Skip to main content

5 Result(s)

within W. S. Wang Remove this filter Materials Science Remove this filter

and

  1. No Access

    Article

    The effect of tungsten particle size on the processing and properties of infiltrated W-Cu compacts

    Three tungsten powders with average particle sizes of 8.7, 23.2, and 65.2 µm were used to make W-15Cu compacts. The compacting pressure and sintering temperature were adjusted for each powder to attain the desire...

    W. S. Wang, K. S. Hwang in Metallurgical and Materials Transactions A (1998)

  2. No Access

    Article

    The Behavior of Cyclic Voltammetry Strip** (CVs) with Tin-Doped Indium Oxide in 0.3M Hydrochloric Acid

    The cyclic voltammetry strip** (CVs) behavior of the tin-doped indium oxide (ITO) on SiO2 in 0.3M HCl is reported. The CVs result showed an obvious reduction-current peak that occurred during the first catho...

    K. C. Li, C. A. Huang, G. C. Tu, W. S. Wang in MRS Online Proceedings Library (2003)

  3. No Access

    Article

    Novel flame retardant epoxy/clay nanocomposites prepared with a pre-ground phosphorus-containing organoclay

    A series of novel epoxy/clay nanocomposites (EPOCg-x) were prepared with a selected epoxy resin and x wt% of a mechanically ground phosphorus-containing organoclay (POCg). The results of x-ray diffraction (XRD), ...

    Y.W. Chen-Yang, W.S. Wang, J.C. Tang, Y.W. Wu, H.S. Chen in Journal of Materials Research (2008)

  4. No Access

    Article

    Experimental Investigation of Exhaust Thermoelectric System and Application for Vehicle

    In this case study, an energy harvesting system using a thermoelectric power generator (TEG) has been constructed. Experimental investigation of the hot and cold sides of the thermoelectric modules (TMs) in th...

    X. Liu, Y. D. Deng, W. S. Wang, C. Q. Su in Journal of Electronic Materials (2015)

  5. No Access

    Article

    Optimization of Cooling Unit Design for Automotive Exhaust-Based Thermoelectric Generators

    Integrating a thermoelectric cooler (TEC) into the engine cooling system has various advantages including reducing additional mechanical parts, and saving energy and space for automotive applications. Based on...

    C. Q. Su, M. Xu, W. S. Wang, Y. D. Deng, X. Liu… in Journal of Electronic Materials (2015)