![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
328 Result(s)
-
Article
Correction: Thermal Model Improvement in Phonon Detection Channels Using a Scintillating Crystal
-
Article
Opposite Bauschinger Effects on Wear of High-Entropy Alloy AlCoCrFeNix (x = 0 to 2) Under Sliding Wear and Machining Conditions
Bauschinger effect on wear of high-entropy alloy (HEA), AlCoCrFeNix (x = 0 to 2), was studied with the aim of verifying a hypothesis: Bauschinger effect affects sliding wear and machining wear oppositely. Wear te...
-
Article
Simulation Study of Magnetic Microcalorimeters for Rare Event Search Experiments
We present advancements in a finite element method for computing the physical properties of magnetic microcalorimeters (MMCs). Utilizing the COMSOL package, we conducted 3D simulations of a meander-shaped Nb c...
-
Article
Thermal Model Improvement in Phonon Detection Channels Using a Scintillating Crystal
We present the development of a heat flow model utilizing a scintillating crystal for heat and light detection. By analyzing the measured light signals from ...
-
Article
Lethality Evaluation of Japanese Tanegashima and Korean Seungja-Chongtong via Projectile Penetration and Mass Drop Experiments
The Japanese invasion of the Korean peninsula lasted from 1592 to 1598, where Japan had the upper hand in infantry warfare based on superior firepower. The representative portable personal firepower weapons we...
-
Chapter and Conference Paper
Monotonic and Cyclic Deformation Behavior of a Silafont®-36 Cast Aluminum Alloy in an Overaged Condition
The aim of this study is to explore and understand the deformation mechanism in an overaged Al-Si high-pressure die cast alloy. Uniaxial tensile and strain-controlled low-cycle fatigue properties were correlat...
-
Article
Open AccessAn MMC-Based Temperature Control System for a Long-Term Data Collection
We developed a two-stage temperature control system for a long-term stable measurement of AMoRE neutrinoless double beta decay experiment using a dilution refrigerator. The first-stage control was made with a ...
-
Article
Effects of layer modulus on the phase evolutions and magnetic properties of [MgO/FePt]n multilayer thin films
Multilayer structural system is expected to reduce demagnetization energy and obtain outstanding magnetic anisotropy. The effects of layer modulus (n) on the phase evolutions and magnetic properties of [MgO/FePt]
-
Article
Controlled localization of magnetic nanoparticle mechanical activation in suspension exposed to alternating magnetic field using gradient magnetic field
In the past decade, nano-magnetomechanical actuation of biochemical systems for control of their properties on molecular level by means of magnetic nanoparticles in non-heating magnetic fields with frequency b...
-
Article
Microstructure, mechanical properties, corrosion and wear behavior of high-entropy alloy AlCoCrFeNix ( \(x > 0\) the) and medium-entropy alloy ( \(x = 0\) )
As one of the early studied high-entropy alloys, AlCoCrFeNi has drawn considerable attention due to its attractive mechanical properties. Efforts were made to improve this material by alloying with additional ...
-
Article
Investigation of Structural, Morphological and Elastic Properties of Ni-Zn Ferrite Grown with an Oxalate Precursor
We report structural, morphological and elastic properties of NiXZn1-XFe2O4 (x = 0.28, 0.30, 0.32, 0.34, 0.36, 0.38, 0.40) ferrimagnetic oxides prepared using oxalate chemistry. The Rietveld refinement of the X-r...
-
Article
Comparisons of magnetic behaviors between pure MgB2 and 33 wt% (Fe, Ti) particle-doped MgB2 superconductor
Magnetic behaviors of pure \(\hbox {MgB}_2\) MgB 2 ...
-
Article
Microstructure and Mechanical Properties of WC-Co-Ti(C0.5, N0.5)-Mo Cemented Carbides
This paper reports the synthesis and properties of WC-Co-Ti(C0.5, N0.5)-Mo cemented carbides with various compositions by employing powder metallurgy processing technology. The effect of adding Mo to cemented car...
-
Article
The Yttrium-Incorporated Aluminizing of Mg-3%Al Alloy for Improved Tribological and Corrosion Properties
Modification of the surface is an effective approach for increasing the corrosion resistance of Mg alloys without influencing their bulk properties. Among numerous surface modification techniques, aluminizing ...
-
Article
Experimental Determination of the Compressibility Factor of Natural Gas: Methods and Results
The article discusses the applicability of the equations of state for the gas phase of natural gas at temperatures below 250 K. To tackle this problem, highly accurate experimentally obtained values of the com...
-
Article
Effects of Mo and B Additives on Hardness and the Resistance of Cu–Ni Alloy to Wear, Corrosion and Corrosive Wear
Due to its corrosion resistance, modifiable mechanical properties, and electrical conductivity, etc., CuNi alloy has found a wide variety of industrial applications, especially in the marine environment. It is...
-
Article
Ga(Nb,Ta)SiBEA zeolites prepared by two-step postsynthesis method: acid–base characteristics and catalytic performance in the dehydrogenation of propane to propylene with CO2
Ga(Ta,Nb)SiBEA zeolites with Ta(V), Nb(V) and Ga(III)-single sites were prepared by two-step post-synthesis preparation procedure as evidenced by X-ray Diffraction, Fourier Transform Infrared Spectroscopy (FT–...
-
Article
Electrospun flexible 1D-MnO2 nanofibres: a versatile material for energy storage application
We describe facile electrospinning route for fabricating 1D-MnO2 nanofibres based high-performance flexible electrode for energy storage application. The physico-chemical and morphological analyses showcase the f...
-
Article
Rolling circle amplification with fluorescently labeled dUTP—balancing the yield and degree of labeling
Detection methods based on rolling circle amplification (RCA) have been applied to a large number of targets in molecular biology. The key feature of RCA-based methods as well as other nucleic acid amplificati...
-
Article
Equivalent Spectral Method to Estimate the Fatigue Life of Composite Laminates Under Random Vibration Loadings
The power spectral density (PSD) of an equivalent stress is proposed to analyze the fatigue life of composite laminates under random vibration loadings using the Tsai–Hill criterion. The vibration fatigue life...