Skip to main content

previous disabled Page of 28
and
  1. No Access

    Article

    An investigation on jets

    The authors present a statistical method for the determin ation of the energy of the primary of a nucleon-nucleon collision in which secondary particles are produced. Such a method, which represents an appreci...

    C. Castagnoli, G. Cortini, C. Franzinetti, A. Manfredini in Il Nuovo Cimento (1943-1954) (1953)

  2. No Access

    Article

    Sputtering and roughness of the (0 01), (01 1) and (111) copper single-crystal planes

    D. Moreno, D. Eliezer in Journal of Materials Science Letters (1994)

  3. No Access

    Article

    The stability of LaNi5 in a Cu matrix

    The reaction of LaNi5 with Cu powder during sintering at high temperature was examined in order to obtain better conductivity and ductility. Pressurized and forged copper-LaNi5 pellets were investigated by optica...

    D. Moreno, C. A. F. Manwaring, I. R. Harris in Journal of Materials Science (1996)

  4. No Access

    Article

    On the blister formation in copper alloys due to the helium ion implantation

    A new approach to the blister-formation phenomenon is discussed by means of the mathematical solution on a uniformly loaded circular plate with clamped edges (circular diaphragm). In the present investigation,...

    D. Moreno, D. Eliezer in Metallurgical and Materials Transactions A (1997)

  5. No Access

    Article

    On the blister formation in copper alloys due to the helium ion implantation

    A new approach to the blister-formation phenomenon is discussed by means of the mathematical solution on a uniformly loaded circular plate with clamped edges (circular diaphragm). In the present investigation,...

    D. Moreno, D. Eliezer in Metallurgical and Materials Transactions A (1997)

  6. No Access

    Article

    Fracture characterization of welded copper-beryllium alloy

    S. Zalkind, D. Moreno in Journal of Materials Science Letters (1999)

  7. No Access

    Article

    Superficial hardening in the plane grinding of AISI 1045 steel

    This work outlines the influence of cutting parameters on the superficial hardening of AISI 1045 steel during a grinding process. The parameters are infeed (d), workpiece velocity (v), and cross feed (s). Micr...

    O. Zurita, A. Acosta, D. Moreno in Journal of Materials Engineering and Performance (2003)

  8. No Access

    Article

    Multi-scale spatial heterogeneity, habitat structure, and the effect of marine reserves on Western Mediterranean rocky reef fish assemblages

    A hierarchical sampling design, spanning five orders of magnitude (from 10s of metres to 100s of kilometres) was created in order to quantify the multi-scale spatial variability of visually censused rocky reef...

    J. A. García-Charton, Á. Pérez-Ruzafa, P. Sánchez-Jerez in Marine Biology (2004)

  9. No Access

    Article

    Beneficial effects of combining a type II ATP competitive inhibitor with an allosteric competitive inhibitor of BCR-ABL for the treatment of imatinib-sensitive and imatinib-resistant CML

    E Weisberg, X Deng, H G Choi, R Barrett, S Adamia, A Ray, D Moreno, A L Kung in Leukemia (2010)

  10. Article

    Open Access

    Performance of the ATLAS detector using first collision data

    More than half a million minimum-bias events of LHC collision data were collected by the ATLAS experiment in December 2009 at centre-of-mass energies of 0.9 TeV and 2.36 TeV. This paper reports on studies of t...

    G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim in Journal of High Energy Physics (2010)

  11. Article

    Open Access

    Readiness of the ATLAS Tile Calorimeter for LHC collisions

    The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully op...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  12. Article

    Open Access

    The ATLAS Simulation Infrastructure

    The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the ge...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  13. Article

    Open Access

    The ATLAS Inner Detector commissioning and calibration

    The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  14. Article

    Open Access

    Commissioning of the ATLAS Muon Spectrometer with cosmic rays

    The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performan...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  15. Article

    Open Access

    Drift Time Measurement in the ATLAS Liquid Argon Electromagnetic Calorimeter using Cosmic Muons

    The ionization signals in the liquid argon of the ATLAS electromagnetic calorimeter are studied in detail using cosmic muons. In particular, the drift time of the ionization electrons is measured and used to a...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  16. Article

    Open Access

    Readiness of the ATLAS liquid argon calorimeter for LHC collisions

    The ATLAS liquid argon calorimeter has been operating continuously since August 2006. At this time, only part of the calorimeter was readout, but since the beginning of 2008, all calorimeter cells have been co...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2010)

  17. Article

    Open Access

    Measurement of the Wℓν and Z/γ *ℓℓ production cross sections in proton-proton collisions at \( \sqrt {s} = 7\;{\text{TeV}} \) with the ATLAS detector

    First measurements of the W →ν and Z/γ * ℓℓ (ℓ = e, μ) production cross sections in proton-proton collisions at

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in Journal of High Energy Physics (2010)

  18. Article

    Open Access

    Measurement of inclusive jet and dijet cross sections in proton-proton collisions at 7 TeV centre-of-mass energy with the ATLAS detector

    Jet cross sections have been measured for the first time in proton-proton collisions at a centre-of-mass energy of 7 TeV using the ATLAS detector. The measurement uses an integrated luminosity of 17 nb−1 recorded...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2011)

  19. No Access

    Article

    Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \(\sqrt{s}=7\)  TeV

    A measurement of the production cross-section for top quark pairs ( \(t\bar{t}\) ) in pp collisions at ...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2011)

  20. Article

    Open Access

    Studies of the performance of the ATLAS detector using cosmic-ray muons

    Muons from cosmic-ray interactions in the atmosphere provide a high-statistics source of particles that can be used to study the performance and calibration of the ATLAS detector. Cosmic-ray muons can penetrat...

    G. Aad, B. Abbott, J. Abdallah, A. A. Abdelalim in The European Physical Journal C (2011)

previous disabled Page of 28