Skip to main content

20 Result(s)

within Zheng** Jiang Remove this filter English Remove this filter Solid Mechanics Remove this filter

and

  1. No Access

    Article

    High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air

    The high temperature oxidation behaviour of ferritic stainless steel SUS 430 was investigated over the temperature range from 1000 to 1150 °C in humid air containing 18% water vapour. Isothermal thermogravimet...

    **awei Cheng, Zhengyi Jiang, Dongbin Wei… in Metals and Materials International (2015)

  2. No Access

    Article

    Effect of different grinding aids on property of granulated blast furnace slag powder

    The objective of this study was to assess the feasibility of utilization of grinding aids (GA) in the granulated blast furnace slag (GBFS) powder production. The GBFS powders were prepared with different GA, a...

    Haoxin Li, **aojie Yang, Zhengwu Jiang, Zhi Suo, Guofang Zhang… in Materials and Structures (2015)

  3. No Access

    Article

    Flow behaviour and constitutive modelling of a ferritic stainless steel at elevated temperatures

    The flow behaviour of a ferritic stainless steel (FSS) was investigated by a Gleeble 3500 thermal-mechanical test simulator over the temperature range of 900–1100 °C and strain rate range of 1–50 s−1. Empirical a...

    **gwei Zhao, Zhengyi Jiang, Guoqing Zu, Wei Du… in Metals and Materials International (2016)

  4. No Access

    Article

    Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method

    Based on our latest work, a differential-scheme based micromechanical framework is presented to predict the properties of saturated concrete repaired by the electrochemical deposition method (EDM), which inves...

    Qing Chen, Zhengwu Jiang, Zhenghong Yang, Hehua Zhu… in Materials and Structures (2016)

  5. No Access

    Article

    Experimental investigation on hysteretic behavior of thin-walled circular steel tubes under constant compression and biaxial bending

    This paper presents a comprehensive experimental and numerical investigation on hysteretic behavior of thin-walled circular steel tubes as loaded members in reticulated shells. The experimental setup available...

    Jian Cai, Sheng He, Zhengrong Jiang, Qingjun Chen, Zhiliang Zuo in Materials and Structures (2016)

  6. No Access

    Article

    Differential-scheme based micromechanical framework for unsaturated concrete repaired by the electrochemical deposition method

    Most concrete structures repaired by the electrochemical deposition method (EDM) are not fully saturated in reality. Based on our latest work, a differential-scheme-based micromechanical framework is presented...

    Qing Chen, Zhengwu Jiang, Zhenghong Yang, Hehua Zhu, J. Woody Ju… in Acta Mechanica (2017)

  7. No Access

    Article

    A stochastic micromechanical model for fiber-reinforced concrete using maximum entropy principle

    A stochastic micromechanical framework is presented to predict the probabilistic behavior of the fiber-reinforced concrete (FRC) using the maximum entropy principle. The FRC is represented as a multiphase comp...

    Qing Chen, Hehua Zhu, J. Woody Ju, Zhiguo Yan, Changhong Wang… in Acta Mechanica (2018)

  8. No Access

    Article

    Effect of Ni Addition on Bainite Transformation and Properties in a 2000 MPa Grade Ultrahigh Strength Bainitic Steel

    The effects of Nickle (Ni) addition on bainitic transformation and property of ultrahigh strength bainitic steels are investigated by three austempering processes. The results indicate that Ni addition hinders...

    Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu… in Metals and Materials International (2018)

  9. No Access

    Article

    Catenary Equation-Based Approach for Force Finding of Cable Domes

    Cable forces along the cable length direction vary with deadweight. An invariant that is horizontal component force along the cable length, is introduced to characterize prestress distribution of cable domes. ...

    Zhengrong Jiang, **aowei Liu, Kairong Shi… in International Journal of Steel Structures (2019)

  10. No Access

    Article

    Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels

    In the present research, the effects of Nickel (Ni) and Chromium (Cr) on cryogenic impact toughness (CIT) of low-carbon bainite/martensite multiphase steels [processed by two different cooling processes: isoth...

    Zishan Yao, Guang Xu, Zhengyi Jiang, Junyu Tian… in Metals and Materials International (2019)

  11. No Access

    Article

    Differential scheme-based stochastic micromechanical framework for saturated concrete repaired by EDM

    A stochastic micromechanical framework is proposed to quantitatively characterize the probabilistic behavior of the saturated concrete healed by the electrochemical deposition method (EDM). Multiphase micromec...

    Qing Chen, Rui Ma, Zhengwu Jiang, Hehua Zhu, Haoxin Li, **nwen Yang… in Acta Mechanica (2019)

  12. No Access

    Article

    Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

    The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500 thermo-mechanical test simulator with a hydrawedge sy...

    Guoqing Zu, Yukuan Lu, Yi Yan, **aoming Zhang… in Metals and Materials International (2020)

  13. No Access

    Article

    In-Situ Observation of Martensitic Transformation in a Fe–C–Mn–Si Bainitic Steel During Austempering

    The martensitic transformation in a Fe–C–Mn–Si bainitic steel was examined by in situ high-temperature laser scanning confocal microscopy (LSCM) and dilatometry. The phenomenon of continuous martensitic transf...

    Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu… in Metals and Materials International (2020)

  14. No Access

    Article

    Tuning the interfaces of Co–Co2C with sodium and its relation to the higher alcohol production in Fischer–Tropsch synthesis

    Catalytic conversion of the syngas into higher alcohols (HAs) via Fischer–Tropsch (F–T) synthesis is essential due to the widespread applications of HAs. The interfaces of cobalt and cobalt carbide (Co2C) are fou...

    Yang Liu, Shun He, Ruoou Yang, Fanfei Sun, Yuqi Yang… in Journal of Materials Science (2020)

  15. No Access

    Article

    Microstructure and texture evolution of cold-rolled low-Ni Cr–Mn–N austenitic stainless steel during bending

    Microstructure and texture evolution of a low-Ni Cr–Mn–N austenitic stainless steel were analysed during three-point bending process. The electron back-scattering diffraction (EBSD) was used to characterise th...

    Hamidreza Kamali, Haibo **e, Fanghui Jia, Hongyun Bi… in Journal of Materials Science (2021)

  16. No Access

    Article

    Multiscale Interface Stress Characterisation in Cold Rolling

    This paper provides a comprehensive review on the multiscale characterisation of interface stresses in cold rolling considering both the random asperity deformation and lubrication. The characterisation of the...

    Chuhan Wu, Liangchi Zhang, Peilei Qu, Shanqing Li… in Metals and Materials International (2021)

  17. No Access

    Article

    Effects of strain rate on the microstructure and texture evolution of a TRIP-TWIP metastable austenitic stainless steel during bending

    Microstructure evolution, deformation-induced martensitic transformation and texture evolution were investigated in a metastable austenitic stainless steel during bending under various strain rates ranging from έ

    Hamidreza Kamali, Haibo **e, Hongyun Bi, E. Chang… in Journal of Materials Science (2022)

  18. No Access

    Article

    Microstructure-Based Modelling of Elastoplastic Properties and Deformation Characteristics of Advanced High Strength Dual-Phase Steel

    The 3D representative volume element modelling concerning different microstructural features and renowned work hardening models was developed in this study. Simulation results of stress–strain relationship bas...

    Mingshuai Huo, Haibo **e, Tao Zhang, Lianjie Li… in Metals and Materials International (2023)

  19. No Access

    Article

    Design of a robust LMI-based H∞ observer for the state of charge estimation in lithium-ion batteries

    Designing a robust Hꝏ observer to estimate the state of charge (SoC) of lithium batteries for various applications, including microgrids, is the principal goal of the present article. Battery dynamic models al...

    Baofan Chen, Chunrong Zhou, Zhenghong Jiang in Multiscale and Multidisciplinary Modeling,… (2024)

  20. No Access

    Article

    A Study on the Microstructural Evolution, Interfacial Diffusion and Mechanical Properties of Ultra-thin Stainless Steel–Copper Composites Fabricated by Roll Bonding

    Systematic study on the microstructural evolution, interfacial diffusion and mechanical properties of ultra-thin stainless steel–copper composites (50 µm) after annealing treatment was conducted in the present...

    Yanyang Qi, **aoguang Ma, Linan Ma, Cunlong Zhou… in Metals and Materials International (2024)