Skip to main content

37 Result(s)

within Baohong ** Remove this filter Characterization and Evaluation of Materials Remove this filter

previous disabled Page of 2
and

  1. No Access

    Article

    Effects of Trace La on the Aging Properties of the Cu-Ti-Zr Alloys

    Cu-2Ti-0.3Zr and Cu-2Ti-0.3Zr-0.2La alloys were prepared by vacuum melting, and their mechanical properties and conductivity were measured after aging treatment. Both alloys were aged at 450 °C for 30 min to o...

    Nengneng Wang, Meng Zhou, Baohong Tian… in Journal of Materials Engineering and Perfo… (2024)

  2. No Access

    Article

    Trends in confinement-induced cell migration and multi-omics analysis

    Cell migration is an essential manner of different cell lines that are involved in embryological development, immune responses, tumorigenesis, and metastasis in vivo. Physical confinement derived from crowded ...

    Jiayin Lu, Xue-Zhu Chen, Yixin Liu, Yan-Jun Liu… in Analytical and Bioanalytical Chemistry (2024)

  3. No Access

    Article

    Simultaneously Enhanced Thermal and Mechanical Properties of ZK60 Alloy Reinforced by Oriented Graphene Nanoplatelets

    The lamellar and orientational characteristics of graphene nanoplatelets (GNPs) are crucial for reinforcing metal matrix composites, particularly in terms of their thermal properties. Two kinds of GNPs with pl...

    Baohong Zhu, **an Du, Fan**g Meng… in Acta Metallurgica Sinica (English Letters) (2023)

  4. No Access

    Article

    Ce Effects on Dynamic Recrystallization of Cu-Fe-Ti-Mg Alloys Due to Hot Compression

    This study researched how Ce addition affects the microstructure and mechanical behavior of Cu-Fe-Ti-Mg alloys during hot compression. A thermal deformation simulation machine was used to study the hot compres...

    Qingbao Cao, Meng Zhou, Yi Zhang, Haoyan Hu… in Journal of Materials Engineering and Perfo… (2023)

  5. No Access

    Article

    A review on properties and antibacterial applications of polymer-functionalized carbon dots

    With the development of carbon-based nanomaterials, carbon dots (CDs) have attracted tremendous attention due to their unique optical performance, excellent biocompatibility, small size, and easy modification....

    **aohong Chu, Mingqian Wang, Shaoze Shi, Baohong Sun… in Journal of Materials Science (2022)

  6. Article

    Dual-modality loop-mediated isothermal amplification for pretreatment-free detection of Septin9 methylated DNA in colorectal cancer

    Currently, the determination of DNA methylation is still a challenge due to the limited efficiency of enrichment, bisulfite modification, and detection. In this study, a dual-modality loop-mediated isothermal ...

    Qiuyuan Lin, Xueen Fang, Hui Chen, Wenhao Weng, Baohong Liu… in Microchimica Acta (2021)

    Download PDF (5048 KB) View Article

  7. No Access

    Article

    Wound healing acceleration by antibacterial biodegradable black phosphorus nanosheets loaded with cationic carbon dots

    Microorganism invasion is still a severe threat for wound healing, which usually induces severe complications and cannot be eradicated completely. Thus, a biodegradable nanomaterial for guarding against bacter...

    Pan Zhang, Baohong Sun, Fan Wu, Qicheng Zhang, **aohong Chu… in Journal of Materials Science (2021)

  8. No Access

    Article

    Effects of Trace Ce Addition on Hot Deformation Behavior of Cu-0.8 Mg Alloy

    Hot deformation tests of Cu-0.8 Mg and Cu-0.8 Mg-0.15 Ce alloys were carried out with a Gleeble-1500D thermal simulator in the temperature range of 500-850°C and the strain rate range of 0.001-10 s−1. Based on co...

    Guoqiang Sun, Yong Liu, Baohong Tian… in Journal of Materials Engineering and Perfo… (2020)

  9. No Access

    Article

    Mechanical and Electrical Properties and Phase Analysis of Aged Cu-Mg-Ce Alloy

    Aging behavior of the Cu-Mg-Ce alloy of various cold deformations with aging temperature ranging from 400 to 480 °C and aging time ranging from 10 to 480 min was investigated. Effects of the secondary phase on...

    Junchao An, Bingjie Wang, Yi Zhang… in Journal of Materials Engineering and Perfo… (2020)

  10. No Access

    Article

    A highly efficient UV-emitting Mg3Y2Ge3O12:Bi3+ crystal as a fluorescent irradiation source for use in heavy oil viscosity reduction

    In this work, we discover and report a type of Mg3Y2Ge3O12:Bi3+ crystal that can not only show a highly efficient ultraviolet (UV) luminescence but also be used for reducing the heavy oil viscosity. To fully char...

    Wendong Lv, Baohong Ding, Xuyang Feng… in Journal of Materials Science: Materials in… (2019)

  11. No Access

    Article

    Identification of pathogenic bacteria in human blood using IgG-modified Fe3O4 magnetic beads as a sorbent and MALDI-TOF MS for profiling

    A method is described for fast identification of bacteria by combining (a) the enrichment of bacterial cells by using magnetite (Fe3O4) magnetic beads modified with human IgG (IgG@Fe3O4) and (b) MALDI-TOF MS anal...

    Jia Yi, Qin Qin, Yan Wang, Rutan Zhang, Hongyan Bi, Shaoning Yu… in Microchimica Acta (2018)

  12. No Access

    Article

    Hot Deformation Behavior of the 20 vol.% TiC/Cu-Al2O3 Composites

    Hot deformation behavior of the 20 vol.% TiC/Cu-Al2O3 composite was studied using the Gleeble-1500D thermo-mechanical simulator with various strain rates at different deformation temperatures. The softening mecha...

    Yong Liu, Zhiqiang Yang, Baohong Tian… in Journal of Materials Engineering and Perfo… (2018)

  13. No Access

    Article

    ZnTe quantum dots as fluorescence sensors for the detection of iron ions

    Colloidal mercaptoacetic acid capped ZnTe quantum dots (QDs) are prepared to target iron ions as a fluorescence sensor. The results show that the obtained QDs present excellent selectivity for the detection of Fe

    **aowei **ng, Dongming Wang, Zhi Chen… in Journal of Materials Science: Materials in… (2018)

  14. No Access

    Article

    Constitutive Model for Hot Deformation of the Cu-Zr-Ce Alloy

    Hot compressive deformation behavior of the Cu-Zr-Ce alloy has been investigated according to the hot deformation tests in the 550-900 °C temperature range and 0.001-10 s−1 strain rate range. Based on the true st...

    Yi Zhang, Huili Sun, Alex A. Volinsky… in Journal of Materials Engineering and Perfo… (2018)

  15. No Access

    Article

    Aging Strengthening Mechanism of the Cu-1.0Zr Alloy

    The effects of different aging processes on electrical conductivity and microhardness of a Cu-1.0Zr alloy were investigated. Microstructure and precipitates of the aged alloy were analyzed by transmission elec...

    Ka Tian, Baohong Tian, Yi Zhang, Yong Liu… in Metallurgical and Materials Transactions A (2017)

  16. No Access

    Article

    The intensity properties of a Multi-Gaussian Schell-model pulse scattering from a sphere with semisoft boundaries

    The scattering of a Multi-Gaussian Schell-model pulse from a sphere with semisoft boundaries within the accuracy of the first-order Born approximation is investigated. The analytic expression for the average i...

    Hai**a Wang, ChaoLiang Ding, BaoHong Ma, Cunhua Zhao… in Optical and Quantum Electronics (2016)

  17. No Access

    Article

    Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy

    Microstructure of the Cu-Ni-Si-P alloy was investigated by transmission electron microscopy (TEM). The alloy had 551 MPa tensile strength, 226 HV hardness, and 36% IACS electrical conductivity after 80% cold r...

    Yi Zhang, Baohong Tian, Alex A. Volinsky… in Journal of Materials Engineering and Perfo… (2016)

  18. No Access

    Article

    Hot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy

    To study the workability and to optimize the hot deformation processing parameters of the Cu-Cr-Zr-Y alloy, the strain hardening effect and dynamic softening behavior of the Cu-Cr-Zr-Y alloy were investigated....

    Yi Zhang, Sun Huili, Alex A. Volinsky… in Journal of Materials Engineering and Perfo… (2016)

  19. No Access

    Article

    Hot Deformation Characteristics and Processing Maps of the Cu-Cr-Zr-Ag Alloy

    The hot deformation behavior of the Cu-Cr-Zr-Ag alloy has been investigated by hot compressive tests in the 650-950 °C temperature and 0.001-10 s−1 strain rate ranges using Gleeble-1500D thermo-mechanical simulat...

    Yi Zhang, Zhe Chai, Alex A. Volinsky… in Journal of Materials Engineering and Perfo… (2016)

  20. No Access

    Chapter and Conference Paper

    X-Ray Diffraction Study on Lattice Constant of Supersaturated Solid Solution for Al Based Binary Alloys and Selected Al-Zn-Mg-Cu Alloys

    The effects of Zn, Mg, Cu content on lattice constants of the supersaturated solid solution of Al-Zn, Al-Mg, Al-Cu based binary alloys and three selected 7B04, 7050, 7B85 alloys were investigated by using X-ra...

    Zhihui Li, Baiqing **ong, Yongan Zhang, **wu Li, Baohong Zhu… in ICAA13 Pittsburgh (2016)

previous disabled Page of 2