Search
Search Results
-
Development of Ni-Al-Based Composites Reinforced with Recycled AA7075 + AA1050 and Ceramics Produced by the Sintering + Forging Process
In this study, the microstructural formation and static/cyclic compression behavior of “Ni-Al+AA7075+AA1050”-based composites reinforced with... -
Development of Self-Healing Glass Fiber–Reinforced Laminate Composites for Wind Turbine Blades
Among the various renewable energy sources, wind energy offers an effective solution to energy providers. Onshore wind turbines are generally... -
Investigating the Mechanical Performance of Vitrimers Reinforced with Hollow Glass Beads Using Digital Image Correlation Technique
Vitrimers are a new class of polymeric materials, which contain exchangeable cross-links. In the recent years, several polymeric reactions and... -
Development of Recycled Alumix431-Based Composites Reinforced with TiB2, TiC, and B4C Fine Ceramic Powders for Aircraft Applications Produced by a Combined Method: Sintering + Forging
In this chapter, the microstructural formation and static/cyclic compression behavior of recycled Alumix (aluminum alloy) matrix hybrid composites... -
Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” Based Composites Produced by Hot Forging Diffusion Process
Within the framework of the common research project, the mechanical properties and fatigue behaviour of recycled thin sheet Ti-Al-based composites... -
Development of Recycled Aluminium (AA7075 + AA1050)-Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sintering + Forging
A new recycled hybrid composite has been designed by using a special do** process and a combined method, “sintering + forging” of recycled “AA... -
Tribocorrosive Analysis of Titanium Grade V in Different Biological Solutions
The tribocorrosion and especially the (bio)tribocorrosion has been spreading in medical community due to its direct effect on prosthesis life cycle.... -
Development of Low-Friction Technology for Treating Nitrogen-Containing Diamond-Like Carbon Coatings in Ambient Air Using Dielectric Barrier Discharge
In this study, we develop a new surface treatment technology for diamond-like carbon (DLC) coatings using dielectric barrier discharge (DBD) in... -
Comparison Between Numerical and Experimental Static Performance and Sensitivity Study on a Tilting Pad Journal Bearing in a Load on Pad Configuration
Computational software based on Reynolds equation is widely used in the design of tilting pad journal bearings, its accuracy generally satisfactory... -
Clarification of the Corrosion and Frictional Behavior of Nitrogen-Doped ta-C Coating in Nitride Acid Solution
The ta-C coating, characterized by a high fraction of sp3 hybridized structure, was considered as a potential protective film for preventing bearing... -
Effect of Hydrogen Do** for ta-C on Friction of ta-C:H Sliding Against Bearing Steel in High Temperature and High Vacuum
The ta-C coating, characterized by a high fraction of sp3 hybridized structure, was considered as low friction and high wear resistant coatings in... -
Preliminary Development of a Fluidic Device for Astrobiology Missions
This paper presents the first steps in creating an observable remote CubeSat spacelab for biological processes, by introducing a possible fluidic... -
Topography Measurements Analysis Between Road Surfaces and Their Silicone Replicas
Statistical information on randomly rough surfaces such as roads is a cornerstone in the tribology field since it provides great insights into topics... -
Tribological Investigations of Waste Cooking Palm Oil Using Them for Production of Lubricants
The purpose of this research was the evaluation the lubricating properties of waste cooking oil (WCO) of palm oil and its mixtures with waste cooking... -
Non-Invasive Experimental Investigation for Time-Temperature Superposition Shift Factor Estimation in Viscoelastic Materials Characterization
The characterization of viscoelastic materials, important for mechanical, aerospace, biomedical, and many other fields of application, poses an... -
Pin-on-Disk Wear Investigation on Bronze Coating – Part 1: Definition of the Test Methodology
Some tests have been performed with a pin-on-disk experimental apparatus to define the methodology to be used in a successive experimental campaign... -
Friction Coefficient of the PVD-AlCrN Coated Cemented Carbide and Hardened Steel Tribo-Pair Under Dry Sliding
Can a simple tribometric experiment be used to estimate the tool-chip interface friction coefficient in high speed cutting (HSC) to provide a... -
Investigation on the Static Characteristics of a Dynamic Gas Thrust Bearing with Spiral Grooves for a Small-Scale High-Speed Application
This paper focuses on the design of a spiral groove thrust bearing for a high-speed, small-scale radial compressor rotating at 200 krpm. The... -
Temperature Profile at Pad’s Leading Edge of a Titling-Pad Journal Bearing: CFD Modeling and Experimental Validation
Tilting-pad journal bearing (TPJB) is a mechanical component that utilizes the hydrodynamic lubrication principle to support a rotating shaft in... -
Analysis and Modeling of a Mechanical Power Recirculating Test Bench for Gears Testing
The optimization of a transmission goes through the evaluation of specific parameters such as efficiency, overall dimensions, noise, and economy....