Search
Search Results
-
Organic carbon source controlled microbial olivine dissolution in small-scale flow-through bioreactors, for CO2 removal
The development of carbon dioxide removal methods, coupled with decreased CO 2 emissions, is fundamental to achieving the targets outlined in the...
-
Improving HIC resistance of pipe-steel by Ti/Mg treatment with insights into hydrogen migration
The presence of inclusions in steels is responsible for hydrogen-induced cracking (HIC), which necessitates control over their size and distribution....
-
In situ detection of spatial distribution information of temperature-pH-strain of sandstone cultural relics
To monitor in situ the temperature, pH, and micro-strain change information of sandstone artifacts in the process of oxalic acid corrosion, the...
-
Optimizing the corrosion performance of rust layers: role of Al and Mn in lightweight weathering steel
In this study, the corrosion behavior of AlMn lightweight weathering steel (LWS) in the simulated marine atmosphere was investigated by means of the...
-
Effect of annealing temperature on the structure and dielectric characterization of ITO thin films on a boro-float substrate prepared by radio frequency sputtering
The effect of annealing temperature (T a = 200, 250, and 300 °C) on the structural properties, ac conductivity, and complex dielectric constants (
... 
-
Multi-phase structure and optimal properties of (Ba1-xCax)(Ti0.93Zr0.01Sn0.06)O3 ceramics in the MPB range
(0.93 − x)BT − 0.01BZ − 0.06BS − xCT or (Ba 1-x Ca x )(Ti 0.93 Zr 0.01 Sn 0.06 )O 3 (abbreviated as BCZTS) ceramics were produced using the standard solid-state...
-
Effects of radius and electronegativity of donors on the microstructure and mechanical, thermal, and electrical properties of ZnO varistors
In this paper, influence of radius and electronegativities of seven kinds of donors on the composition, microstructure, mechanical, thermal and...
-
Comparative statistical analysis of pitting in Two 2205 duplex stainless steel variants
The inherent variability of pitting poses challenges in accurately evaluating the pitting resistance due to potential disparities in test results....
-
Corrosion behavior and cellular automata simulation of carbon steel in salt-spray environment
Scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to discuss the corrosion loss and morphology of the pit and rust layer of...
-
Improving the degradation and magnetization performance of FePC amorphous alloys by annealing treatment
The Fe 80 P x C 20- x ingots and amorphous ribbons (4.5 ≤ x ≤ 6.5) are arc melted and melt spun respectively. The Rhodamine B degradation performance of as...
-
Mechanisms and energetics of calcium aluminosilicate glass dissolution through ab initio molecular dynamics-metadynamics simulations
The dissolution of silicate glasses has implications in diverse fields ranging from the immobilization of radioactive waste to the development of...
-
Formation and evolution of secondary phases and surface altered layers during borosilicate glass corrosion in pore water
The emergent secondary phases and surface altered layer (SAL) during the aqueous corrosion of borosilicate glass have a great impact on its chemical...
-
Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film
High-resolution transmission electron microscopy and atom probe tomography are used to characterize the initial passivation and subsequent...
-
Structural, electrical and optical investigation of half doped YTi0.5Mn0.5O3 perovskite compounds for optoelectronic devices
The YTi 0.5 Mn 0.5 O 3 (YTMO) perovskite was synthesized by the conventional solid-state method. The structural, electrical, dielectric and optical...
-
Effect of bias potential and dimension on electrochemical migration of capacitors for implantable devices
Dendrite formation induced by electrochemical migration (ECM) is a common reliability problem occurring on printed circuit boards (PCBs), which...
-
Effects of plasma treatment on biodegradation of natural and synthetic fibers
This study investigates the application of plasma treatment as a means to enhance biodegradation and modify the structural characteristics of fibrous...
-
Electrodeposited graphene/layered double hydroxides micro/nanocontainers for both passive and active corrosion protection
The poor dispersibility of layered double hydroxides (LDHs) is considered to be the main drawback limiting their application in anti-corrosive...
-
Laying the experimental foundation for corrosion inhibitor discovery through machine learning
Creating durable, eco-friendly coatings for long-term corrosion protection requires innovative strategies to streamline design and development...
-
Mechanisms and kinetic model for steel corrosion in unsaturated cementitious materials
Considering the complex coupling of steel corrosion in partially saturated concrete filled with water, the quantitative description of control...
-
Computational demystification of iron carbonyls formation under syngas environment
Iron pentacarbonyl (IPC) gas forms upon the reaction of carbon monoxide with Fe containing metallic surfaces under gas reforming conditions. IPC...
