![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Seeded growth of single-crystal black phosphorus nanoribbons
Two-dimensional materials have emerged as an important research frontier for overcoming the challenges in nanoelectronics and for exploring new physics. Among them, black phosphorus, with a combination of a tu...
-
Article
Conversion of chirality to twisting via sequential one-dimensional and two-dimensional growth of graphene spirals
The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport p...
-
Article
Open AccessA new route to fabricate flexible, breathable composites with advanced thermal management capability for wearable electronics
Wearable electronics with miniaturization and high-power density call for devices with advanced thermal management capabilities, outstanding flexibility, and excellent permeability. However, it is difficult to...
-
Article
High-Performance PbI2 Photodetector Constructed by Electrohydrodynamic Jet-Printing Method
The electrohydrodynamic (EHD) printing method shows advantages of solution-processed fabrication, low cost, and large area deposition in the construction of semiconductor films. Here, a layer and wide bandgap ...
-
Article
Effects of Sn-Ag-x leveling layers on the microstructure and shear behavior of Sn-58Bi solder joint under thermal cycling
Four Sn-Ag-x (Sn-3.0Ag-0.5Cu, Sn-0.3Ag-0.7Cu, Sn-0.3Ag-0.7Cu-0.5Bi-0.05Ni, and Sn-3.0Ag-3.0Bi-3.0In) leveling layers were coated on Cu substrate to improve the reliability of Sn-58Bi (SnBi) solder joints under...
-
Article
Influence of Ba on Co-Al-Ba composite oxide catalysts in auto-thermal reforming of acetic acid for hydrogen production
Auto-thermal reforming (ATR) of acetic acid (HAc) is one of the potential approaches to produce hydrogen. However, the current catalysts suffered from deactivation raised from sintering and carbon deposition. ...
-
Article
Interface behavior and performance of Sn–Ag–Cu lead-free solder bearing Tb
To further improve the performance of the Sn–3.5Ag–0.5Cu solder, trace amount of rare earth Tb was added. The wettability, shear strength and interface compounds (IMCs) were investigated in this work. The find...
-
Article
Preparation and microwave absorption characteristics of MoS2/Nd2O2CO3 composites
The neodymium oxide carbonate (Nd2O2CO3) was prepared from neodymium hydroxide (Nd(OH)3) by hydrothermal and 550 °C heat treatment. Then, the MoS2/Nd2O2CO3 composites with different contents of Nd2O2CO3 were synt...
-
Article
Nanocomposite synthesis of MoS2/nano-CeO2 for high-performance electromagnetic absorption
The MoS2/CeO2 composites with different contents and grain sizes CeO2 were synthesized to research the electromagnetic (EM) absorbing mechanism and properties. The as-prepared MoS2/nano-CeO2 exhibits excellent mi...
-
Article
Large-scale growth of few-layer two-dimensional black phosphorus
Two-dimensional materials provide opportunities for develo** semiconductor applications at atomistic thickness to break the limits of silicon technology. Black phosphorus (BP), as a layered semiconductor wit...
-
Article
Effect of interfacial area on the dielectric properties of ceramic-polymer nanocomposites using coupling agent blended matrix
In this work, a frequently used coupling agent, 3-Aminopropyltriethoxysilane, was directly added and blended into polymer matrix to fabricate BaTiO3-P(VDF-CTFE) nanocomposites using different size of BaTiO3 nanop...
-
Article
Enhanced thermal conductivity in TiC/diamond or Cr3C2/diamond particles modified Bi-In-Sn compounds
Improving thermal conductivity is a critical issue in chip integration. In this work, the thermal conductivity of Bi-In-Sn (BIS) compounds was enhanced via the introduction of TiC/diamond or Cr3C2/diamond particl...
-
Article
Novel core–shell-structured ironbark-like TiO2 as fillers for excellent discharged energy density of nanocomposites
The perpendicular orientation of nanowires to electric fields would greatly improve the breakdown strengths (Eb) of polymer-based nanocomposites; however, the relatively small polarization at small filler fractio...
-
Article
New negative temperature coefficient ceramics in ACu3Ti4O12 (A = Sr, La2/3, Ca, Y2/3) system
In this work, new ACu3Ti4O12 (A = Sr, La2/3, Ca, Y2/3) negative temperature coefficient (NTC) ceramics have been successfully fabricated by traditional solid-state reaction method. XRD analysis shows that the ACu
-
Article
Microstructure and strengthening mechanisms of CuCrZr alloy by two-step thermomechanical treatment
The high strength obtained in Cu–Cr alloys is mainly attributed to the precipitation strengthening, dislocation strengthening, and grain-boundary strengthening. The precipitate size, dislocation density, and g...
-
Article
Enhanced electricity generation in photoelectrochemical cell using Sn-doped BiOCl photoanode
Photoanode material, due to its wide applications in photoelectrochemistry, has attracted much attention. In this work, tin-doped BiOCl (BiOCl-Sn) is prepared through a simple and effective method. A photoelec...
-
Article
Design of a Tunable Polarization-Insensitive Absorber for L and S Bands Using Active Frequency-Selective Surface
A tunable polarization-insensitive absorber based on an active frequency-selective surface is proposed for electromagnetic (EM) wave absorption in the L and S bands. The frequency-selective surface consists of...
-
Article
Enhanced photocatalytic reduction activity of BiOCl nanosheets loaded on β-Bi2O3
BiOCl nanosheets were loaded on the surface of β-Bi2O3 and its photocatalytic reduction activity was investigated. The composite displays excellent photocatalytic reduction activity. The NH3 yield rate of β-Bi2O3
-
Article
Electrochromic polyaniline/aramid nanofiber composites with enhanced cycling stability and film forming property
Polyaniline (PANI)/hydrothermal treatment aramid nanofibers (HANFs) nanocomposites were synthetized by in situ chemical oxidation polymerization of aniline monomers onto HANFs. The morphologies as well as the ...
-
Article
The Sol–gel method synthesis of Bi4NbO8Cl with (001) facets exposed for high visible-light activity
Layered perovskite oxyhalide Bi4NbO8Cl with exposed (001) lattice plane has been successfully synthesized by Sol–gel method. The obtained products were characterized by X-ray diffraction, diffuse-reflection spect...