-
Article
Automation of drying of siphon parts in tunnel-type dryer
When the set timetables for the passage of cars are observed and adjustment is atuomatic, drying becomes stable and the amount of spoilage due to cracks is reduced.
-
Article
Use of cermet filters for purifying samples of open-hearth furnace flue gases
-
A method has been successfully worked out for purifying samples of flue gas by cermet filters under high temp...
-
-
Article
CdSe : Sb electrode for photoelectrochemical applications
CdSe : Sb thin film electrodes with Sb3+ do** concentrations from 0 to 5 mol % were prepared in an aqueous alkaline medium (pH≈10) by a solution-growth technique. Use of these films was made as an active photoe...
-
Article
Nature of the interface between AA7072 alloy explosively clad to AA8090 aluminium alloy
Aluminium-lithium based alloy plates were explosively clad with Al-1 wt% Zn alloy sheets. Clad plates were evaluated for bond continuity, interface shape, microstructure, variation of elemental concentrations ...
-
Article
Poly(vinyl pyrolidone) coated silver nano powder via displacement reaction
-
Article
Charge transfer at the antiscale composite layer-electrolyte interface
Properties of composite coatings based on oxide layers formed on a titanium surface using the plasmic electrolytic oxidation method and processed using Forum® superdispersed polytetrafluorinethylene were inves...
-
Article
Work-Hardening Behavior of the Ni-Fe Based Superalloy IN718
Flow behavior of many metals and alloys in the region of uniform plastic strain is normally expressed by the simple power law relationship (σ = Kε p ...
-
Article
Synthesis and characterization of cobalt–nickel alloy nanowires
We report on the synthesis and magnetic characterization of ordered arrays of cobalt–nickel alloy nanowires. These alloy nanowires were electrodeposited into the pores of anodic alumina templates. The physical...
-
Article
Sulfidation Characteristics of an Advanced Superalloy and Comparison with Other Superalloys Intended for Gas Turbine Use
Sulfidation may occur even in an overall oxidizing environment beneath a corrosion product which assumes the role of a diffusion barrier allowing sulfur species transport at a faster rate when compared with th...
-
Article
Evaluation of the Competitiveness of Wall Building Materials with Glassy Protective-Decorative Coatings Obtained by Plasma Fusing
The results of research on the development of a desirability scale for evaluating the competitiveness of wall building materials with glassy protective-decorative coatings obtained by plasma fusing are present...
-
Article
Photoelectrocatalytic degradation of methyl red using sprayed WO3 thin films under visible light irradiation
WO3 thin films have been deposited onto glass and FTO coated glass substrates using simple chemical spray pyrolysis technique. The effect of solution concentration on the photoelectrochemical (PEC), structural, m...
-
Article
Photoelectrocatalytic degradation of methyl blue using sprayed WO3 thin films
WO3 thin films have been deposited using simple chemical spray pyrolysis technique and successfully applied as photoanode for photoelectrocatalytic degradation of methylene blue. The films were deposited on bare ...
-
Article
Fabrication of Ni0.4Zn0.6Fe2O4–BaTiO3 bilayered thin films obtained by spray pyrolysis method for magnetoelectric (ME) effect measurement
The Ni0.4Zn0.6Fe2O4 ferrite, BaTiO3 ferroelectric and Ni0.4Zn0.6Fe2O4–BaTiO3 bilayered magnetoelectric thin films have been synthesized onto the quartz substrates at optimized substrate temperatures (400, 250 °C)...
-
Article
Stress Corrosion Cracking of a Maraging Steel Shear Bolt Used in the Interstage Structure of a Satellite Launch Vehicle
M250 grade maraging steel is used widely in satellite launch vehicle structures due to its excellent combination of strength and toughness. One of the maraging steel bolts used in interstage structures was fou...
-
Article
Supercapacitive Performance of Lithium Doped and Undoped NiFe2O4 Thin Films by Chemical Deposition Method
Lithium (Li) doped and undoped NiFe2O4 thin films for supercapacitor application have been prepared through the chemical deposition method. The Li doped and undoped NiFe2O4 thin films for structural, morphologica...
-
Article
Enhanced NO2 gas sensing performance of Ni-doped ZnO nanostructures
Pure and 1–4 at.% Ni-doped ZnO (N0Z-N4Z) nanostructures have been successfully prepared by simple and cost-effective co-precipitation method. The prepared nanostructures were studied using XRD, FESEM, HRTEM, EDX,...
-
Article
Studies on structural, spectral and morphological properties of co-precipitation derived Co-doped ZnO nanocapsules for NO2 sensing applications
Pristine and Co-doped ZnO (CZ) nanocapsules (NCs) have been successfully prepared using a simple and cost-effective co-precipitation method. The effect of 1–4 at.% Co-doped ZnO (C1Z–C4Z) samples on physicochemica...
-
Article
Ratcheting Fatigue Behavior of Modified 9Cr–1Mo Steel at Room Temperature
Fusion reactor components undergo asymmetric cyclic loading,that leads to a progressive increase in plastic strain and causes deterioration in life of engineering components. This investigation deals with fati...
-
Article
Effect of gamma-ray irradiation on structural and optical property of WSe2 film
In the present work, RF sputtering synthesis method is used for the synthesis of tungsten diselenide (WSe2) films. These WSe2 films were studied using X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelect...
-
Article
Effect of Long-Term Exposure on Microstructure and Hardness of Aged Haynes 282 Alloy
Nickel-based superalloy, Haynes 282, is a promising material for aero and land-based gas turbine applications and advanced ultra-supercritical (AUSC) steam power plants due to its outstanding combination of hi...