Skip to main content

3,691 Result(s)

within Fu Zi** Remove this filter Characterization and Evaluation of Materials Remove this filter

Page of 185
and

  1. No Access

    Article

    Microstructure and magnetic properties of FePt thin films for the coating of magnetic force microscopy tips

    L10-FePt thin films with (111)-texture were deposited on Si(100) substrates at various atomic ratios and annealing temperatures to be used as a cover layer for magnetic force microscope (MFM) tips. Their microstr...

    Jie Zhou, Zeyu Han, Xuan Wang, Luran Zhang… in Journal of Materials Science: Materials in… (2024)

  2. No Access

    Article

    Research progress on crosslinked polymer-based dielectrics for thin film capacitors

    Polymer dielectric materials possess advantages of high breakdown strength, low dielectric loss and easily to processing, etc., thus attract wide attention and play a crucial role in modern electronic industry...

    Ming Wang, Hongwei Lu, **gyi Meng, Wanni Fu, Jiaqi Zhang, **ying Liu… in Polymer Bulletin (2024)

  3. No Access

    Article

    Microstructure, Mechanical Properties and Corrosion Resistance of the Mo0.5V0.5NbTiZrx High-Entropy Alloys with Low Thermal Neutron Sections

    High-entropy alloys exhibit significant potential for application in the nuclear industry owing to their exceptional resistance to irradiation, excellent mechanical properties, and corrosion resistance. In thi...

    Chao **ang, En-Hou Han, Zhiming Zhang… in Acta Metallurgica Sinica (English Letters) (2024)

  4. No Access

    Article

    Synthesis, phase structure and dielectric properties of CoTiTa2O8 by molten salt method for LTCC application

    The advancement of low-temperature co-fired ceramic (LTCC) technology has led to increased demands for microwave dielectric ceramics. Among various material systems, the ATiB2O8 (A = Mg2+, Zn2+, Cu2+, Co2+, Ni2+;...

    Liwei Liao, Jun Zuo, Pao Yang, Jiaji Liang… in Journal of Materials Science: Materials in… (2024)

  5. No Access

    Article

    Effect of Isothermal Annealing on the Corrosion Resistance of Detonation Sprayed Fe-Based Amorphous Coatings

    During this study, the effects of isothermal annealing on the corrosion resistance of a detonation sprayed Fe-based amorphous coating were investigated. Microscopic analysis revealed that the Fe-based amorphou...

    Chunling Li, **ngyu Xu, Wangrong Fu… in Journal of Materials Engineering and Perfo… (2024)

  6. No Access

    Article

    Sensitive detection of choline and nicotine in real samples by switching upconversion luminescence

    Nicotine (3-(1-methyl-2-pyrrolidinyl)pyridine) is one of the most common addictive substances, causing the trace detection of nicotine to be very necessary. Herein, we designed and prepared a functionalized na...

    Qichen Su, Jiwei Li, Mengyao Fu, Feifei **ng, Lining Sun in Microchimica Acta (2024)

  7. No Access

    Article

    A new kind of hierarchical porous zirconium phosphonate: preparation and application on oxidation catalysis

    A kind of new zirconium phosphonate material ZrDP with multilevel porous structure and high surface area (about 408.6 m2/g) was synthesized by the reaction between 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrayl-...

    Shan Fu, Yi Tian, **n Long, Qian Shao, Kefeng Wang… in Journal of Porous Materials (2024)

  8. No Access

    Article

    Effects of {10-12} Twin Boundary on Nanotribological Behavior of Pure Mg: A Molecular Dynamics Simulation

    Twinning is a key plastic-deformation mechanism in magnesium (Mg) and Mg alloys. However, the effect of {10-12} twin boundaries on their nanotribological behavior remains unexplored in molecular dynamics (MD) ...

    Bin-Jiang Lv, Fu-Hao Gao, Jun-Jiang Lv in Journal of Materials Engineering and Performance (2024)

  9. No Access

    Article

    Linear and elliptical photogalvanic effects in two-dimensional Be2Al photodetector

    The photogalvanic effect (PGE) enables the generation of photocurrent at zero bias and without the need of building p–n junction, showing potential applications in the low-power two-dimensional optoelectronics. H...

    ** Fu, Guangyao Liang, Jian Lin, Wenhu Liao… in Journal of Materials Science: Materials in… (2024)

  10. No Access

    Article

    Effect of Different Heat Inputs on Impact Performance of AH36 Steel Laser-MAG Hybrid Welded T-Joints

    The T-joints of 6 mm thick AH36 shipbuilding steel were welded using the laser-MAG hybrid welding method. A testing device for the impact performance of shipbuilding steel T-joints was designed, and drop hamme...

    Yan Zhu, Yong Zhao, Juan Fu, Deyang Zhang… in Journal of Materials Engineering and Perfo… (2024)

  11. No Access

    Article

    Effect of Mold Electromagnetic Stirring on Multiphase Flow and Slag Entrainment in a Slab Continuous Casting Mold

    In the current study, a three-dimensional mathematical model was established, integrating with the large eddy simulation (LES) turbulent model, the volume of fluid (VOF) multiphase model, and the magnetohydrod...

    Fu Zheng, Wei Chen, Lifeng Zhang in Metallurgical and Materials Transactions B (2024)

  12. Article

    Open Access

    Nitrogen stable isotope analysis of sulfonamides by derivatization-gas chromatography-isotope ratio mass spectrometry

    The continuous introduction of micropollutants into the environment through livestock farming, agricultural practices, and wastewater treatment is a major concern. Among these pollutants are synthetic sulfonam...

    Qingyuan Dou, Aoife Canavan, Yuhao Fu… in Analytical and Bioanalytical Chemistry (2024)

    Download PDF (957 KB) View Article

  13. No Access

    Article

    Bi-functionalized MCM-41 for heavy metal ions removal: synthesis, enhanced performance and mechanism study

    This work reports the amine and mercapto bi-functionalized mesoporous silica MCM-41 for heavy metal ions removal from aqueous solutions. XRD, FTIR and N2 adsorption–desorption analyses confirmed that a series of ...

    Qingling Liao, Fumin Ma, Yongjun Fu, Wei Feng, Ying Lu in Journal of Porous Materials (2024)

  14. No Access

    Article

    Numerical Analysis of Welding Defects in the Horizontal Position Laser-Metal Inert Gas Hybrid Fillet Welding

    Undercut and hump bead defects are formed when the welding power or welding speed exceeds a certain critical value in horizontal position laser-arc hybrid fillet weld and their physical mechanisms are unclear....

    Yaowei Wang, Wen Liu, Qilong Gong… in Journal of Materials Engineering and Perfo… (2024)

  15. No Access

    Article

    Explicit determination for exact solutions of elastic rectangular beams

    In this paper, a method to directly determine explicit expressions of the exact general solutions for isotropic rectangular beam is provided. If the spanwise variation of the bending moment is smooth, the exac...

    Changwei Tang, Guansuo Dui, Yuyao Fu in International Journal of Mechanics and Mat… (2024)

  16. No Access

    Article

    Ti-Zr-Nb-Ta-Sn Medium-Entropy Alloys with Excellent Properties as Potential Biomaterials

    This study aimed to develop a new alloy for orthopedic implants by combining the concept of medium-entropy alloys (MEAs) with the performance requirements of medical alloys. The effects of Sn on microstructure...

    Dandan Zhu, Shiwen Hu, Guofeng Zhang… in Journal of Materials Engineering and Perfo… (2024)

  17. No Access

    Article

    Broadband, polarization-insensitive and temperature-independent metamaterial absorber based on graphene hybrid water in terahertz domain

    Water and graphene have been used separately to effectively broaden absorption bandwidth in the design of metamaterial absorbers (MAs). In this paper, a broad terahertz MA is presented, in which water and grap...

    Dong Mei Liu, Jian Yun Tu, Duo Lin Wang, Bo Chen… in Optical and Quantum Electronics (2024)

  18. No Access

    Article

    Influence of Molten Pool Flow and Evaporation on the Surface Morphology During Laser Micro-Texture Processing

    In this paper, the finite element model of molten pool flow-evaporation during laser micro-texture processing on metal surfaces was established by COMSOL software. The influence of surface tension, capillary f...

    **n Kuang, Jiangdong Cao, Hao Fu… in Metals and Materials International (2024)

  19. No Access

    Article

    On-Orbit Performance Degradation Prediction and Physical Properties Evaluation of Triple-Junction InGaP2/InGaAs/Ge Solar Cells

    The current work analyzes the on-orbit performance degradation and physical properties of triple-junction InGaP2/InGaAs/Ge solar cells based on the Gaofen-3 (GF-3) satellite in low-earth orbit (LEO) with long-ter...

    Hengkang Qiu, Wenqi Zhao, Wenqiang Wang, Chune Fu… in Journal of Electronic Materials (2024)

  20. No Access

    Article

    Review on Shear Strength and Reliability of Nanoparticle Sintered Joints for Power Electronics Packaging

    The rapid development of the third-generation semiconductors has posed new requirements and challenges for power electronic packaging. In recent years, the utilization of nano-Ag and Cu sintering has emerged a...

    Ze Cui, Qiang Jia, Hongqiang Zhang, Yishu Wang, Limin Ma… in Journal of Electronic Materials (2024)

Page of 185