Skip to main content

148 Result(s)

within Wentao **a Remove this filter Materials Science Remove this filter Characterization and Evaluation of Materials Remove this filter

previous disabled Page of 8
and

  1. No Access

    Article

    Mechanical Response and Failure Mechanism of AFRP-repaired Corroded CHS Tubes Under Axial Compression

    Corrosion-induced defects, extensive and unavoidable in marine structures, pose significant threats to structural integrity and safety. This study aims to assess mechanical response and investigate the failure...

    Changzi Wang, **aofei Cui, Yufeng Jiang, Lingjun **e… in Applied Composite Materials (2024)

  2. No Access

    Article

    Controllable preparation and properties of boron-doped carbon aerogel composites

    Carbon aerogels represent a highly promising category of carbon materials with extensive application prospects in insulation, adsorption, catalysis, and battery technologies. Nevertheless, the current preparat...

    Wentao Zhao, Sirui Cao, Yufeng Jiao… in Journal of Materials Science: Materials in… (2024)

  3. No Access

    Article

    Fabrication of flexible nitrogen-doped graphene micro-supercapacitors by laser-induced self-made precursors

    With the wide application of portable wearable devices, a variety of electronic energy storage devices, including micro-supercapacitors (MSCs), have attracted wide attention. Laser-induced graphene (LIG) is wi...

    Zhiru Yang, **xing Li, Jiaoyi Wu, Hai Zhou, Wentao Hou in Carbon Letters (2024)

  4. No Access

    Article

    Triboelectric and piezoelectric materials for smart health in human-integrated healthcare systems

    This paper presents a comprehensive exploration of the role of smart materials, specifically triboelectric and piezoelectric materials, in the context of human-integrated healthcare systems. The study begins b...

    Reza Mohsenian, Ali Matin Nazar, Fatemeh Ranjbar… in MRS Communications (2024)

  5. No Access

    Article

    Influence of Mn–Si elements on the kinetics of oxidative phase transformation under continuous cooling conditions and modeling study

    In this paper, a simultaneous thermal analyzer carried out isothermal eutectoid transformation experiments of Fe–0.4Mn, Fe–1.2Mn, and Fe–1.2Mn–0.2Si alloys. The kinetic model of the isothermal phase transforma...

    Guangming Cao, Wencong Zhao, Wentao Song, Hengxiang Yu… in Journal of Materials Science (2024)

  6. No Access

    Article

    Construction of rod-like micro/nano structure and its effects on the electrochemical energy storage performance of lithium-rich manganese-based cathode material

    By adjusting the oxidant amount and hydrothermal reaction temperature, a rod-shaped MnO2 sample was formed. Taking it as the manganese source, a Li-rich manganese-based cathode material (LMCM) with obvious rod-li...

    Hu Lei, Song **, Lan Jiayi, Xue Wentao… in Journal of Materials Science: Materials in… (2024)

  7. No Access

    Article

    Effects of Forming Specific Pressure and Filling Speed on Microstructure and Mechanical Properties of Thin-Walled CuSn10P1 Alloy Parts by Rheological Squeeze Forming

    Semi-solid rheological squeeze forming has distinct advantages over traditional casting and forming techniques. In this study, a high-performance thin-walled CuSn10P1 alloy was successfully produced by combini...

    Wentao **ong, Rongfeng Zhou, Zhangxing Liu, Ke Wen… in International Journal of Metalcasting (2024)

  8. No Access

    Article

    Microstructure and Low-Temperature Toughness of Reheated Coarse-Grained Heat-Affected Zone of 06Ni9DR Steel

    The microstructure and low-temperature impact toughness of the reheated coarse-grained heat-affected zone (CGHAZ) of 06Ni9DR steel were investigated by using optical microscopy (OM), scanning electron microsco...

    Liying Li, Wentao **ao, Shengyuan Niu… in Journal of Materials Engineering and Perfo… (2024)

  9. No Access

    Article

    Numerical Analysis of Fluid Flow and Powder Transport Characteristics of RH-Degasser Ladle Bottom Powder Injection (RH-PBI) Process

    In this work, the RH-BPI refining process was numerically simulated by establishing a coupled gas–liquid-particle mathematical model. The deflection behavior of the gas-powder plume due to powder injection was...

    Zhuang Liu, Wentao Lou, Miaoyong Zhu in Metallurgical and Materials Transactions B (2024)

  10. No Access

    Article

    High Temperature Corrosion and Mechanical Properties of TiC-AlSi12 Composite Coating Fabricated on Ti-6Al-4V Alloy Substrate via High-Energy Mechanical Alloying Method

    The TiC-AlSi12 composite coating was successfully prepared on Ti-6Al-4V substrate via mechanical alloying. the process parameters including powder weight ratio and milling duration of coating fabrication were ...

    Jian Jiang, Tao Sun, Wentao Hou… in Journal of Materials Engineering and Perfo… (2024)

  11. Article

    Open Access

    The ultra-high electric breakdown strength and superior energy storage properties of (Bi0.2Na0.2K0.2La0.2Sr0.2)TiO3 high-entropy ferroelectric thin films

    The electric breakdown strength (Eb) is an important factor that determines the practical applications of dielectric materials in electrical energy storage and electronics. However, there is a tradeoff between Eb

    Wentao Yang, Sana Ullah, Guang** Zheng in Journal of Materials Science: Materials in… (2024)

    Download PDF (4859 KB) View Article

  12. No Access

    Article

    The Role of Carbon in Wear Resistance of CoCrFeNiTi0.5 High-Entropy Alloy Layer

    The influence of C do** on the phase and microstructure of CoCrFeNiTi0.5Cx high-entropy alloy layer is revealed in this study, and C do** improves the microhardness and wear resistance successfully. It is fou...

    Ying Zhang, Wentao Hou, **cheng Yu… in Journal of Materials Engineering and Perfo… (2024)

  13. No Access

    Article

    Influence of Component Size on the Corrosion Behavior of Ti6Al4V Alloy Fabricated by Electron Beam Powder Bed Fusion

    The electrochemical behavior of Ti–6Al–4V with 1 mm and 16 mm thickness prepared by electron beam powder bed fusion (EB-PBF) was investigated in phosphate buffered saline. Electrochemical results showed that E...

    Hongyu Zheng, **n Gai, Yun Bai, Wentao Hou… in Acta Metallurgica Sinica (English Letters) (2024)

  14. No Access

    Article

    Facile and controllable synthesis of nitrogen self-doped chitosan-derived carbon for high-performance Li-ion batteries

    N-do** content and configurations have a significant effect on the electrochemical performance of carbon anodes. Herein, we proposed a simple method to synthesize highly N self-doped chitosan-derived carbon ...

    Wentao **a, Miao Cheng, **g Hu, Qianqian Liu, Tao Wei, Ruirui Wang… in Carbon Letters (2024)

  15. No Access

    Article

    Numerical Simulation of Particle Motion and Wall Scouring Behavior in Steelmaking Converter With Bottom Powder Injection

    The coupled Eulerian-multifluid VOF-granular flow model was built to simulate gas–liquid-particle three-phase flow in a 120-ton steelmaking converter with bottom powder injection. Particle transport phenomenon...

    **gshi Zhang, Wentao Lou, Miaoyong Zhu in Metallurgical and Materials Transactions B (2023)

  16. No Access

    Article

    A Hot Cracking Initiation Criterion Based on Solidification Liquid Film Characteristic and Microstructure

    Herein, a hot cracking initiation criterion based on the characteristics of solidification liquid film and the microstructure was proposed, which integrated both the mechanical and non-mechanical factors durin...

    Ming Su, Wentao Zheng, Chunyu Yue… in Acta Metallurgica Sinica (English Letters) (2023)

  17. No Access

    Article

    Relaxor regulation and enhancement of energy storage properties in bi-modified Sr2NaNb5O15-based tetragonal tungsten bronze ceramics

    Dielectric capacitors based on the relaxor ferroelectric ceramic with large discharge power density offer significant advantages for advanced pulsed power systems. Tungsten bronze-based relaxor ceramics have e...

    Kaicheng Yu, **nzhong Zhang, Wentao Zhong… in Journal of Materials Science: Materials in… (2023)

  18. No Access

    Article

    Dual Strengthened Control of Recrystallization Behavior on CVCDE Magnesium Alloy Containing Characteristic Structure

    Various characteristic structures in typical magnesium alloys, including dislocation cells, substructures and twins, have an important influence on the dynamic recrystallization behavior, and the DRX (dynamic ...

    Nan Bian, Feng Li, Wentao Niu, Chao Li… in Acta Metallurgica Sinica (English Letters) (2023)

  19. No Access

    Article

    The sensitivity and specificity of carbon dot species on the detection of chromium metal ions

    Rapid industrialization has brought about Cr6+ pollution, and the excellent performance of carbon dots (CDs) provides a new idea for preparing environmentally friendly nanoprobes for Cr6+ detection. In the presen...

    Ying Ren, Heng Zhou, Wentao Huang, Hongyu Li… in Journal of Materials Science: Materials in… (2023)

  20. No Access

    Article

    Study of the Effect of Ultrasonic Vibration on Nickel-Based Coating by Electrical Discharge Machining

    Surface modification of ASTM 1045 carbon steel using ultrasonic vibration-assisted automatic electric discharge machining (UAEDM) in gaseous media was carried out, aiming to investigate the effect mechanism of...

    Wentao Hou, Weiwei Xu, Zhenyu Zhou… in Journal of Materials Engineering and Perfo… (2023)

previous disabled Page of 8