124 Result(s)
-
Chapter and Conference Paper
Technical Route to Develop High-Tg Epoxy Composite That Is Water Degradable at Low Temperature
Degradable polymers and have found extensive applications in various industries but are currently limited to low-temperature usage due to their low glass transition temperature polymer , predominantly com...
-
Chapter and Conference Paper
Modification and Evaluation of Desulfurization and Denitrification of 360 m2 Sintering Machine in Shougang Qian’an Company
Technical transformation have been carried out on of 360 m2 sintering machine in Shougang and Steel Company. system was added at the same efficiency of sintering flue gas was improved by changing ...
-
Chapter and Conference Paper
Comparison of Critical Shear Strain Evaluations for Simple Shear Test
The simple shear test for sheet metals has become a topic of growing interest in recent years, whose significance could be reflected in two aspects: obtaining the mechanical behaviors under large strain and in...
-
Chapter and Conference Paper
Technology Development and Process Optimization of Bottom-Blowing O2–CO2–CaO in Dephosphorization Converter
In the 300 t dephosphorization , technology has been developed and a range of tests executed to optimize . A comprehensive analysis has been carried out on the effects of “tap** temperature T”, “slag R” a...
-
Chapter and Conference Paper
Silicon-on-Silicon Oxide Metalens: Design and Fabrication Aspects
A metalens operating at 4 µm is numerically designed. By adjusting the diameters of the pillar array from 500 to 1000 nm, the metalens achieves 2π-phase modulation with over 75% transmission efficiency. Furthe...
-
Chapter and Conference Paper
Exploring the Service Life Extremes of 716 in Highly Corrosive Environments
716 ( ) is a commonly selected alloy for multi-decade oilfield applications with established environmental guidance from NACE MR-0175. Based on thermodynamic calculations, the historical limit determined using...
-
Chapter and Conference Paper
Coating Development for High Temperature Dissolvable Rubber Element in Dissolvable Plug Applications
Dissolvable tools have been used more in unconventional oil and gas operations in recent years. Currently, more and more wells in Southwest of China requires (HT) . The HT needs to hold 70 Mpa pressure di...
-
Chapter and Conference Paper
Novel Fabrication of Ultra-thin Copper/SS304L Composite Microchannels
Microchannels on metallic substrates are essential parts of microreactors, micro heat exchangers, micro heat sinks, and fuel cell bipolar plates. Because of superior properties, such as good corrosion resistan...
-
Chapter and Conference Paper
The Effects of Annealing on Microstructure and Mechanical Properties of Monolithic Low Carbon Steel and Medium Manganese Steel/low Carbon Steel (Mn8/SS400) Bimetal Composite
Metal composites have attracted many interests due to their multi-functionality and excellent overall performance. Medium Mn steels have received much attention as the third-generation high strength steels owi...
-
Chapter and Conference Paper
Measurement and Analysis of the Strength Differential Effect of 5000 Series Aluminum Alloy Sheet
Tension-Compression Asymmetry (TCA) of a 1.5-mm-thick 5000-series aluminum alloy sheet, A5083-O, is measured using a uniaxial tensile test and in-plane compression test. In particular, the TCA observed for ann...
-
Chapter
Advances in Manufacturing and Processing of Discontinuous Particle-Reinforced Titanium Matrix Composites (TMCs)
) have a high , , high , , , so they are widely used in , weaponry, and other are difficult to process using traditional technology, and the mainly rely technology to prepare. This chapter intr...
-
Chapter
All Inorganic Perovskite Solar Cells
All ) have drawn growing attention, due to their exceptional and suitable for attaining high via tandem architecture. Because of the intense research efforts in recent years, many of the challenges ,...
-
Chapter and Conference Paper
A Discussion on Thermal Impact of Anode Change in Aluminum Reduction Cell
is the most important in industry. Influence of new is mainly concentrated in two aspects: thermal impact and ) impact. This paper only focuses on the thermal impact part. The paper theoretically calcu...
-
Chapter and Conference Paper
The Incipient Failure of Glass Beads and Glass Bead/Epoxy Composites Under Compression as Observed by In Situ X-Ray Micro-Computed Tomography
Granular materials are utilized in various applications, including civil engineering, energy, and defense. They exhibit very different mechanical behavior under different loading conditions. Glass beads are of...
-
Chapter and Conference Paper
Analysis of Chemical Composition of Artemisia for Medicinal and Culinary Purposes
There is no clear-cut distinction between medicine and food. Artemisia is one of the best species of medicinal plants that have been widely used in numerous parts of the world for it is believed to have numerous ...
-
Chapter and Conference Paper
Mg3V2O8: A Promising Cathode Material for Aqueous Mg-ion Battery
(RMBs) have attracted lots of attention due to the high safety characteristics, low cost, and similar electrochemical characteristics to lithium. (Mg3V2O8, MVO) has stable three-dimensional framework and large...
-
Chapter and Conference Paper
The Expanded Industrial Pilot of SAMI’s NCCT+ Technology
Shenyang and Magnesium Engineering and Research Institute Co. Ltd (SAMI) has carried out a series of technical research and experiments since 2015 to develop a more -friendly and energy-efficient techno...
-
Chapter and Conference Paper
Digestion Efficiency Improvement of Gibbsite-Boehmite Bauxite
performance of - is studied in this paper. The chemical and mineral compositions of a - from Australia are analyzed and tested by . Test results show that the contains ≥ 50% of ( and ) and 9% o...
-
Chapter and Conference Paper
Development of Compound Vertical Retort Technology for Magnesium Production and Its Application
This paper introduces a new , compound vertical retort technology production. The workflow and key equipment and technologies were introduced. With the new technology, a demonstration unit was established i...
-
Chapter and Conference Paper
Improvement of Pitting Corrosion Resistance of 304 Stainless Steel with Lanthanum Addition
In the current and of with and addition were analyzed using a scanning electron microscope attached with an energy dispersive spectrum and an anodic potentiodynamic polarization test in 3.5 wt% NaCl so...