Skip to main content

previous disabled Page of 3
and
  1. No Access

    Article

    High-Performance PbI2 Photodetector Constructed by Electrohydrodynamic Jet-Printing Method

    The electrohydrodynamic (EHD) printing method shows advantages of solution-processed fabrication, low cost, and large area deposition in the construction of semiconductor films. Here, a layer and wide bandgap ...

    Tianzhu Gong, Fei Liu, Huiling Chen, Lanxin Li in Journal of Electronic Materials (2023)

  2. No Access

    Article

    Effects of Sn-Ag-x leveling layers on the microstructure and shear behavior of Sn-58Bi solder joint under thermal cycling

    Four Sn-Ag-x (Sn-3.0Ag-0.5Cu, Sn-0.3Ag-0.7Cu, Sn-0.3Ag-0.7Cu-0.5Bi-0.05Ni, and Sn-3.0Ag-3.0Bi-3.0In) leveling layers were coated on Cu substrate to improve the reliability of Sn-58Bi (SnBi) solder joints under...

    Huifeng Chen, Yang Liu, Shuang Zhang in Journal of Materials Science: Materials in… (2023)

  3. No Access

    Article

    Interface behavior and performance of Sn–Ag–Cu lead-free solder bearing Tb

    To further improve the performance of the Sn–3.5Ag–0.5Cu solder, trace amount of rare earth Tb was added. The wettability, shear strength and interface compounds (IMCs) were investigated in this work. The find...

    Zeyu Yuan, Yujie He, Ruize Wu, Ming Xu in Journal of Materials Science: Materials in… (2022)

  4. No Access

    Article

    Preparation and microwave absorption characteristics of MoS2/Nd2O2CO3 composites

    The neodymium oxide carbonate (Nd2O2CO3) was prepared from neodymium hydroxide (Nd(OH)3) by hydrothermal and 550 °C heat treatment. Then, the MoS2/Nd2O2CO3 composites with different contents of Nd2O2CO3 were synt...

    Hui Chen, Jun Shen, Yanhua Zhang in Journal of Materials Science: Materials in Electronics (2022)

  5. No Access

    Article

    Nanocomposite synthesis of MoS2/nano-CeO2 for high-performance electromagnetic absorption

    The MoS2/CeO2 composites with different contents and grain sizes CeO2 were synthesized to research the electromagnetic (EM) absorbing mechanism and properties. The as-prepared MoS2/nano-CeO2 exhibits excellent mi...

    Hui Chen, Jun Shen, Yanhua Zhang in Journal of Materials Science: Materials in Electronics (2021)

  6. No Access

    Article

    Effect of interfacial area on the dielectric properties of ceramic-polymer nanocomposites using coupling agent blended matrix

    In this work, a frequently used coupling agent, 3-Aminopropyltriethoxysilane, was directly added and blended into polymer matrix to fabricate BaTiO3-P(VDF-CTFE) nanocomposites using different size of BaTiO3 nanop...

    Jiachen Liu, Yusheng Wang, Huize Tang in Journal of Materials Science: Materials in… (2021)

  7. No Access

    Article

    Enhanced thermal conductivity in TiC/diamond or Cr3C2/diamond particles modified Bi-In-Sn compounds

    Improving thermal conductivity is a critical issue in chip integration. In this work, the thermal conductivity of Bi-In-Sn (BIS) compounds was enhanced via the introduction of TiC/diamond or Cr3C2/diamond particl...

    Chengzong Zeng, Jun Shen, Mengqi Gong in Journal of Materials Science: Materials in… (2021)

  8. No Access

    Article

    Novel core–shell-structured ironbark-like TiO2 as fillers for excellent discharged energy density of nanocomposites

    The perpendicular orientation of nanowires to electric fields would greatly improve the breakdown strengths (Eb) of polymer-based nanocomposites; however, the relatively small polarization at small filler fractio...

    ZhiJie Wu, YaFei Hou, Hui Chen, Peng Du in Journal of Materials Science: Materials in… (2021)

  9. No Access

    Article

    New negative temperature coefficient ceramics in ACu3Ti4O12 (A = Sr, La2/3, Ca, Y2/3) system

    In this work, new ACu3Ti4O12 (A = Sr, La2/3, Ca, Y2/3) negative temperature coefficient (NTC) ceramics have been successfully fabricated by traditional solid-state reaction method. XRD analysis shows that the ACu

    Yaxin Wei, Bo Zhang, Zhilong Fu, Huimin Chen in Journal of Materials Science: Materials in… (2021)

  10. No Access

    Article

    Microstructure and strengthening mechanisms of CuCrZr alloy by two-step thermomechanical treatment

    The high strength obtained in Cu–Cr alloys is mainly attributed to the precipitation strengthening, dislocation strengthening, and grain-boundary strengthening. The precipitate size, dislocation density, and g...

    Shiha Huang, Wei Huang, Weibin **e in Journal of Materials Science: Materials in… (2020)

  11. No Access

    Article

    Enhanced electricity generation in photoelectrochemical cell using Sn-doped BiOCl photoanode

    Photoanode material, due to its wide applications in photoelectrochemistry, has attracted much attention. In this work, tin-doped BiOCl (BiOCl-Sn) is prepared through a simple and effective method. A photoelec...

    Jun Shang, Bing Zhao, Yanjun Gao, Huige Chen in Journal of Materials Science: Materials in… (2020)

  12. No Access

    Article

    Design of a Tunable Polarization-Insensitive Absorber for L and S Bands Using Active Frequency-Selective Surface

    A tunable polarization-insensitive absorber based on an active frequency-selective surface is proposed for electromagnetic (EM) wave absorption in the L and S bands. The frequency-selective surface consists of...

    **aoqing Yang, Huijie Chen, Jiefang Luo, Piqiang Su in Journal of Electronic Materials (2020)

  13. No Access

    Article

    Enhanced photocatalytic reduction activity of BiOCl nanosheets loaded on β-Bi2O3

    BiOCl nanosheets were loaded on the surface of β-Bi2O3 and its photocatalytic reduction activity was investigated. The composite displays excellent photocatalytic reduction activity. The NH3 yield rate of β-Bi2O3

    Jun Shang, Huige Chen, Bing Zhao, Fei Zhou in Journal of Materials Science: Materials in… (2019)

  14. No Access

    Article

    Electrochromic polyaniline/aramid nanofiber composites with enhanced cycling stability and film forming property

    Polyaniline (PANI)/hydrothermal treatment aramid nanofibers (HANFs) nanocomposites were synthetized by in situ chemical oxidation polymerization of aniline monomers onto HANFs. The morphologies as well as the ...

    Yinghui Zhao, Sihang Zhang, Fei Hu in Journal of Materials Science: Materials in… (2019)

  15. No Access

    Article

    The Sol–gel method synthesis of Bi4NbO8Cl with (001) facets exposed for high visible-light activity

    Layered perovskite oxyhalide Bi4NbO8Cl with exposed (001) lattice plane has been successfully synthesized by Sol–gel method. The obtained products were characterized by X-ray diffraction, diffuse-reflection spect...

    Guangda Ni, Yanqing Li, Huimin Chen in Journal of Materials Science: Materials in… (2019)

  16. No Access

    Article

    Synthesis and enhanced visible light-induced photocatalytic activity of a hierarchical porous biomorphic N/Zn–TiO2@NH2-MIL-125 photocatalyst

    Heterojunction is considered as very promising material for various applications in photocatalysis. Herein, an efficient heterojunction photocatalyst N/Zn–TiO2@NH2-MIL-125 was successfully synthesized for photo-d...

    Yingying Du, Lei Zhao, Hui Chen in Journal of Materials Science: Materials in… (2018)

  17. No Access

    Article

    A novel WO2@FeWO4 composite derived from polyoxometalates@Fe–metal–organic frameworks and its electrochemical properties

    In this paper, we synthesize a needle-like polyoxometalates@Fe-based metal–organic framework (POM@Fe–MOFs) composites, in which the Keggin-type W-based POM with negative charges exist as secondary building uni...

    Wanqiu Zhang, Xuan He, Lei Zhao, Weixin Li in Journal of Materials Science: Materials in… (2018)

  18. No Access

    Article

    Effects of Dy substitution for Sn on the solderability and mechanical property of the standard near eutectic Sn–Ag–Cu alloy

    In this study, the solderability of Sn–3.5Ag–0.5Cu–xDy solders were investigated and the shear strength properties of joints with Cu substrate were investigated. The results indicated that a small amount Dy ad...

    HuiMing Chen, **fa Liao, Shanjiang Wu in Journal of Materials Science: Materials in… (2018)

  19. No Access

    Article

    CdSe QDs sensitized MIL-125/TiO2@SiO2 biogenic hierarchical composites with enhanced photocatalytic properties via two-level heterostructure

    With increasing concern about the problems of environmental pollution and energy, the visible light photocatalytic for dye degradation is receiving considerable attention. CdSe quantum dot (CdSe QDs) sensitize...

    Zhaohui Huang, Hui Chen, Lei Zhao, Xuan He in Journal of Materials Science: Materials in… (2018)

  20. No Access

    Article

    Enhanced Electrochemical Activity and Chromium Tolerance of the Nucleation-Agent-Free La2Ni0.9Fe0.1O4+δ Cathode by Gd0.1Ce0.9O1.95 Incorporation

    For the sake of improving the electrochemical activity and chromium tolerance of the K2NiF4-type oxide, La2NiO4+δ (LNO), with nonnucleation agents like Mn and Sr elements, the electrochemical performance and degr...

    Yihan Ling, Huixin **e, Zi**g Liu, **aoni Du, Hui Chen in Electronic Materials Letters (2018)

previous disabled Page of 3