6 Result(s)
within
Ravi Ranjan Kumar
Quality Control, Reliability, Safety and Risk
-
Article
High-Temperature Behavior of Superalloy XH 62 in Compressive and Tensile Modes
Superalloy XH 62(Ni-Cr-Mo-Fe-Al) is studied for its high-temperature behavior under compressive and tensile mode of deformation at elevated temperatures. Gleeble thermo-mechanical simulator has been employed t...
-
Article
Hot Workability and Microstructure Control of Ti6Al4V Alloy
Titanium alloy Ti6Al4V has been recognized for its high strength-to-weight ratio. Extensive deformation study has been conducted; however, defects like strain-induced porosities, non-uniform microstructure, et...
-
Article
High-Temperature Deformation Behavior of Superalloy XH43
With an aim to study the hot workability and establish the safe working zone for Ni-based superalloy XH43, cylindrical specimens were subjected to hot isothermal compression test at different temperatures (117...
-
Article
Influence of Filler Metal on the Microstructure and Mechanical Properties of 316Ti–15-5 PH Stainless Steel Weld Joints
Dissimilar metal weld joints of austenitic stainless steel (SS) 316Ti and 15-5PH stainless steel were produced through gas tungsten arc welding (GTAW) using two different grades of filler wire, viz., ER316L (a...
-
Article
Metallurgical Characterization and Analysis of Locally Melted C-103(Nb-10Hf-1Ti) Sheet During Vacuum Heat Treatment
During vacuum annealing of C-103 (Nb-10Hf-1Ti) sheets, local melting was noticed at the locations they were in contact with commercially pure titanium (CP-Ti) base sheet. On metallurgical analysis, it was note...
-
Article
High-Temperature Tensile Behavior of Cu-3Ag-0.5Zr Alloy in the Solution-Treated Condition
In the present investigation, the high-temperature tensile behavior of Cu-3Ag-0.5Zr alloy in the solution-treated condition was evaluated in the temperature range of 27-700 °C using tensile testing, optical, s...
