21 Result(s)

Article

Lightweight polyaniline-cobalt coated fly ash cenosphere composite film for electromagnetic interference shielding

Thermal power plant’s solid environmental waste fly ash cenosphere (FAC) is cobalt coated chemically and functionalized by in situ synthesis of polyaniline (PANI) under nitrogen atmosphere at −30 ± 2 °C and chara...

Pritom J. Bora, K. J. Vinoy, Praveen C. Ramamurthy, Kishore… in Electronic Materials Letters (2016)

Article

Post-failure Analysis and Fractography of In-plane Tension-Tested Tufted Carbon Fabric-Reinforced Epoxy Composite Laminates

Tufted and plain unidirectional carbon fabric-reinforced epoxy composite laminates were fabricated by vacuum-enhanced resin infusion technology and subjected to in-plane tensile tests with a view to study the ...

Suresh Kumar Masa, Ambresha Basappa Mallya… in Journal of Materials Engineering and Perfo… (2015)

Article

Influence of Surface Texture and Roughness of Softer and Harder Counter Materials on Friction During Sliding

Surface texture influences friction during sliding contact conditions. In the present investigation, the effect of surface texture and roughness of softer and harder counter materials on friction during slidin...

Pradeep L. Menezes, Kishore… in Journal of Materials Engineering and Perfo… (2015)

Article

Response of Materials During Sliding on Various Surface Textures

In the present investigation, soft materials, such as Al-4Mg alloy, high-purity Al and pure Mg pins were slid against hard steel plates of various surface textures to study the response of materials during sli...

Pradeep L. Menezes, Kishore… in Journal of Materials Engineering and Perfo… (2011)

Article

Effects of microballoons’ size and content in epoxy on compressive strength and modulus

Five slabs containing volume of microballoons ranging from 33.4 to 51.5% and all belonging to a size range of 65–100 μm were made. In order to study the effect of size range, another slab, but belonging to a b...

Kishore, Ravi Shankar, S. Sankaran in Journal of Materials Science (2006)

Article

Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites

Particulate reinforcements for polymers are selected with dual objective of improving composite properties and save on the total cost of the system. In the present study fly ash, an industrial waste with good ...

S. M. Kulkarni, Kishore in Journal of Materials Science (2002)

Article

Compressive fracture features of syntactic foams-microscopic examination

Syntactic foams made by mechanical mixing of polymeric binder and hollow spherical particles are used as core materials in sandwich structured materials. Low density of such materials makes them suitable for w...

N. Gupta, E. Woldesenbet, Kishore in Journal of Materials Science (2002)

Article

Studies on compressive failure features in syntactic foam material

Syntactic foam made by mechanical mixing of glass hollow spheres in epoxy resin matrix is characterized for compressive properties in the present study. Volume fraction of hollow spheres in the syntactic foam ...

N. Gupta, Kishore, E. Woldesenbet, S. Sankaran in Journal of Materials Science (2001)

Article

Static and impact behaviour of thermoplastic modified glass fabric/epoxy composites

M. Matheswaran, K. Padmanabhan, Kishore in Journal of Materials Science Letters (1995)

Article

On the elastic-plastic behaviour of woven fabric kevlar/epoxy composites

K. Padmanabhan, Kishore in International Journal of Fracture (1994)

Article

Fibre-matrix interfacial failure sequences in translaminar flexure of glass-epoxy composites

A detailed fractographic analysis is reported for the fibre-matrix interfacial failure sequences in the translaminar flexure testing of glass-epoxy composites of two different resin formulations. The influence...

K. Padmanabhan, Kishore in Journal of Materials Science (1994)

Article

Development of a new wear index in slurry erosion tests on steels

T. Chandrasekaran, Kishore in Journal of Materials Science Letters (1993)

Article

Flexural studies on asymmetric hybrid Kevlar fabric/epoxy composites

For composites reinforced with Kevlar fabrics, the method of asymmetric hybridization is employed for the improvement of flexural properties such as maximum fibre yield stress and modulus of elasticity in bend...

K. Padmanabhan, Kishore in Journal of Materials Science (1992)

Article

Analysis of deformation behaviour and fracture features in glass-epoxy composites toughened by rubber and carbon additions

S. Kaushal, Kishore in Journal of Materials Science Letters (1992)

Article

Influence of alumina particle additions on the mechanical properties and fracture features of glass-epoxy composites

V. Balakrishna, Kishore, D. Sarath Chandra in Journal of Materials Science Letters (1992)

Article

Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface

The mechanical behaviour of glass fibre-reinforced epoxy composites with introduced layers of materials and with fibre coating is studied. The role of aerosil powder as a filler material is investigated, and t...

S. Kaushal, K. Tankala, R. M. V. G. K. Rao, Kishore in Journal of Materials Science (1991)

Article

Fracture surface characterization of epoxy-based GFRP laminates

Fractographic investigation has been carried out on glass fabric-epoxy composite laminates using scanning electron microscopy. Focusing on the flexural failure of lap shear specimens, some unique fracture feat...

S. Samajdar, Kishore in Journal of Materials Science (1991)

Article

Effect of post-curing on the mechanical properties and fracture features of some glass-phenolic composites

D. Sarath Chandra, R. M. V. G. K. Rao, Kishore in Journal of Materials Science Letters (1991)

Article

Microstructural and kinetic aspects of devitrification of Fe₄₀Ni₄₀B₂₀ metallic glass

The crystallization characteristics of Vitrovac 0040 commercial glass with a composition of Fe₄₀Ni₄₀B₂₀ have been investigated in detail using differential scanning calorimetry, X-ray diffraction, optical and ele...

V. S. Raja, Kishore, S. Ranganathan in Journal of Materials Science (1990)

Article

The effect of carbon coating on the flexural properties of Kevlar/epoxy composites

K. Padmanabhan, Kishore in Journal of Materials Science Letters (1990)