Skip to main content

6 Result(s)

within O. R. Latypov Remove this filter Materials Science Remove this filter English Remove this filter

and

  1. No Access

    Article

    Improvement of Hot Rolling Technology to Reduce the “Rolled-in Scale” Defect

    Based on the results of the published literature and production experience, technical and technological measures were developed and implemented to reduce the «rolled-in scale» defect: collectors with water des...

    S. I. Platov, R. R. Dyoma, O. R. Latypov, V. S. Banshchikov… in Steel in Translation (2023)

  2. No Access

    Article

    Cutting Force during Face Milling of a Coarse- and Ultrafine-Grained VT6 Titanium Alloy

    Abstract—The results of an experiment on the face milling of a VT6 titanium alloy and an ultrafine-grained (UFG) VT6 titanium alloy fabricated by equal-channel angular pressing are analyzed. The technology of pro...

    D. A. Rastorguev, A. A. Sevast’yanov, G. V. Klevtsov… in Russian Metallurgy (Metally) (2022)

  3. No Access

    Article

    Technological Support for the Uniformity of Plastic Deformation during Thermal-Force Treatment

    Abstract—The problems of ensuring the uniformity of axial deformation distribution during the tension of cylindrical workpieces using a new technique for estimating deformation localization are considered. This e...

    D. A. Rastorguev, K. O. Semenov, R. R. Dema, R. N. Amirov… in Russian Metallurgy (Metally) (2022)

  4. No Access

    Article

    Effect of the Temperature–Speed Hot-Rolling Conditions on Scale Formation

    The influence of the parameters of a through technology on a rolled-in scale defect is analyzed. To study the influence of the temperature behind stand no. 6 of the 2000 hot-rolling mill in sheet rolling shop ...

    S. I. Platov, R. R. Dema, O. R. Latypov, V. S. Banshchikov… in Russian Metallurgy (Metally) (2021)

  5. No Access

    Article

    Modeling of the Thermal Processes in the Roll Fittings Rolls in Section Mills

    A model for the heat exchange of roll fittings rolls with a rolled piece and cooling water is considered. This thermal model can be used to determine the temperature of the rolls both in their volume and on th...

    N. Sh. Tyuteryakov, R. R. Dema, O. R. Latypov in Russian Metallurgy (Metally) (2021)

  6. No Access

    Article

    Study of Metal Coatings Deposited by Rotating Wire Tool

    Environmentally friendly wear-resistant coatings deposited by a developed rotating flexible tool (metal wire brush) form a layer without visible boundaries inside the coating with a thickness of 3–7 μm. Durome...

    S. I. Platov, R. R. Dema, O. R. Latypov, L. S. Belevskii… in Steel in Translation (2020)