Skip to main content

35 Result(s)

within Qudong Wang Remove this filter

previous disabled Page of 2
and

  1. No Access

    Article

    Dam** capacity of SiCw/MgLiAl composites

    Chunjiang Ma, Di Zhang, Wenjiang Ding, Qudong Wang in Journal of Materials Science Letters (2001)

  2. No Access

    Article

    Effect of Si on the precipitation behavior of Mg-6Al alloy

    Yizhen Lu, Qudong Wang, **aoqin Zeng, Wenjiang Ding… in Journal of Materials Science Letters (2001)

  3. No Access

    Article

    Effect of Sb on the microstructure and mechanical properties of AZ91 magnesium alloy

    Effects of Sb addition on the microstructure, mechanical properties, and fracture behaviors of AZ91 magnesium alloy, as well as the sensitivity to section thickness of the structure and mechanical properties, ...

    Qudong Wang, Yan** Zhu, Wenzhou Chen… in Metallurgical and Materials Transactions A (2001)

  4. No Access

    Article

    Effect of Sb on the microstructure and mechanical properties of AZ91 magnesium alloy

    Effects of Sb addition on the microstructure, mechanical properties, and fracture behaviors of AZ91 magnesium alloy, as well as the sensitivity to section thickness of the structure and mechanical properties, ...

    Qudong Wang, Wenzhou Chen, Wenjiang Ding… in Metallurgical and Materials Transactions A (2001)

  5. No Access

    Article

    Functionally graded Zn-AI-Si in-situ composites fabricated by centrifugal casting

    Wenzhou Chen, Qudong Wang, Chunquan Zai… in Journal of Materials Science Letters (2001)

  6. No Access

    Article

    Behavior of Mg–Al–Ca alloy during solution heat treatment at 415 °C

    Man** Liu, Qudong Wang, Zili Liu, Guangyin Yuan… in Journal of Materials Science Letters (2002)

  7. No Access

    Article

    Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression

    Yongjun Chen, Qudong Wang, **bao Lin, Lujun Zhang… in Journal of Materials Science (2007)

  8. No Access

    Article

    Study on deformation behavior and strain homogeneity during cyclic extrusion and compression

    In this paper, the plastic deformation behavior and strain homogeneity of the ZK60 Mg alloy during the multi-pass cyclic extrusion and compression (CEC) was simulated using the finite-element method (FEM) with...

    **bao Lin, Qudong Wang, Liming Peng, Hans J. Roven in Journal of Materials Science (2008)

  9. No Access

    Article

    Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature

    The anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature (RT) was investigated by compressive and tensile testing in different directions, i.e. the loading axis orie...

    **Bao Lin, LiMing Peng, QuDong Wang… in Science in China Series E: Technological S… (2009)

  10. No Access

    Article

    Effects of samarium on microstructure and mechanical properties of Mg–Y–Sm–Zr alloys during thermo-mechanical treatments

    Microstructure and mechanical properties of Mg–4Y–xSm–0.5Zr (x = 1, 4, 8) alloys during thermo-mechanical treatments were investigated in this study. Mg–4Y–4Sm–0.5Zr alloy exhibits higher tensile strength but low...

    Daquan Li, Qudong Wang, Wenjiang Ding in Journal of Materials Science (2009)

  11. No Access

    Article

    Optimization of high-pressure die-casting process parameters using artificial neural network

    High-pressure die casting is a versatile process for producing engineered metal parts. There are many attributes involved which contribute to the complexity of the process. It is essential for the engineers to...

    Jiang Zheng, Qudong Wang, Peng Zhao… in The International Journal of Advanced Manu… (2009)

  12. No Access

    Article

    Effects of Ho on the microstructure and mechanical properties of Mg-Zn-Ho-Zr magnesium alloys

    The microstructure and mechanical properties of Mg-Zn-Ho-Zr alloys have been investigated in detail. The grain size of the as-cast Mg-Zn-Ho-Zr alloy was greatly decreased by the addition of Ho, and the grain g...

    Daquan Li, Qudong Wang, Wenjiang Ding in Rare Metals (2011)

  13. No Access

    Article

    Wear Properties of Hot-Extruded Pure Mg and Mg-1 wt.% SiC Nanocomposite

    This paper presents the wear properties of hot-extruded pure Mg and its composite reinforced with 1 wt.% SiC nanoparticles. Wear tests were performed under dry and oil sliding conditions using ball-on-flat con...

    Wei Guo, Qudong Wang, **aochun Li, Hao Zhou… in Journal of Materials Engineering and Perfo… (2015)

  14. No Access

    Chapter

    Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons

    Commercial magnesium alloys have a great potential for structural applications in automotive due to their significant weight saving. However, they have poor creep resistance at temperature over 125°C, thus mak...

    Kazutaka Okamoto, Masato Sasaki, Norikazu Takahashi… in Magnesium Technology 2011 (2016)

  15. No Access

    Chapter

    Indentation Creep Behavior of Mg-10Gd-3Y-0.5Zr (wt.%) Alloy at Elevated Temperatures

    The indentation creep behavior of a cast Mg-10Gd-3Y-0.5Zr (GW103) alloy was investigated by flat cylindrical indenter at temperatures ranging from 250 to 325 °C and stresses ranging from 80 to 505 MPa. The ind...

    Huan Wang, Qudong Wang, Jie Yuan in Magnesium Technology 2014 (2016)

  16. No Access

    Chapter

    Applicability of Mg -Zn-(Y, Gd) Alloys for Engine Pistons

    Commercial magnesium alloys have a great potential for structural applications in automotive due to their significant weight saving. However, they have poor creep resistance at temperature over 125°C, thus mak...

    Kazutaka Okamoto, Masato Sasaki… in Essential Readings in Magnesium Technology (2016)

  17. No Access

    Article

    Analysis of Slip Activity and Deformation Modes in Tension and Tension-Creep Tests of Cast Mg-10Gd-3Y-0.5Zr (Wt Pct) at Elevated Temperatures Using In Situ SEM Experiments

    The tension and tension-creep deformation behavior at elevated temperatures of a cast Mg-10Gd-3Y-0.5Zr (wt pct, GW103) alloy was investigated using in situ scanning electron microscopy. The tests were performed a...

    Huan Wang, Carl J. Boehlert, Qudong Wang… in Metallurgical and Materials Transactions A (2016)

  18. No Access

    Article

    Dry Sliding Wear Properties of AZ31-Mg2Si Magnesium Matrix Composites

    AZ31-Mg2Si in situ composites were prepared from AZ31 Mg alloy and Si particles by a gravity casting method. Several parameters, such as Si content, normal load, and environmental temperature, were varied in orde...

    Wei Guo, De Wang, Yuan Fu, Li Zhang… in Journal of Materials Engineering and Perfo… (2016)

  19. No Access

    Article

    A Novel Method to Achieve Grain Refinement in Aluminum

    A significant grain refinement of pure aluminum is achieved upon addition of TiCN nanoparticles (NPs). Unlike the conventional inoculation, NPs can induce the physical growth restriction through the formation ...

    Kui Wang, Haiyan Jiang, QuDong Wang, Bing Ye… in Metallurgical and Materials Transactions A (2016)

  20. No Access

    Article

    Bonding of Aluminum Alloys in Compound Casting

    The influence of the coating materials, coating thickness, and casting process on the interfacial microstructure and mechanical properties of the overcast A6061 bars with aluminum A356 and A6061 alloys was stu...

    Jian Feng, Bing Ye, Lijie Zuo, Qudong Wang… in Metallurgical and Materials Transactions A (2017)

previous disabled Page of 2