-
Article
3D Graphene Nanosheets Crosslinked Core–Shell FeS2@N, S Co-Doped Porous Carbon for Improved Lithium/Sodium Storage Performance
Transition metal sulfides (TMS) hold great promise as anode materials for Li+/Na+ storage. However, their practical application still faces several challenges, such as inadequate electrical conductivity, substant...
-
Article
Precise separation and efficient recovery of Pd(II) from high-level liquid waste by XAD-based adsorbents
Efficient separation of palladium (Pd(II)) from high-level liquid waste (HLLW) not only helps the safe disposal of nuclear waste, but also is a vital important supplement to Pd(II) resources. Herein, 16 kinds ...
-
Article
ZIF-8-functionalized polymer electrolyte with enhanced performance for high-temperature solid-state lithium metal batteries
Solid polymer electrolytes (SPEs) with high ionic conductivity are desirable for solid-state lithium metal batteries (SSLMBs) to achieve enhanced safety and energy density. Incorporating nanofillers into a pol...
-
Article
Enhanced cycling stability and rate performance of Co-doped and La2O3-coated LiNi0.9Mn0.1O2 toward power battery
Ultra-high nickel layered oxide cathode material with high energy density is the most promising material to improve the electrochemical performance of lithium-ion batteries (LIBs). However, the poor structural...
-
Article
Study of slope vibration site effects and energy analysis from CO2 static blasting
The novel CO2 static blasting method offered good prospects for application as it was more effective than mechanical rock breaking, less vibratory, less dusty and quieter than the traditional drill and blast meth...
-
Article
Correction to: Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3
-
Article
A numerical study based on GBM3D-DEM model: Multi-level force chain analysis in dynamic flexural tensile strength test
The force chain network is the key information of rock materials under loading, which is close to the micro-scale cracking and macroscopic mechanical behavior of rocks. In this paper, a novel 3D grain-based mo...
-
Article
Microstructure evolution of 7050 Al alloy fasteners during cold upsetting after equal channel angular pressing
The innovative combination of equal channel angular pressing (ECAP) and cold upsetting (CU) is significant for producing high-strength Al alloy fasteners with ultrafine grains. However, the relationship betwee...
-
Article
Publisher Correction: Resource utilization of flue gas calcium-based desulfurization ash: a comprehensive review
-
Article
Computer simulation of super-magnetoelastic behavior near critical region of magnetic materials based on phase-field method
Since the discovery of ferromagnetic morphotropic phase boundary (MPB) in 2010, the connotation and extension of MPB have been becoming more and more abundant. Over the last dozen years, much experimental work...
-
Article
Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3
Ni-rich cathode materials will be primarily used as next-generation high-specific energy cathode materials in lithium-ion batteries. However, residual Li formation and cracking considerably restrict the wide a...
-
Article
Resource utilization of flue gas calcium-based desulfurization ash: a comprehensive review
Calcium-based desulfurization ash (CDA) is mainly produced in dry and semi-dry flue gas desulfurization processes. The property of CDA is extremely unstable because its main component, calcium sulfite, makes i...
-
Article
Fabrication of Fe3C nanoparticles encapsulated in undoped graphite carbon and their catalysis for oxygen reduction
In recent years, nitrogenous metallic-complex catalysts for oxygen reduction reaction (ORR) have been extensively reported, but the exact role of Fe3C in the catalytic process is not clear due to the interference...
-
Article
Microwave-assisted rapid synthesis of ovalbumin-stabilized gold nanoclusters for picric acid determination
In this work, ovalbumin-stabilized gold nanoclusters (OVA-Au NCs) fluorescent nanoprobes were synthesized by microwave heating and applied to detect picric acid (PA). The nanoprobes emitted red fluorescence wi...
-
Article
Investigation on microstructures and properties of semi-solid Al80Mg5Li5Zn5Cu5 light-weight high-entropy alloy during isothermal heat treatment process
The Al80Mg5Li5Zn5Cu5 light-weight high-entropy alloy with globular microstructure was fabricated by isothermal heat treatment. The effects of isothermal temperatures and holding times on the semi-solid microstruc...
-
Article
Coupling vibration analysis of high-speed maglev train-viaduct systems with control loop failure
The risk of failure of the control loop can occur when a high-speed maglev train runs on viaduct. Meanwhile, the failure of the levitation magnets which balances the gravity of the maglev train could cause the...
-
Article
Efficient p-do** of P3HT for hole transporting materials in perovskite solar cells
-
Article
Design and optimization of exhaust gas aftertreatment system for a heavy-duty diesel engine
Diesel engines meeting the latest emission regulations must be equipped with exhaust gas aftertreatment system, including diesel oxidation catalysts (DOC), diesel particulate filters (DPF), and selective catal...
-
Article
Improvement of Mechanical Properties of a Medium-Mn TRIP Steel by Precursor Microstructure Control
An approach of optimizing the intercritical annealing path in a 0.2C-5Mn medium-Mn steel is presented by introducing precursor microstructure prior to normal austenite reverted transformation (ART) annealing. ...
-
Article
Recent advance in single-atom catalysis
Single-atom catalysts (SACs) have obtained a great deal of attention in many catalytic fields due to the high atom utilization efficiency and high catalytic activity. Recently, great achievements on SACs have ...