![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Choice of the material for production of a ship propeller shaft
-
Article
Influence of a thermal hold at the nitriding temperature on the fatigue resistance of 36Kh2N2MFA steel melted by different methods
-
Article
Structural sensitivity of steel with sign-changing loads
-
Article
Fatigue and corrosion-fatigue strengths of faced shafts
-
Article
Appearance of a scale effect with fatigue of surface-hardened steel shafts under conditions of fretting corrosion
-
Article
Increasing the fatigue and corrosion-fatigue strength of shafts in press-fitted joints by mechanoultrasonic treatment
-
Article
Fatigue strength of heavy-duty surface-hardened shafts in a press-fitted joint
-
Article
Effect of preliminary cold plastic deformation on the properties of maraging steels
Cold plastic deformation (rolling and forging) increases the strength of quenched maraging steels with no substantial reduction of the ductility. The effect of strain hardening is more evident after subsequent...
-
Article
Effect of electrolytic cadmium-chromium plating on the corrosion-fatigue strength of carbon steel
-
Article
Setup for fatigue and corrosion fatigue testing of large shafts
-
Article
Effect of size of press-fitted bushings on the fatigue and corrosion-fatigue strength of steel shafts
-
Article
Effect of size factor on the corrosion fatigue of steel shafts with pressfitted parts
-
Article
Corrosion-fatigue strength of steels used for the fabrication of ship propeller shafts
The results of a study of the fatigue and corrosion-fatigue strength of steels used for the fabrication of propeller shafts of large sea-going vessels are reported. It was established that high-strength steels...
-
Article
Size factor in the fatigue of steel shafts with press-fitted parts
This article describes the results of an investigation of the effect of size factor on the fatigue (in air) of steel shafts 5, 12, 27, and 50 mm in diameter with press-fitted bushings. It was established that ...
-
Article
Effect of stress raisers on the working characteristics of ship-propeller shafts
The effect of stress raisers on the fatigue and corrosion-fatigue strength of steels used in the fabrication of ship-propeller shafts was studied. It was shown that shafts with sharp stress raisers have higher...
-
Article
Mechanical properties of maraging steel ON18K8M5T
-
Steel ON18K8M5T melted in a vacuum induction furnace has a high strength with satisfactory ductility and high...
-
-
Article
A method of fatigue testing of specimens with shrinkage-fitted bushings in sea water
A description is given of a testing machine and a method of corrosion-fatigue testing (in rotating bending) of specimens with shrinkage-fitted bushings.
-
Article
Fatigue strength of specimens with shrunk-on bushings
It was shown that the effect of shrinking-on operations on the fatigue strength of steel is observed in both neutral and active media (argon and air, respectively), the effect being more pronounced in air. Ste...