12 Result(s)
within
Satpal Sharma
Materials Science
-
Article
Correction: Finite element modeling of effective thermomechanical properties of Al–B4C metal matrix composites
-
Article
Evaluation of Properties of Glow Discharge Plasma Nitrided C-300 Maraging Steel
In this study, Glow Discharge Plasma Nitriding (GD_PN) of C-300 maraging steel is conducted at 425 °C to 500 °C for 4 h using \(\text{H}_{2}\)
-
Article
Influence of FSW Process Parameters on Formability and Mechanical Properties of Tailor Welded Blanks AA6082-T6 and AA5083-O Using RSM with GRA-PCA Approach
Tailor welded blank sheets made of friction stir welding (FSW) process have found many applications in aerospace, automobile, marine, and other industries. In the present study, two different aluminum alloys A...
-
Article
Retraction Note to: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave Welding
The Editor has retracted this article (1) because concerns have been raised regarding some of the figures. Figure 3 part B appears to be a copy of Figure 3 part A, with some alterations.
-
Article
Fabrication and Investigation of Co-based and CeO2-modified Microwave Coatings
This paper explore the viability of novel microwave hybrid heating, Co-based coatings without CeO2 (unmodified) and with CeO2 (modified) in varying wt % (1, 2 and 3 wt %) were developed. The coatings were develop...
-
Article
Friction and Adhesive Wear Study of HVOF Sprayed Ni–WC–Co-Based Powder Coating
Ni-based alloys are being widely used to improve the wear resistance of various industrial components in normal and severe environments and addition of rare earth elements to these alloys further improves the ...
-
Article
Finite element modeling of effective thermomechanical properties of Al–B4C metal matrix composites
The present work aims to investigate the influences of thermal residual stresses and material properties on the thermomechanical deformation behavior of Al–B4C composites. Boron carbide-reinforced aluminum matrix...
-
Article
Parametric Study of Dry Sliding Wear Behavior of Hybrid Metal Matrix Composite Produced by a Novel Process
In the present research work, silicon nitride (Si3N4) and graphite (Gr) ceramic powders are ball milled to obtain homogeneous mixing and consistent density of combined powder. The ball-milled powder is used as re...
-
Article
RETRACTED ARTICLE: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave Welding
This paper presents an experimental study on the tensile strength of 1018 mild steel plates joined by microwave welding. Three different microwave ovens with rated power of 800, 850, and 900 W and fixed freque...
-
Article
Parametric Study to Correlate the Applied Factors and Abrasive Wear Resistance of HVOF Coating
Co-Ni-base powder was modified with the addition of CeO2 to study the effect of CeO2 addition on microstructure, hardness, and abrasive wear behavior of the unmodified (without CeO2) and modified (with CeO2) HVOF...
-
Article
Abrasive Wear Study of Rare Earth Modified Coatings by Statistical Method
This paper describes the effect of combined addition of rare earth elements namely CeO2 and La2O3 in Ni-base alloy coatings. The rare earth addition refines microstructure, increases hardness, and abrasive wear r...
-
Article
Erosive Wear Study of Rare Earth-Modified HVOF-Sprayed Coatings Using Design of Experiment
In the present study, the effect of CeO2 addition in 1006 powder coatings on microstructure, microhardness, and high-temperature erosion resistance were studied. The CeO2 addition refines microstructure, forms ne...
