151 Result(s)
-
Article
An Experimental Method for Stereo-DIC Measurement of Large-Scale Thin-Film Structures
Due to their flexible configuration and lightweight characteristics, film structures have gained significant attention in the field of aerospace engineering. The scales of film structures typically range from ...
-
Article
Recent Advances in the Regulation of Oxygen Vacancies in MnO2 Nanocatalysts
Enhanced oxygen vacancy (VO) has been designated as an effective strategy to prepare high-performance MnO2 nanocatalysts for the oxidation of volatile organic compounds (VOC) for thereof unbalanced electronic str...
-
Article
Tensile Construction Monitoring and Progressive Collapse Test of Suspen-Dome Structure Based on UAV-Assisted Close-Range Photogrammetry and Multi-Camera Stereo-Digital Image Correlation
The widespread use of large-space structures has led to a subsequent increase in the demand for the inspection and monitoring of engineering structures. Digital construction of engineering structures poses a c...
-
Article
Thermoresponsive copolymers based on synthetic porphyrin derivatives
Porphyrins and their derivatives may find a variety of applications in biomedical fields due to their interesting photochemical and photophysical properties. A tetraphenylporphyrin (TPP)-based methacrylate mon...
-
Article
A rigid body dynamics simulation enhanced representative volume element builder for CNT/Al composite
A novel representative volume element (RVE) builder is developed to solve the strong “framing effect” problem in previous RVE builders. Taking advantage of rigid body dynamics simulation, the new RVE builder c...
-
Article
Numerical Simulations of Modal Tests on Yingzhou Bridge Using a Passing Vehicle as the Excitation
Modal tests using ambient excitations might lead to inaccurate results for bridges with the fundamental natural frequencies greater than 1 Hz. Modal tests using passing vehicles as the excitations are proposed...
-
Article
Study on the Dynamic Response of Concrete-Filled Steel Tubular Long Column under Impact Load
In this study, a refined finite element model of concrete-filled steel tubular column was established, and its dynamic response under impact axial load was explored. By extracting the axial stress changes of t...
-
Article
Fatigue Behavior of B30AVH1500 Electric Sheet Material
This study aimed to investigate the fatigue behavior of B30AVH1500 electric steel material. Also, fatigue specimens retaining the structural characteristics of the rotor were designed and tested. The fatigue t...
-
Article
Microstructure and Mechanical Properties of 2A14-T4 Alloy T-Joint Connected by Stationary Shoulder Friction Stir Welding
In this study, the evolution of microstructure and mechanical properties of the 2A14-T4 aluminum alloy stationary shoulder friction stir welding (SSFSW) of a T-joint was analyzed. The results showed that the w...
-
Article
Modulation on the electrical and optical properties of Na and Rh co-doped Ruddlesden-Popper layered Ca3Ti2O7
Layered perovskite Ca2.91Na0.09Ti2-xRhxO7 (x = 0.00, 0.02, 0.04, 0.06) were synthesized by a conventional solid-state reaction. Room temperature ferroelectricity has been confirmed. The remanent polarization incr...
-
Article
The Simulation of Post-Heat Treatment in Selective Laser Melting Additive Manufacturing
Post-heat treatment takes a key role for the enhancement of mechanical properties in selective laser melting (SLM) additive manufacturing (AM) of 6xxx series aluminum alloy. To understand the basic mechanism f...
-
Article
Real-time 3D Digital Image Correlation for Large Deformation and Rotation Measurements Based on a Deformation Transfer Scheme
With the recent increase in digital image correlation (DIC) applications, it is important to improve the computational efficiency of DIC and realize the closed loop control of systems.
-
Article
Isothermal Holding Treatment of a Transformation-Induced Plasticity Steel for Obtaining Ultrahigh Strength and High Plasticity
The determining significance of isothermal holding on microstructure and mechanical properties of a transformation-induced plasticity steel (Fe-1.67Mn-1.32Al-0.55Si-0.47C) was studied with multiple techniques ...
-
Article
Formation of Refined Grain Size Less Than 5 nm and Nano-sized Undulations in the Bonding Interface Region of an Ultrasonic Spot Welded Cu/Ni Joint
The microstructure in the bonding interface region of an ultrasonic spot welded Cu/Ni joint was investigated. At the copper side near the bonding interface, all the refined grains with random orientations and ...
-
Article
Physical Model Based on Data-Driven Analysis of Chemical Composition Effects of Friction Stir Welding
Variations in chemical compositions can lead to changes in the mechanical properties during friction stir welding (FSW). To facilitate control over the final mechanical properties of the friction stir weld, th...
-
Article
Improved photocatalytic activity of Z-scheme β-Bi2O3/Bi2WO6 nanocomposites from band bending of p-n heterojunction
Photocatalytic β-Bi2O3/Bi2WO6 p-n heterojunctions were synthesized by two-step solvothermal method, and then, the phase structure, microstructures, and band structures were characterized with XRD, EDS, N2 adsorpt...
-
Article
Influence of Particle Size on Apparent Diffusivity During Spark Plasma Sintering of Crystalline Powders
A theoretical framework is presented to determine an apparent diffusivity D during powder sintering and further elucidate the underlying interrelation between D and shrinkage behaviors of powders. Furthermore, to...
-
Article
Self-assembly synthesis of AgNPs@g-C3N4 composite with enhanced electrochemical properties for supercapacitors
AgNPs@g-C3N4 composite was synthesized from Ag-containing sol and g-C3N4 powder by the ultrasonic-assisted self-assembly method. The composite has hierarchical pore size distributions, which will be beneficial to...
-
Article
Enhanced Sintering Behaviour and Microwave Dielectric Properties of CaLa4Ti4O15 Ceramics with ZnO–B2O3 Addition
Effects of ZnO-B2O3 (ZB) addition have been investigated on the sintering behavior, structure and microwave dielectric properties of CaLa4Ti4O15 ceramics. The sintering temperature of CaLa4Ti4O15 ceramics with a ...
-
Article
Microstructure Evolution and Stress Corrosion Cracking Susceptibility of 12Cr Martensitic Steel Upon Long-Term Service in Power Plants
After 230,000-h long-term service at 550 °C/13.7 MPa, the microstructure of a kind of 12Cr martensitic steel was investigated using scanning electron microscopy, backscattering electron microscope and x-ray di...