8,812 Result(s)
within
He** Lin
Materials Science
-
Article
Restraining growth of Zn dendrites by poly dimethyl diallyl ammonium cations in aqueous electrolytes
Metallic zinc is an excellent anode material for Zn-ion batteries, but the growth of Zn dendrite severely hinders its practical application. Herein, an efficient and economical cationic additive, poly dimethyl...
-
Article
Microstructure and room temperature fracture toughness of Nb–Si-based alloys with Sr addition
Nb–Si-based alloys show great potential to surpass the widely used Ni-based superalloys. The element Sr is widely applied in aluminum and magnesium alloys, but reports about the effects of Sr on Nb–Si-based al...
-
Article
TiO2-Fe2TiO5 heterostructure hollow spheres enable high-performance lithium-sulfur batteries via interfacial engineering
The shuttle effect of lithium polysulfides between sulfur cathode and lithium anode is a notorious problem in the commercial application of lithium-sulfur batteries. Herein, heterostructured TiO2-Fe2TiO5 hollow s...
-
Article
Optimizing the Microstructures of Inclined Deposition to Improve the Photoelectric Properties of ZnO Thin Films
Radiofrequency magnetron sputtering has been applied in the deposition of a zinc oxide (ZnO) thin film, which has been used as a next-generation transparent conducting electrode material to replace indium tin ...
-
Article
Experimental and Numerical Investigation of Delamination Between Epoxy Molding Compound (EMC) and Metal in Encapsulated Microelectronic Packages
Microelectronics packages play a vital role in not only interconnecting the electronic signals from the die to the printed circuit board (PCB), but also in protecting the chips during the manufacturing process...
-
Article
Oxidation resistant low-alloyed Ti alloys with good ductility
Oxidation resistance enhancement of pure Ti often comes at the cost of reduced ductility, which is frequently the problem through alloying with sole Al, Si, W, Mo and B. To overcome the short coming of single ...
-
Article
Thermally modulated photoelectronic synaptic behavior in HfS2/VO2 heterostructure
Neuromorphic computing is known for its efficient computational speed, low latency, and reduced power consumption, which is considered a pivotal technology to overcome the von Neumann bottleneck. Artificial sy...
-
Article
Heterogeneous engineering of MnSe@NC@ReS2 core–shell nanowires for advanced sodium-/potassium-ion batteries
Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) have been attracting great attentions and widely been exploited due to the abundant sodium/potassium resources. Hence, the preparation of high-pow...
-
Article
Innovative coaxial high-temperature thin-film sensor with core–shell structure surpassing traditional multilayer films
High-temperature thin-film sensors (TFSs) often suffer from inadequate tolerance to elevated temperatures. In this study, an innovative approach is presented to fabricate in situ integrated TFSs with a core–sh...
-
Article
Exploring the Correlation Between Surface Roughness, Surface Energy, Nano-indentation, Electrical Properties, and Magnetic Characteristics of Annealed Co40Fe40Dy20 Thin Films Deposited on Si(100) Substrates
The impact of film thickness and annealing temperature on the structural, electrical, magnetic, and mechanical properties of cobalt–iron–dysprosium (Co40Fe40Dy20 ) thin films deposited on Si(100) substrates have...
-
Article
A direct polymeric carbon nitride/tungsten oxide Z-scheme heterostructure for efficient photocatalytic hydrogen generation via reforming of plastics into value-added chemicals
To promote charge transfer and separation for efficient photocatalysis, a direct Z-scheme heterostructure was constructed by coupling polymeric carbon nitride (PCN) and WO3. Interestingly, the obtained PCN/WO3 Z-...
-
Article
Preparation of Fe–As alloys by mechanical alloying and vacuum hot-pressed sintering: microstructure evolution, mechanical properties, and mechanisms
Arsenic materials have attracted great attention due to their unique properties. However, research concerning iron–arsenic (Fe–As) alloys is very scarce due to the volatility of As at low temperature and the h...
-
Article
The Effect of Laser Power on Microstructure and Mechanical Properties between Medium Mn Steel and DP980 Joint by Laser Welding
This paper studies the effect of laser power on the microstructure and mechanical properties of medium Mn steel (MMS) and dual-phase (DP980) steel welded joints by laser welding. The microstructure in the weld...
-
Article
Improving energy storage performance of PbZrO3-Al2O3 composite thin films by regulating distribution of Al2O3 nanoparticles
A key factor affecting the energy storage performance of antiferroelectric materials is their electrical breakdown strength. Nanocomposition is one of the effective methods to improve the electrical breakdown ...
-
Article
Effects of Cooling Rate and Ti Content on the Solidification Characteristics of Al-Ti Alloys
In this paper, the solidification characteristics of Al-Ti alloys and the precipitation behavior of Al3Ti phases at different Ti contents and cooling rates were investigated by cooling curve thermal analysis. By ...
-
Article
Open AccessAdvancing electric mobility with lithium-ion batteries: A materials and sustainability perspective
In the last three decades, lithium-ion batteries (LIBs) have become one of the most influential technologies in the world, allowing the widespread adoption of consumer electronics and now electric vehicles (EV...
-
Article
Open AccessEvidence of contact-induced variability in industrially-fabricated highly-scaled MoS2 FETs
Evidence of microscopic inhomogeneities of the side source/drain contacts in 300 mm wafer integrated MoS2 field-effect transistors is presented. In particular, the presence of a limited number of low Schottky bar...
-
Article
Open AccessTransfer learning enables the rapid design of single crystal superalloys with superior creep resistances at ultrahigh temperature
Accelerating the design of Ni-based single crystal (SX) superalloys with superior creep resistance at ultrahigh temperatures is a desirable goal but extremely challenging task. In the present work, a deep tran...
-
Article
Laser additive manufacturing of titanium alloys: process, materials and post-processing
Laser additive manufacturing (LAM) of titanium (Ti) alloys has emerged as a transformative technology with vast potential across multiple industries. To recap the state of the art, Ti alloys processed by two e...
-
Article
Vortex-Inspired Hydrodynamic Drafting Spinning Platform for Large-Scale Preparation of Hydrogel Fibers
Hydrogel fibers have gained considerable attention, but their large-scale production and industrial application are currently constrained. The key lies in precise diameter control and industrial manufacturing ...
