147 Result(s)
-
Article
Cutting performance of saw blades with microtextured rougher and finisher sawteeth
The problems of severe sawtooth wear, harsh sawing noise, and low surface quality during the processing of circular saw blades need to be solved. To improve the cutting performance of TiC-based cermet saw blad...
-
Article
Impact of cyclic loading and corrosion on the bond performance of steel–polypropylene hybrid fiber reinforced concrete
Steel–polypropylene hybrid fiber reinforced concrete (SPHFRC) is a class type of concrete material that shows superior performance and is noticing increasing engineering applications around the world. The effe...
-
Article
Open AccessHarnessing disordered photonics via multi-task learning towards intelligent four-dimensional light field sensors
The complete description of a continuous-wave light field includes its four fundamental properties: wavelength, polarization, phase and amplitude. However, the simultaneous measurement of a multi-dimensional l...
-
Article
An efficient interval moment method for uncertainty propagation analysis with non-parameterized probability-box
This paper proposes an efficient interval moment method (IMM) for uncertainty propagation analysis with non-parameterized probability-box (p-box), where the bounds of statistical moments and cumulative distrib...
-
Article
Conductive microsphere monolayers enabling highly conductive pressure-sensitive adhesive tapes for electromagnetic interference shielding
Conductive adhesive tape is one kind of electromagnetic interference (EMI) shielding materials for electronic packaging. However, the inferior conductivity of the pressure-sensitive adhesive (PSA) layer result...
-
Article
A Kriging-assisted two-stage adaptive radial-based importance sampling method for random-interval hybrid reliability analysis
For uncertain structures with the coexisting random and interval inputs, effectively estimating the lower and upper bounds of failure probability is always a challenge. To address this issue, this paper first ...
-
Article
Open AccessRecent Advances in Electrolytes for High-Voltage Cathodes of Lithium-Ion Batteries
With the increasing scale of energy storage, it is urgently demanding for further advancements on battery technologies in terms of energy density, cost, cycle life and safety. The development of lithium-ion ba...
-
Article
An efficient method for predictive-failure-probability-based global sensitivity analysis
Predictive failure probability (PFP)-based global sensitivity analysis (GSA) can reasonably measure the effect of overall uncertainty, inherent uncertainty, and distribution parameter uncertainty of input vari...
-
Article
scBERT as a large-scale pretrained deep language model for cell type annotation of single-cell RNA-seq data
Annotating cell types on the basis of single-cell RNA-seq data is a prerequisite for research on disease progress and tumour microenvironments. Here we show that existing annotation methods typically suffer fr...
-
Article
Band gap modulation of nanostructured WO3 nanoplate film by Ti do** for enhanced photoelectrochemical performance
Despite being a promising photoanode material for water splitting, WO3 has low conductivity, high onset potential, and sluggish water oxidation kinetics. In this study, we designed Ti-doped WO3 nanoplate arrays o...
-
Article
Fabrication of silica-based ceramic cores with internal lattice structures by stereolithography
Ceramic cores are widely used in investment casting, and ideal properties of cores are essential for high-quality castings. Under the circumstances requiring thick cores, solid cores are likely to encounter de...
-
Article
Effects of wind barriers on the aerodynamic characteristics of bridge-train system for a road-rail same-story truss bridge
Wind barriers are commonly adopted to prevent the effects of wind on high-speed railway trains, but their wind-proofing effects are greatly affected by substructures. To investigate the effects of wind barrier...
-
Article
Active flow control of S-duct by plasma synthetic jet
Flow separation and secondary flow in the S-duct of an aircraft engine cause severe pressure loss and airflow distortion at the outlet, lowering engine performance. Herein, a serial two-electrode plasma synthe...
-
Article
Application of transparent casting moulds prepared by additive manufacturing technology in hydraulic simulation
Hydraulic simulation is one of the critical methods to research the filling mechanism of molten metal in the casting process. However, it only performs on test pieces with relatively simple structures due to t...
-
Article
Open AccessRecovery of cobalt and copper from single- and co-contaminated simulated electroplating wastewater via carbonate and hydroxide precipitation
Wastewater containing cobalt and copper comprised of plating wash water, plant wash water, and equipment cooling and wash water is generated in the electroplating industry. These metals can be detrimental to h...
-
Article
Application of Artificial Neural Network in Predicting the Dispersibility of Soil
Under the action of seepage or surface erosion, earth dams, canal foundations, subgrades and embankments filled with dispersive soils can easily cause pi**, caves, gullies and other damages and even cause ac...
-
Article
Effect of electromagnetic parameters on melt flow and heat transfer of AZ80 Mg alloy during differential phase electromagnetic DC casting based on numerical simulation
Based on multi-physical field coupling numerical simulation method, magnetic field distribution, melt flow, and heat transfer behavior of a Φ300 mm AZ80 alloy billet during differential phase electromagnetic DC c...
-
Article
Experimental investigation on synergetic prediction of granite rockburst using rock failure time and acoustic emission energy
The frequent occurrence of rockburst and the difficulty in predicting were considered in deep engineering and underground engineering. In this work, laboratory experiments on rockburst under true triaxial cond...
-
Article
Open AccessSynergistic degradation of Methylene Blue by novel Fe-Co bimetallic catalyst supported on waste silica in photo-Fenton-like system
In this present study, a novel method to fabricate bimetallic Fe-Co catalyst supported on waste silica was investigated for the photo-Fenton-like (PFL) degradation of Methylene Blue (MB) dye. The uniqueness of...
-
Article
Experimental Study on the Effect of Thermal Treatment on the Water Stability of Compacted Loess
In this study, the water stability of compacted Yangling loess after thermal treatment was analyzed in detail. After heat treatment at temperatures of 400°C or less, Yangling loess disintegrates in water; thus...