Search
Search Results
-
Strain-tuned incompatible magnetic exchange-interaction in La2NiO4
Magnetic frustration is a route for novel ground states, including spin liquids and spin ices. Such frustration can be introduced through either...
-
Chirped gray and singular optical solitons with generalized quadratic-cubic law of self-phase modulation and nonlinear chromatic dispersion
The objective of this study to investigate chirped gray and singular optical solitons with nonlinear chromatic dispersion. The proposed nonlinear...
-
2D photonic-crystal-type surface relief grating for light with an azimuth angle
With the development of virtual reality, the projection design of the head-mounted display (HMD) requires improvement as well. The surface relief...
-
Enhancing surface properties and microstructure through influence of tool pin profiles on friction stir welded Al-Mg alloy
This investigation is effort to enhance the mechanical properties on friction stir welded Al-Mg alloy with different processing levels like tool pin...
-
Performance analysis of pyramid solar still with natural banana fibers and Kanche marbles
This research investigates the impact of different energy storage materials on the efficiency of a pyramid solar still (PSS) for producing drinkable...
-
MIMO–OFDM based optical millimeter wave generation for radio over fiber wireless communication systems
In this paper, 4 × 4 Multiple Input Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) based optical (mm) wave generation for...
-
Giant anomalous transverse transport properties of Co-doped two-dimensional Fe3GaTe2
In spintronics, transverse anomalous transport properties have emerged as a highly promising avenue surpassing the conventional longitudinal...
-
Effect of Nanostructured Additive Based on Graphene Oxide and Lignosulfonate on Water Absorption and Thermal Conductivity of Non-Autoclavated Aerated Concrete
AbstractAn assessment of the effect of various modifiers introduced into the composition of non-autoclaved aerated concrete (NAC) was made. The...
-
Beamforming of Electrically Tunable Plasmonic Graphene Strip Nanoantennas in the Terahertz, Far-Infrared, and Mid-Infrared Ranges
Abstract —The purpose of this work is to study, using automated modeling methods, the possibility of scanning in frequency and beamforming of...
-
Building a Model of the Physical Principle of Operation of an Autonomous Locomotive with a Steam Power Unit
AbstractThe article discusses the use of the engineering-physical method of exploratory design of an autonomous locomotive with a steam power unit at...
-
Magnetic phase transition and magnetocaloric effect in amorphous Gd52Fe28B20 alloy
Magnetic phase transition and magnetocaloric effect in the amorphous Gd 52 Fe 28 B 20 alloy are exhaustively explored. The melt spinning technique was...
-
Detecting dynamical causality via intervened reservoir computing
An abundance of complex dynamical phenomena exists in nature and human society, requiring sophisticated analytical tools to understand and explain....
-
The nonlinear absorption properties of TaSe2 and its application in ~ 2.0 µm pulsed solid-state lasers
Enhancing the performance of saturable absorbers (SAs) crafted from two-dimensional (2D) narrow-bandgap materials is crucial for their use...
-
Boosting solar cell performance: optimization of WS2 absorber with Cu2O HTL & ZnSe ETL using SCAPS-1D simulation
Thin-film photovoltaic materials like WS 2 offer abundant, low-cost, transparent energy sources. WS 2 boasts high carrier mobility, a superior optical...
-
Investigation of light trap** and NiOx anti-reflection layer in ultra-thin crystalline silicon by ray tracer
In this work, the optical characterizations based on ray tracing for ultra-thin crystalline silicon (c-Si) (20 μm absorber thickness) solar cells...
-
Analysis of ground and space geoelectric field during geomagnetic storms over Fresno, CA USA: wavelet coherence approach
The solar wind interacts with the earth magnetosphere and ionosphere, causing disturbances that create geoelectric fields in the Earth’s surface....
-
Using Longitudinal Fins to Improve the Melting Performance of Stearic Acid in Thermal Energy Storage Devices
The heat transfer efficiency of a thermal energy storage unit (TESU) can be improved by the addition of novel longitudinal fins. A series of TESUs...
-
Effects of Heat Transfer on Laminar-to-Turbulent Transition over a Compressor Blade Operating at Low Reynolds Number
To control the transition process in a laminar separation bubble (LSB) over an ultra-high load compressor blade at a Re of 1.5×10 5 , the effects of...
-
Theoretical deliberations into metallic Sb/GaAs core/shell nanowire as an optical sensor for NO2
The rapid industrialization has had devastating effects on the environment, with industries releasing untreated toxic gases into the atmosphere. To...
