![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Stabilization technology and corrosion mechanism of rust layer on Q370 weathering steel surface
A newly developed rust layer on Q370qENH weathering steel (sample C) was studied under dry–wet cycle test of 3.5 wt.% NaCl solution and salt spray test, compared with the bare weathering steel (sample A) and t...
-
Article
Effect of solution treatment on microstructure and mechanical properties of as-cast Al-12Si-4Cu-2Ni-0.8Mg-0.2Gd alloy
Effect of solution treatment on microstructure and mechanical properties of Al-12Si-4Cu-2Ni-0.8Mg-0.2Gd alloy was investigated. Results show the Si particles become stable and more intermetallic compounds diss...
-
Article
Interface characteristics between TiN and matrix and their effect on solidification structure
Heterogeneous nucleation is an effective way to promote the dispersion and precipitation of second-phase particles in steel and refine the grain size of the solidification structure. Not only refining as-cast ...
-
Article
Aluminum, titanium and oxygen control during electroslag remelting of stainless steel based on thermodynamic analysis
Experimental investigation and thermodynamic calculation were carried out to study the effect of slag on alloying elements during electroslag remelting with develo** a thermodynamic model to control titanium...
-
Article
Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment
Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment was investigated. Fractographies and microstructures of heat treated samples were observed using a scann...
-
Article
Refinement and fracture mechanisms of as-cast QT700-6 alloy by alloying method
The as-cast QT700-6 alloy was synthesized with addition of a certain amount of copper, nickel, niobium and stannum elements by alloying method in a medium frequency induction furnace, aiming at improving its s...
-
Article
Wear behavior and mechanism of a sliding pair of 0. 1C-3Cr-2W-V nitrided steel rubbing against an aluminum bronze alloy
Wear behavior and mechanism of plasma nitrided steel oscillating against a heat-treated and an untreated aluminum bronze alloy were investigated using an Optimol SRV tribometer. The influence of heat treatment...
-
Article
Influence of Cr element on impact fracture process of ductile Ni-resistant alloyed iron at low temperature
In this study, in order to investigate the influence of Cr element on the impact fracture process of ductile Ni-resistant alloyed iron at low temperature, different contents of Cr element were added to ductile...
-
Article
Hot Deformation Behavior of As-cast AISI M2 High-speed Steel Containing Mischmetal
The hot deformation behavior of as-cast AISI M2 high-speed steel containing mischmetal (RE) has been investigated on a Gleeble-3500 simulator in the temperature range of 1000—1150 °C and strain rate range of 0...
-
Article
Application of Temperature Inference Method Based on Soft Sensor Technique to Plate Production Process
There is a certain extent of measuring error for each pyrometer in plate production process, which has a great impact on process control system. A soft sensor technique is used to calculate the confidence inte...