Abstract
In this chapter, sensing-assisted beamforming in the RIS-enabled ISAC system is studied. In Sect. 5.1, the introduction is first provided. In Sect. 5.2, we study sensing-assisted beamforming in the single-user case and then extend it to the multi-user case in Sect. 5.3. Finally, Sect. 5.4 summarizes this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
For mmWave signals, channel measurement campaigns reveal that signal power of the LoS component is about 13 dB higher than the sum of power of non-line-of-sight (NLoS) components.
- 2.
Although there are some works [4, 5] that considered LoS scenarios and conducted the sensing task at the BS, they can not be applied directly in the considered blind-zone case, where the direct link from the user to the BS is blocked. Hence, we introduce the semi-passive sub-RISs as anchors (positioning reference points), at which the localization task are performed.
- 3.
During the i-th (\(i>1\)) transmission period, the users’ locations estimated in the (\(i-1\))-th transmission period would be used to design the phase shift of the passive sub-RIS in the first time block of the ISAC period.
References
Yu Z, Hu X, Liu C, Peng M, Zhong C (2022) Location sensing and beamforming design for IRSenabled multi-user ISAC systems. IEEE Trans Signal Process 70:5178–5193, https://doi.org/10.1109/TSP.2022.3217353
Hu X, Liu C, Peng M, Zhong C (2023) IRS-based integrated location sensing and communication for mmwave SIMO systems. IEEE Trans Wireless Commun 22(6):4132–4145, https://doi.org/10.1109/TWC.2022.3223428
Wu Q, Zhang R (Nov. 2019) Intelligent reflecting surface enhanced wireless network via joint active and passive beamforming. IEEE Transactions on Wireless Communications 18(11):5394–5409, https://doi.org/10.1109/TWC.2019.2936025
Liu R, Li M, Swindlehurst AL (2022) Joint beamforming and reflection design for RIS-assisted ISAC systems. ar**v:220300265
Jiang ZM, et al. (2022) Intelligent reflecting surface aided dual-function radar and communication system. IEEE Systems Journal 16(1):475–486, https://doi.org/10.1109/JSYST.2021.3057400
Yuan J, Liang YC, Joung J, Feng G, Larsson EG (2021) Intelligent reflecting surface-assisted cognitive radio system. IEEE Trans Commun 69(1):675–687, https://doi.org/10.1109/TCOMM.2020.3033006
Chen X, Zhang Z (2010) Exploiting channel angular domain information for precoder design in distributed antenna systems. IEEE Trans Signal Process 58(11):5791–5801, https://doi.org/10.1109/TSP.2010.2062508
Mühlenbein H (1997) The equation for response to selection and its use for prediction. Evolutionary computation 5(3):303–346
Guo H, Liang YC, Chen J, Larsson EG (2020) Weighted sum-rate maximization for reconfigurable intelligent surface aided wireless networks. IEEE Trans Wireless Commun 19(5):3064–3076, https://doi.org/10.1109/TWC.2020.2970061
Chen W, Ma X, Li Z, Kuang N (2019) Sum-rate maximization for intelligent reflecting surface based terahertz communication systems. In: Proc. 2019 IEEE/CIC Int. Conf. Commun. Workshops China (ICCC Workshops), Changchun, China, pp 153–157, https://doi.org/10.1109/ICCChinaW.2019.8849960
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Hu, X., Liu, C., Peng, M., Zhong, C. (2024). Sensing-Assisted Beamforming in RIS-Enabled ISAC. In: Reconfigurable Intelligent Surface-Enabled Integrated Sensing and Communication in 6G. Wireless Networks. Springer, Singapore. https://doi.org/10.1007/978-981-99-8299-8_5
Download citation
DOI: https://doi.org/10.1007/978-981-99-8299-8_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-8298-1
Online ISBN: 978-981-99-8299-8
eBook Packages: Computer ScienceComputer Science (R0)