![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Evaluating the Performance of Large-Diameter Bored Piles Socketed in Weathered Rock
The current design practice of the bored piles socketed in rock often ignores the end-bearing resistance and relies only on the side shaft resistance. This is due to the accumulation of soft soils as a result ...
-
Article
Multi-disciplinary Optimization of Wing Sandwich Structure using Proper Orthogonal Decomposition and Automatic Machine Learning
The coupling between different disciplines for multi-disciplinary optimization greatly increases the complexity of a computational framework, while at the same time increasing CPU time and memory usage. To ove...
-
Article
Parametric study on the local current distribution of polymer electrolyte membrane fuel cell with counter flow channel under pressurized condition
Local measurement of current was conducted using a segmented cell to understand local electrochemical characteristics of polymer electrolyte membrane fuel cell with counter flow channel under pressurized condi...
-
Chapter and Conference Paper
Soil Stabilization by Using Alkaline-Activated Ground Bottom Ash Coupled with Red Mud
This study evaluates the feasibility of incorporating bottom ash and red mud into a binder to stabilize soil. In this study, the bottom ash collected from Honam Thermal Power Plant in South Korea was ground t...
-
Chapter and Conference Paper
Thermal Conductivity of Controlled Low Strength Material (CLSM) Made with Excavated Soil and Coal Ash
This paper focused on the quantitative evaluation of thermal conductivity of CLSM made with excavated soil and coal ash for a possible use as thermal grout for borehole heat exchangers. In a preliminary study...
-
Article
Influence of curing conditions on engineering properties of controlled low strength material made with cementless binder
As an evaluation of the use of Controlled Low Strength Material (CLSM) in highway construction applications (e.g., backfill, utility bedding, void fill and bridge approaches), the need for adequate curing cond...
-
Article
Local electrochemical characteristics at various operating pressure and temperature values using a segmented polymer electrolyte membrane fuel cell
The pressurization of reactant gases is one of the solutions for generating considerable power in a polymer electrolyte membrane fuel cell with a restricted size. Electrochemical phenomena, such as current den...
-
Article
Numerical analysis on the effect of voltage change on removing condensed water inside the GDL of a PEM fuel cell
Decreasing the voltage of a fuel cell through hydrogen mixing or using low-air stoichiometry ratio is beneficial to remove condensed water inside GDL under flooding condition. In this study, the effect of volt...
-
Article
Multidisciplinary design optimization of a structurally nonlinear aircraft wing via parametric modeling
In this study, the optimization of an aircraft wing design was conducted using multidisciplinary design optimization (MDO), which integrates aerodynamic and structural analysis in considering nonlinear structu...