-
Article
Bioinspired design of integral molded Janus silk fibroin-MXene evaporator for efficient solar vapor generation
Solar vapor generation is a promising sustainable technology that uses solar distillation to produce fresh water from seawater and wastewater, hel** relieve global water resource shortage. Here, inspired by ...
-
Article
Open AccessUltra-efficient MCF-7 cell ablation and chemotherapy-integrated electrothermal therapy with DOX–WS2–PEG–M13 nanostructures
Clinical trials have generated encouraging outcomes for the utility of thermal agents (TAs) in cancer thermal therapy (TT). Although the fast breakdown of TAs alleviates safety concerns, it restricts the therm...
-
Article
The FSI Simulation Between Hot Metal Flow and the Hearth of a Blast Furnace During Opening Stage of Tap**
The start-tap** stage is the most unsteady stage for hearth operation in a blast furnace; this causes highly alternating stress in the hearth brickwork, which disrupts the design and operation of the blast f...
-
Article
Microstructure evolution and mechanical properties of Mg-9Al-1Si-1SiC composites processed by multi-pass equal-channel angular pressing at various temperatures
In this study, Mg-9Al-1Si-1SiC (wt%) composites were processed by multi-pass equal-channel angular pressing (ECAP) at various temperatures, and their microstructure evolution and strengthening mechanism were e...
-
Article
Tuning Li3PO4 modification on the electrochemical performance of nickel-rich LiNi0.6Co0.2Mn0.2O2
Surface deterioration occurs more easily in nickel-rich cathode materials with the increase of nickel content. To simultaneously prevent deterioration of active cathode materials and improve the electrochemica...
-
Chapter and Conference Paper
Study on the In-mold Flow Behavior Driven by a Subsurface Electromagnetic Stirring for IF Steel Slab Casting
A three-dimensional numerical model coupling , and level fluctuation has been developed to investigate the flow behavior of molten steel in a slab continuous casting mold for interstitial-free (IF) steel. Acc...
-
Article
Use of high-resolution X-ray computed tomography and 3D image analysis to quantify mineral dissemination and pore space in oxide copper ore particles
Mineral dissemination and pore space distribution in ore particles are important features that influence heap leaching performance. To quantify the mineral dissemination and pore space distribution of an ore p...
-
Article
Investigations into the slip behavior of zirconium diboride
The slip systems in ZrB2 flexural tested at 1000 °C and 1500 °C have been quantified. The dislocations in both samples were long and straight with a dislocation density of approximately 1013 m−2. The structure of...
-
Article
Highly bendable, transparent, and conductive AgNWs-PET films fabricated via transfer-printing and second pressing technique
Highly bendable, transparent, and conductive films composed of silver nanowires (AgNWs) network and polyethylene terephthalate (PET) substrate were prepared by a transfer-printing and second pressing technique...
-
Article
Formation and properties of high Fe-content Fe-(B-Si)-Zr bulk amorphous alloys
The present work is devoted to the development of Fe-(B-Si)-Zr amorphous alloys with high glass-forming ability and good magnetic properties. Using the cluster-plus-glue-atom model proposed for ideal amorphous...
-
Article
Surface modification of wollastonite by the mechano-activated method and its properties
Surface modification of wollastonite particles using titanate as a modification agent incorporated by simultaneous wet ultra-fine grinding in a laboratory stirred mill was investigated. The physical, physic-ch...
-
Article
Influence of dicalcium phosphate dihydrate coating on the in vitro degradation of Mg-Zn alloy
To reduce the degradation rate and further to improve the biocompatibility of magnesium alloy, dicalcium phosphate dihydrate (CaHPO4·2H2O, DCPD) has been fabricated on a kind of magnesium-zinc alloy by way of ele...