![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
220 Result(s)
-
Article
Open AccessUnraveling dislocation-based strengthening in refractory multi-principal element alloys
Refractory multi-principal element alloys (RMPEAs) draw great interest with their superior mechanical properties and extremely high melting points, yet the strengthening mechanism remains unclear. Here, we cal...
-
Article
A novel AIE-based mitochondria-targeting fluorescent probe for monitoring of the fluctuation of endogenous hypochlorous acid in ferroptosis models
Ferroptosis is a way of cell death mainly due to the imbalance between the production and degradation of lipid reactive oxygen species, which is closely associated with various diseases. Endogenous hypochlorou...
-
Article
Effect of Al on Microstructure and Mechanical Properties of Mg-10Li-3Zn-1Y Alloys
Mg-Li alloys with the nominal composition Mg-10Li-xAl-3Zn-1Y (x = 0 and 3) alloys were prepared by vacuum induction melting. Mg-10Li-3Zn-1Y alloy is mainly composed of α-Mg, β-Li, and Mg24Y5 phases. Adding Al res...
-
Article
Dual-terminal artificial synapse in two-dimensional CrSBr memristor for neuromorphic computing
Novel computing technologies that imitate the principles of biological neural systems may serve low power consumption with significant cognitive and learning advantages. The development of memristors with non-...
-
Article
Interface-constrained catalytic hairpin assembly permits highly sensitive SERS signaling of miRNA
The rapid and precise monitoring of peripheral blood miRNA levels holds paramount importance for disease diagnosis and treatment monitoring. In this study, we propose an innovative research strategy that combi...
-
Article
Room temperature NO2 sensor with rapid recovery based on ZnO/In2O3 heterojunction
Metal oxides have been widely used in gas sensors. Metal oxides have the advantages of low cost, easy preparation and stable performance. However, the disadvantage of their high operating temperature limits th...
-
Article
A novel compressive strength estimation approach for 3D printed fiber-reinforced concrete: integrating machine learning and gene expression programming
3D concrete printing (3DCP) is crucial in the construction because of the low labor cost, eco-friendly behavior; however, getting a proper mixture is always a challenge. This study focuses on predicting the co...
-
Article
A Review of High-Temperature Toughness Improvement Strategies for Medium Entropy Alloys
Since the medium entropy alloy (MEA) was proposed, it has become one of the key areas of material research. Due to the multiple components in the MEA, it has a variety of combinations, and it usually shows hig...
-
Article
Anode characteristics and electrochemical machining of U71Mn alloy in different electrolyte solutions
Electrochemical machining (ECM) is one of the most ideal machining methods for difficult-to-cut material of U71Mn alloy. Therefore, it is vital to obtain the electrochemical characteristics of the material. In...
-
Article
A comparative study of interface characteristics and properties of bronze coatings on steel by plasma arc and cold metal transition deposition
A comparative study of bronze coatings on steel produced by plasma and cold metal transfer wire-arc depositing was carried out. The microstructure, interface characteristics, hardness, and shear bond strength ...
-
Article
Prediction of compressive strength and tensile strain of engineered cementitious composite using machine learning
This research extensively used different progressive machine learning (ML) techniques to predict the compressive strength (CS) and tensile strain (TSt) of engineered cementitious composites (ECC) with 14 input...
-
Article
Study of rhombic star-shaped honeycomb with tunable Poisson’s ratio and elastic modulus properties
This paper presents a novel rhombic star-shaped honeycomb (RSSH) configuration with tunable Poisson's ratio and elastic modulus, and an RSSH with the U-shaped ligaments (URSSH) configuration is generated to an...
-
Article
Microstructure characteristics and hydrogen storage kinetic of nano MgNi-REO alloys
Mg81Ni19-8wt.% REO (oxides of Lanthanum and Cerium) alloys were successfully prepared using mechanical alloying method with Mg-Ni alloy and REO powder. Phase analysis, structural characterization, and microstruct...
-
Article
Microstructural Refinement of Hot-Rolled Steels via Ferrite Dynamic Recovery and Recrystallization
The present study tries to refine the microstructure of hot-rolled C-Mn steels via ferrite dynamic recovery or recrystallization. A total of 1.5 wt.% Al is added to C-Mn steel (1.5Al steel) to retain a certain...
-
Article
A dual-band terahertz metamaterial sensor with high Q-factor and sensitivity
A terahertz metamaterial absorption sensor with polarization insensitivity and dual-band characteristics is designed and analyzed in this paper. The proposed sensor produces two absorption peaks at 0.73 and 2....
-
Article
Investigating the miscibility of poly (butylene adipate-co-terephthalate)/poly (lactic acid) mixtures through multi-scale simulation and experiments
The processability and practical applications of poly (butylene adipate-co-terephthalate) (PBAT) /poly (lactic acid) (PLA) blends are limited due to their lower miscibility. To investigate the miscibility of v...
-
Article
Metal–organic framework modified quasi-solid electrolytes for all-solid lithium batteries
Quasi-solid electrolytes demonstrate advantageous properties such as high flexibility and safety, making them highly applicable in the advancement of solid-state batteries. Nonetheless, their development is hi...
-
Article
Collaborative Enhancement of Ce and Yb Addition to Microstructure and Mechanical Properties of In Situ Al6Si/5TiB2 Metal Matrix Composites
In this work, the effects of combined addition of Ce and Yb on the microstructure and mechanical properties of Al6Si/5TiB2 MMC were systematically investigated by using optical microscopy (OM), x-ray diffraction ...
-
Article
Mn-MOF catalyzed multi-site atom transfer radical polymerization electrochemical sensing of miRNA-21
A green electrochemical biosensor was developed based on metal-organic framework (MOF)-catalyzed atom transfer radical polymerization (ATRP) for quantifying miRNA-21, used as the proof-of-concept analyte. Unl...
-
Article
A Systematic Approach to Model and Optimize Qualities of Castings Produced by Squeeze Casting Process
The present study attempts to promote the quality of squeeze casting components by a two-stage study which includes experimental research of virtual casting based on response surface method (RSM) and experimen...