12,468 Result(s)
-
Chapter and Conference Paper
Mercury Cadmium Telluride Infrared Photovoltaic Detector
In this paper, the feature of the technology fabrication and the performance was described.
-
Chapter
Optical Technique for In-Process Measurement of Surface Roughness During A.C.C. Grinding
Based upon the principle of Adaptive Computer Control (ACC) of machine tools, the overall problems of ACC Control of the grinding process is initially discussed in general terms. Following this, the paper conc...
-
Chapter
Micro-Computer Control of an Electrochemical Machine
Interfaces have been built so that a 10 000 A Anocut electrochemical machine can be controlled by a Commodore PET micro-computer. The computer directly reads ram position, machining current and electrolyte flo...
-
Chapter
An Experimental Investigation on the Sound Speed and “Choking” Phenomenon of Gas-Liquid Two-Phase Flow in the Electrochemical Machining (ECM) Gap
The flow through electrochemical machining (ECM) gap is a gas-liquid two-phase flow (GLF). The investigation on it has important significance for mastering the ECM sha** law and raising the ECM accuracy.
-
Article
Numerical computation of the emission current in electron guns
A computer program for evaluating the emission current in electron guns has been developed, and good agreement between evaluations and experiments has been achieved. The computational model is based on the sta...
-
Article
Detection in weibull and log-normal noises
The discrete-time detection of narrowband coherent and incoherent pulse train signals in narrowband non-Gaussian noise is investigated. The locally optimum (LO) detector structures are developed and found to b...
-
Article
Numerical computation of the deflection fields in magnetic yokes with wedged coil-sections and in electrostatic deflectors with planar electrodes
The computational methods of deflection fields in magnetic yokes with wedged coil-sections and electrostatic deflectors with planar electrodes are discussed. The magnetic yokes with wedged coil-sections can be...
-
Article
Diffraction theory and engineering calculation of open resonators of the circular and coaxial waveguide types for gyrotron
By using the method of transverse-section, the reflective coefficient of diffraction in the open-end of resonators with slowly varying cross-section under general unsymmetrical mode conditions can be found by ...
-
Chapter
The Compensation for Deviation by Means of Micro-Computer in NC Milling Machines
Abstract
-
Article
A s-band 2.5 mw high power broadband klystron
In this paper, the design considerations of a high-efficiency high-gain broadband klystron are described. Its buncher has been studied by using small signal gain and large signal efficiency programs. With smal...
-
Article
Irradiation damages in electron beam lithography
The irradiation damages in the electron beam lithography (EBL) to Al-gate MOS capacitors in the ranges of 10–30 keV and 10−6–10−3C·cm−2 and the effects of annealing on damages at low temperature (<500°C) are give...
-
Chapter
Adaptive Analysis Refinement and Shape Optimization—Some New Possibilities
Engineers have turned to shape optimization of structures to assure the efficient use of finite element analysis in producing safe and economical designs. Constraints on stresses and displacements should howev...
-
Article
Likelihood ratio detection of swerling II targets in Rician clutter
The discrete time detection of Swerling II targets in Rician clutter is investigated. The likelihood ratio (LR) detector is structured when the clutter steady part is coherent and noncoherent are developed res...
-
Article
Design and performance of compact low noise GaAs MESFET amplifiers for UHF operation
The design considerations and experimental results of compact low noise GaAs MESFET Amplifiers for UHF operation are described in this paper. The miniaturized and optimized circuits are obtained by means of sp...
-
Article
Mode competition of the gyrotron under high efficiency operating conditions
Mode competition — interaction between a mode and another mode — is due to the non-linearity of the relativisitc factor γ. At the beginning of a multimode oscillating, the behavior of the multimode oscillating...
-
Article
The research of resonant cavity with elliptical cross-section at moderate eccentricity in gyrotron
In this paper, the method of calculating cut-off frequencies of TE modes in elliptical waveguide is given. From the calculations, it is demonstrated that the gyrotron utilizing a cavity with elliptical cross-s...
-
Article
General mathematical theory of large deflections of thin plates with some holes
The theoretical analysis and the numerical computations for the problem of a thin plate with large deflection and some holes become much more difficult due to the multi-valued properties of the stress functionF a...
-
Article
MCA-newton method for circuit yield estimation and optimization
An algorithm for circuits yield estimation and optimization is described. To obtain the first and second derivatives of yield with respect to center and obtain maximum production yield, Monte Carlo analysis (M...
-
Article
Effects of electron beam prebunching on small and large signal characteristics in the gyroklystron
-
Article
General mathematical theory of large deflections of the thin plates with some holes