308 Result(s)
within
**lin Wu
Engineering
-
Article
Open AccessA review on the thermochemical reaction mechanisms for distiller pyrolysis process
Circular utilization of distillery byproducts is crucial, and pyrolysis has emerged as a viable technology for converting them into fuels and high-value chemicals. This review investigates the thermochemical r...
-
Article
Open AccessMicrogels for Cell Delivery in Tissue Engineering and Regenerative Medicine
This review provides a comprehensive summary associated with recent progress in the preparation and application of microgels.
- ...
-
Article
Achieving High-Strength Ductility Property in a Microstructure Homogenization Al-Zn-Mg-Cu Alloy by Electroshock Treatment
Dislocation tangle and coarse precipitate segregation cause incalculable damage to the strength and ductility of high-strength Al-Zn-Mg-Cu aluminum alloys. These drawbacks are inevitable for the alloys undergo...
-
Article
Effect of initial microstructure on microstructure evolution and mechanical properties of 0.12C martensitic steels during quenching and tempering
The microstructure evolution and mechanical properties of a Fe–0.12C–0.2Si–1.6Mn–0.3Cr–0.0025B (wt.%) steel with different initial microstructures, i.e., hot rolled (HR) and cold rolled–annealed (CRA), were st...
-
Article
Vulnerability Assessment of Cyber Physical Power System Based on Improved Cascading Failure Model
Aiming at the problem that the existing vulnerability assessment models ignore the state transformation of information nodes and delay effect of information network, an improved cascade failure model is propos...
-
Article
Source Depth Discrimination Based on Interference Spectrum in Deep Water with an Incomplete Channel
A method to distinguish the surface source and underwater source based on two-dimensional Fourier transform of interference pattern in deep-water environment with an incomplete sound channel is presented in th...
-
Article
Deformation Behavior and Mechanical Properties of AA7075 During Pre-hardened Aluminum Alloy Hot Forming Process
The long production cycle and high energy consumption limit the widespread application of the Hot Form Quench (HFQ®) process. Hence, a novel hot stam** process was proposed, known as pre-hardened aluminum alloy...
-
Article
Open AccessDilute Aqueous-Aprotic Electrolyte Towards Robust Zn-Ion Hybrid Supercapacitor with High Operation Voltage and Long Lifespan
A novel aqueous/aprotic electrolyte with low salt concentration (i.e., 0.5 m Zn(CF3SO3)2+1 m LiTFSI) demonstrated an expanded electrochemical window, which can simultaneously s...
-
Article
Novel modular quasi-zero stiffness vibration isolator with high linearity and integrated fluid dam**
Passive vibration isolation systems have been widely applied due to their low power consumption and high reliability. Nevertheless, the design of vibration isolators is usually limited by the narrow space of i...
-
Article
Human Thermoregulation and Injury Evaluation in Fire Environments: A Review
Fire environments impose severe effects on the human body through thermal radiation, smoke particles, and toxic gases. This review focuses on human injury mechanisms including human thermoregulation, heat stra...
-
Article
Dynamics of a Multi-pulse Excited Rotating Beam System
The periodic motion characteristic is crucial for the firing accuracy of the machine gun system. In this study, a demonstrated machine gun system is simplified as a rotating beam system to study its periodic m...
-
Article
A novel bio-inspired kangaroo leg structure for low-frequency vibration isolation
Inspired by the vibration mitigation effect of kangaroo’s legs, a novel bio-inspired kangaroo leg structure (BKLS) is proposed for low-frequency vibration isolation. The BKLS is composed of two main rods with ...
-
Chapter and Conference Paper
Comprehensive Design of Electrical Machines for Integrated Pulsed Discharge Systems
Based on the radial integrated pulsed discharge systems of prime motor and pulsed alternator, the match criteria between the specification parameters of motor and alternator are studied, and the electromagneti...
-
Article
Cold extrusion of a shaped charge liner preform with hyperboloid structure: simulation and experiment
In this work, a novel five-step cold extrusion forging technology was proposed for fabricating a shaped charge liner with hyperboloid structure feature, in which three steps forming to develop the macroscopic ...
-
Chapter and Conference Paper
Voltage Regulation Method for Active Distribution Networks Based on Rotary Voltage Regulator
Due to the dominant resistive component in distribution lines, the voltage upper and lower limits may occur in the same scenario. The voltage upper limit is caused by daytime photovoltaic power injection, whil...
-
Chapter and Conference Paper
Die Matching Performance of Ultra-Thin Titanium Sheet Driven by Polyurethane During Electromagnetic Forming
Electromagnetic forming of ultra-thin titanium plates requires high conductivity drive plates, resulting in low die matching rates. Rubber is expected to improve the die matching performance because of large d...
-
Chapter and Conference Paper
A Pre-synchronization Scheme for Grid Connection of Multiple Virtual Synchronous Generators Based on Current Limiting Link
For distributed renewable energy devices that can operate in both grid connected and island mode, and can switch between the two according to demand, The key issue in the switching process is the pre-synchroni...
-
Chapter and Conference Paper
Analysis on Grey Space Form and Simulation Evaluation in Landscape Design
In order to improve the landscape design effect, this paper combines intelligent grey space algorithm to improve the design algorithm, and uses Mean-shift algorithm to smooth the multi-focus image. Moreover, t...
-
Chapter and Conference Paper
Control the Migration of Self-propelling Particles in Thermal Turbulence via Reinforcement Learning Algorithm
Planning energy-efficient trajectories can significantly benefit unmanned aerial vehicles (UAVs) by increasing their endurance. Inspired by birds that exploit warm rising atmospheric currents, flying vehicles ...
-
Article
Effects of technology capability and marketing capability on manufacturing firms’ cross-channel integration capability: the moderating role of platform IT support
What affects manufacturing firms’ cross-channel integration capability and, ultimately, performance? Drawing on the capability hierarchy view, we investigate the impact of technology and marketing capabilities...
