635 Result(s)
-
Article
Reaction of 1,4-poly(2-trimethylsilylmethyl-1,3-butadiene) with phenylsulfenyl chloride
Reaction of 1,4-poly(2-trimethylsilylmethyl-1,3-butadiene) with phenylsulfenyl chloride yields predominantly poly(3-methylene-2-phenylthiobutane). The mechanism of this reaction is discussed. The product polym...
-
Article
Addition of dichlorocarbene to cis-1,4-poly(2-trimethylsilylmethyl-1,3-butadiene)
Copolymers made up of 1,4-(2,3-dichloromethylene-2-trimethylsilylmethyl-1,3-butadiene) (I) and 1,5-(3-chloro-2-methylene-pent-3-ene) (II) units have been prepared by potassium fluoride elimination of trimethyl...
-
Article
Study on structure-property relationship of polyimide blends
Three pairs of polyimide/polyimide blends (50/50 wt%) with different molecular structures were prepared by two ways, i.e. mixing of the polyamic acid precursors with subsequent imidization, and direct solution...
-
Article
Deformation behaviour in α/β two-phase super-plastic brass
α/β brass consists of hard α and soft β phase in its superplastic temperature range. Because of the difference between their mechanical properties, the superplastic behaviour of the alloy differs from that of ...
-
Article
Deformation behaviour in α/β two-phase super-plastic brass
α/β brass consists of hard α and soft β phase in its superplastic temperature range. Because of the difference between their mechanical properties, the superplastic behaviour of the alloy differs from that of ...
-
Article
SEM examination of the oxide-metal interface formed during the aqueous corrosion of a Zr-2.5 wt% Nb alloy
The oxide-metal interface formed during the aqueous corrosion of a Zr-2.5 wt% Nb alloy has been studied by SEM, using a specimen preparation method which also has potential application to other materials conta...
-
Article
Theory of hydrogen-assisted crack growth
A model for hydrogen-induced cracking is proposed and developed on the assumption that hydrogen enters the embrittling process zone (EPZ) ahead of the crack-tip and promotes localized plastic flow which is pro...
-
Article
Influence of Mo addition on the intrinsic magnetic properties and crystallization behaviour of FeSiB glass
-
Article
Observation of rapid explosive reaction in Ni-Al bilayer films
-
Article
The growth of single-crystal fibres directly from source rods made of ultrafine powders
By means of the laser-heated pedestal growth (LHPG) method, the growth of single-crystal fibres directly from source rods made of ultrafine powders is studied in this paper. The ultrafine powders were obtained...
-
Article
Surface-enhanced Raman scattering and cyclic voltammetry studies of synergetic effects in the corrosion inhibition of copper by polybenzimidazole and mercaptobenzimidazole at high temperature
The inhibition of copper corrosion by polybenzimidazole and mercaptobenzimidazole at room and high temperature was assessed by in situ surface-enhanced Raman scattering (SERS) and cyclic voltammetry (CV). It was ...
-
Article
Fractal behaviour in fatigue of materials
-
Article
The influence of alumina dopant on the structural transformation of gel-derived nanometre titania powders
-
Article
Microstructural evolution of α(Fe,Si) in Fe82Si6B12 metallic glass film
-
Article
Interlaminar fracture of carbon-thermoplastic polyimide composites
Mode I interlaminar fracture of a novel amorphous thermoplastic polyimide reinforced with unidirectional carbon fibre has been studied experimentally using double cantilever beam specimens and scanning electro...
-
Article
Brownian dynamics simulation of rodlike polymers under shear flow
The highly nonlinear behaviors of rodlike polymers in nematic phase under shear flow are studied with Brownian dynamics simulation. The LebwohlLasher nematogen model is taken as the prototype of the simulation...
-
Article
Effect of hydrolysis water on the preparation of nano-crystalline titania powders via a sol-gel process
-
Article
Further study on the fractal behaviour in fatigue of materials
-
Article
Study on structure of a new binding phase in polycrystalline diamond
-
Article
Ageing behaviour of t′-phase in a hot-pressed ZrO2(4 mol% Y2O3) ceramic
The ageing behaviour of unequilibrium tetragonal (t′) phase and its resultant effect on the mechanical properties of hot-pressed ZrO2(4 mol% Y2O3) ceramic have been investigated by means of transmission electron ...