Search
Search Results
-
Grape Seed Extract as an Environment-Friendly Green Inhibitor for Corrosion of Mild Steel in 1 M Sulfamic Acid
A corrosion inhibition study of mild steel in 1 M sulfamic acid was conducted using grape seed extract (GSE) as a possible green inhibitor....
-
Materials challenges for electric vehicles
Electric vehicles provide the ability to substantially reduce or eliminate greenhouse gas emissions from transportation. Electric vehicles utilize a...
-
Advancing electric mobility with lithium-ion batteries: A materials and sustainability perspective
In the last three decades, lithium-ion batteries (LIBs) have become one of the most influential technologies in the world, allowing the widespread...
-
Achieving energy efficiency and sustainability in galvanization process: A case study on Indian tower manufacturing industry
AbstractThere is a significant gap between India’s energy production and its demand. Dependency on energy imports to meet the energy requirement...
-
Effect of Initial Powder Condition on Precipitation Behavior in Cold Sprayed Al7075 Alloy Coatings
This study explores the potential of cold spray technology for repairing high-strength Al7075 alloy components, particularly in the aerospace...
-
Non-firing Synthesis for Oxides: From Natural to Synthetic Forms with Energy-Efficient and Sustainable Processes
Non-firing functional oxide materials are attracting significant interest due to their suitability for a wide range of applications, particularly in...
-
(Ultra)wide-bandgap semiconductors for electric vehicles
The power electronics charging the battery or driving the motor is often the limiting factor for cost and efficiency. In the race for lowering...
-
Sustainability considerations in bio-hydrogen from bio-algae with the aid of bio-algae cultivation and harvesting: Critical review
AbstractMicroalgae present an enticing alternative to conventional fossil fuel-dependent technologies for producing hydrogen, offering an intriguing...
-
Understanding the explosion risk presented by ammonium nitrate and aluminium home-made explosives detonated as surface charges in hexahedral main charge containers
Ammonium nitrate and aluminium (AN–Al) has been used as a typical homemade explosive (HME) by non-state actors since the turn of the century. Despite...
-
The Effect of Laser Power on Microstructure and Mechanical Properties between Medium Mn Steel and DP980 Joint by Laser Welding
This paper studies the effect of laser power on the microstructure and mechanical properties of medium Mn steel (MMS) and dual-phase (DP980) steel...
-
Performance Evaluation of Bryophyllum Pinnatum Leaves Extract as Corrosion Inhibitor for Mild Steel in 1 M Phosphoric Acid
The severe consequences of corrosion process cause global issues most especially in petroleum refineries. This research investigates performance...
-
Effects of Cooling Rate and Ti Content on the Solidification Characteristics of Al-Ti Alloys
In this paper, the solidification characteristics of Al-Ti alloys and the precipitation behavior of Al 3 Ti phases at different Ti contents and cooling...
-
Strategic Development of Ni–Cu–Fe2O3 Composite Coatings to Strengthen Mild Steel Against Corrosion
Mild steel is extensively employed in various industries due to its affordability and versatility. However, its susceptibility to corrosion poses a...
-
Quantitative and Qualitative Analysis of Advanced Aluminum Composites for Heat Transfer Properties
The effectiveness of improvising heat transfer material when building heat sinks gave rise to the concept for this study. The development of...
-
Study on Stress Corrosion Cracking of X100 Pipeline Steel in NS4 Solution
The X100 pipeline steel is classified as a type of high-strength, low-alloy steel that is mostly used in the construction of pipelines designed for...
-
Utilizing γ- and θ-Alumina from Aluminium Black Dross for Catalytic Applications: Hybrid Sustainable Pyro–Hydrometallurgy and Residue Heat Utilization
This study is aimed at extracting γ- and θ-alumina from recycled black aluminium dross for catalytic applications, employing a novel hybrid...
-
A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces
Adhesive contact with the effect of tangential force may have important implications in friction and wear performances of small-sized devices and...
-
Stability of Ti-6Al-4V Mechanical Properties Across Laser Powder Bed Fusion Vendors and Platforms: Insights on Material Maturity
Adoption of laser powder bed fusion (L-PBF) as a trusted manufacturing process for conventional alloys like Ti-6Al-4V (Ti64) requires a mature...
-
Modification of organofluorosilicone styrene–acrylate emulsions with lignin participation and characterization of their properties
In this study, we present a method to enhance the hydrophobic properties of organofluorosilicon styrene–acrylate emulsions while simultaneously...
-
Preparation of water-based ink binders from acrylic-modified rosin resins
In this study, rosin polyethylene glycol ester was prepared by the reaction of natural rosin with PEG-400. It was modified with acrylic acid to...