Skip to main content

previous disabled Page of 3
and
  1. No Access

    Article

    Highly efficient photo-thermal synergistic catalysis of CO2 methanation over La1−xCexNiO3 perovskite-catalyst

    Solar-driven photo-thermal catalytic CO2 methanation reaction is a promising technology to alleviate the problems posed by greenhouse gases emissions. However, designing advanced photo-thermal catalysts remains a...

    Ting Li, Zhen-Yu Zhang, De-Cun Luo, Bo-Yu Xu, Rong-Jiang Zhang in Nano Research (2024)

  2. No Access

    Article

    Microstructure Evolution and Nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting (CoCrNi)82Al9Ti9 High-Entropy Alloy

    In this work, the phase evolution mechanism and nanomechanical properties of (CoCrNi)82Al9Ti9 high-entropy alloy (HEA) prepared by selective laser melting (SLM) in the molten pool were studied. This HEA contains ...

    Hong-Wei Zhang, Li-Wei Lan, Zhe-Yu Yang in Acta Metallurgica Sinica (English Letters) (2024)

  3. No Access

    Article

    A Micro-arc Oxidation/Poly(1,3-Trimethylene Carbonate) Hybrid Coating for Anticorrosion and Hemocompatibility Enhancement of High-Purity Magnesium

    Magnesium (Mg) and its alloys possess good mechanical support and biodegradability, exhibiting enormous potential in the field of vascular stents. However, the rapid degradation results in premature loss of me...

    Mingcheng Feng, Qingyun Fu, Jian Li in Metallurgical and Materials Transactions A (2024)

  4. No Access

    Article

    Direct ink writing of multifunctional gratings with gel-like MXene/norepinephrine ink for dynamic electromagnetic interference shielding and patterned Joule heating

    Intelligent electromagnetic interference (EMI) shielding modulators with a wide tuning range and cyclic stability are urgently needed but their fabrication remains challenging. A gel-like MXene/norepinephrine ...

    Pei-Zhu Jiang, Zhiming Deng, Peng Min, Lvxuan Ye, Cheng-Zhang Qi in Nano Research (2024)

  5. No Access

    Article

    Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

    Develo** an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the ...

    Feng-Yang Chen, Chang Qiu, Zhen-Yu Wu, Tae-Ung Wi, Y. Zou Finfrock in Nano Research (2024)

  6. Article

    Open Access

    Novel nanotherapeutics for cancer immunotherapy by albumin nanoparticles functionalized with PD-1 and PD-L1 aptamers

    PD-1/PD-L1 blockade plays a crucial role in cancer immunotherapy. Exploration of new technologies to further enhance the efficacy of PD-1/PD-L1 blockade is therefore of potential medical importance. Nanotherap...

    Qi** Jiang, Fengjiao Yao, Yacong An, **alian Lai, Xundou Li in Cancer Nanotechnology (2024)

  7. No Access

    Article

    Compression Behavior and Failure Mechanisms of Bionic Porous NiTi Structures Built via Selective Laser Melting

    Inspired by the crystal microstructure of metals and the bamboo, the bionic porous NiTi structures with the porosities in the range of 75.8%–84.9% were built via selective laser melting (SLM). The compression ...

    **aolong Zhang, Yue Jiang, Shupeng Wang in Acta Metallurgica Sinica (English Letters) (2023)

  8. No Access

    Article

    Large-scale synthesis of low-cost 2D metal-organic frameworks for highly selective photocatalytic CO2 reduction

    Two-dimensional metal-organic frameworks (2D MOFs), as a new type of 2D materials, have been widely applied in various applications because of their unique structures and exposed active sites. Herein, we repor...

    Ning-Yu Huang, Zhen-Yu Chen, Fei-Long Hu, Chun-Yan Shang, Wenjuan Wang in Nano Research (2023)

  9. No Access

    Article

    Self-assembled silica aerogel-coated polylactic acid membrane for water-in-oil emulsion separation

    The separation of oil-water system is of great significance to environmental protection, but the efficient separation of water-in-oil emulsions with emulsifier still faces challenges. Herein, the hydrophobic s...

    Chunshuai Lu, **anhua Lang, Zhen Yu in Journal of Sol-Gel Science and Technology (2023)

  10. No Access

    Article

    In vivo bioorthogonal labeling of rare-earth doped nanoparticles for improved NIR-II tumor imaging by extracellular vesicle-mediated targeting

    The development of efficient contrast agents for tumor-targeted imaging remains a critical challenge in the clinic. Herein, we proposed a tumor-derived extracellular vesicle (EV)-mediated targeting approach to...

    Hui Li, Yanfeng Zhong, Shumin Wang, Menglei Zha, Wenxing Gu, Guoyong Liu in Nano Research (2023)

  11. No Access

    Article

    Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis

    Iridium-based electrocatalysts remain the only practical anode catalysts for proton exchange membrane (PEM) water electrolysis, due to their excellent stability under acidic oxygen evolution reaction (OER), bu...

    Zhen-Yu Wu, Feng-Yang Chen, Boyang Li, Shen-Wei Yu, Y. Zou Finfrock in Nature Materials (2023)

  12. No Access

    Article

    High-performance three-dimensional SnO2–Sb electrode supported on titanium foam substrate prepared by solvothermal process

    Three-dimensional (3D) Ti/SnO2–Sb electrode is promising for electrochemical oxidation process (EAOP) application, while hindered by uneven and low catalysts loading, especially on the inner surface of porous sub...

    Yi Sun, Beichen **, Tang Qian, Ruonan Gu, Zhen Yu in Journal of Materials Research (2022)

  13. No Access

    Article

    Efficient conversion of low-concentration nitrate sources into ammonia on a Ru-dispersed Cu nanowire electrocatalyst

    Electrochemically converting nitrate ions, a widely distributed nitrogen source in industrial wastewater and polluted groundwater, into ammonia represents a sustainable route for both wastewater treatment and ...

    Feng-Yang Chen, Zhen-Yu Wu, Srishti Gupta, Daniel J. Rivera in Nature Nanotechnology (2022)

  14. No Access

    Article

    Strong and conductive reduced graphene oxide-MXene porous films for efficient electromagnetic interference shielding

    Lightweight, flexible, and electrically conductive porous films are promising for efficient electromagnetic interference (EMI) shielding. However, the mechanical and electrical properties of porous films are f...

    Yu Zhang, Ming-Ke Xu, Zhenguo Wang, Tianyu Zhao, Liu-**n Liu in Nano Research (2022)

  15. No Access

    Article

    Size Effects on Dissolution Kinetics of Y-Enriched Precipitates in FeCrAlY Alloys During High-Temperature Oxidation

    Our previous work demonstrated that the size of Y-enriched precipitates in FeCrAlY alloys have significant effects on their oxidation resistance. In the present work, the precipitate dissolution kinetics durin...

    Jian Li, Guang-Ming Cao, Chun-Yuan Cui in Metallurgical and Materials Transactions B (2022)

  16. No Access

    Article

    Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

    In the present paper, a novel method was developed to predict the dynamic recrystallization (DRX) behavior during hot rolling based on machine learning in combination with physical models of niobium (Nb) micro...

    **n Li, **ao-Guang Zhou, Guang-Ming Cao in Metallurgical and Materials Transactions A (2021)

  17. No Access

    Article

    Effect of grit blasting and subsequent heat treatment on stress rupture property of a Ni-based single-crystal superalloy SGX3

    In the present study, the effect of grit blasting and subsequent heat treatment on the stress rupture properties of a third-generation nickel-based single-crystal superalloy SGX3 sheet was studied. It was foun...

    **shan He, Zhengrong Yu, Longfei Li in Acta Metallurgica Sinica (English Letters) (2020)

  18. No Access

    Article

    Triaxial Constraint and Tensile Strength Enhancement in Brazed Joints

    A brazed joint consists of a low-melting point and thin interlayer sandwiched between the high-melting-point base materials, in which the interlayer strength is typically lower than that of the base material. ...

    **n Cai, Yanfei Gao, Xue Wang, Wei Zhang in Metallurgical and Materials Transactions A (2020)

  19. No Access

    Article

    Low-Cycle Fatigue and Creep-Fatigue Behaviors of a Second-Generation Nickel-Based Single-Crystal Superalloy at 760 °C

    Low-cycle fatigue (LCF) behaviors of a second-generation nickel-based single-crystal superalloys with [001] orientation at 760 °C have been investigated. Different strain amplitudes were introduced to investig...

    Jian Zhang, Yuan-Yuan Guo, Mai Zhang in Acta Metallurgica Sinica (English Letters) (2020)

  20. No Access

    Article

    Enhancing High-Temperature Strength and Thermal Stability of Al2O3/Al Composites by High-Temperature Pre-treatment of Ultrafine Al Powders

    Amorphous Al2O3-reinforced Al composite (am-Al2O3/Al) compacted from ultrafine Al powders for high-temperature usages confronts with drawbacks because crystallization of am-Al2O3 at high temperatures will result ...

    Yu-Ning Zan, Yang-Tao Zhou, **ao-Nan Li in Acta Metallurgica Sinica (English Letters) (2020)

previous disabled Page of 3