yan, **aoming Zhang… in Metals and Materials International (2020)

  10. No Access

    Article

    Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels

    In the present research, the effects of Nickel (Ni) and Chromium (Cr) on cryogenic impact toughness (CIT) of low-carbon bainite/martensite multiphase steels [processed by two different cooling processes: isoth...

    Zishan Yao, Guang Xu, Zhengyi Jiang, Junyu Tian… in Metals and Materials International (2019)

  11. No Access

    Article

    Effect of Ni Addition on Bainite Transformation and Properties in a 2000 MPa Grade Ultrahigh Strength Bainitic Steel

    The effects of Nickle (Ni) addition on bainitic transformation and property of ultrahigh strength bainitic steels are investigated by three austempering processes. The results indicate that Ni addition hinders...

    Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu… in Metals and Materials International (2018)

  12. No Access

    Article

    Flow behaviour and constitutive modelling of a ferritic stainless steel at elevated temperatures

    The flow behaviour of a ferritic stainless steel (FSS) was investigated by a Gleeble 3500 thermal-mechanical test simulator over the temperature range of 900–1100 °C and strain rate range of 1–50 s−1. Empirical a...

    **gwei Zhao, Zhengyi Jiang, Guoqing Zu, Wei Du… in Metals and Materials International (2016)

  13. No Access

    Article

    High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air

    The high temperature oxidation behaviour of ferritic stainless steel SUS 430 was investigated over the temperature range from 1000 to 1150 °C in humid air containing 18% water vapour. Isothermal thermogravimet...

    **awei Cheng, Zhengyi Jiang, Dongbin Wei… in Metals and Materials International (2015)