Abstract
This article summarizes a simulation campaign to study atmospheric ventilation flow patterns, forces, and stability at various speeds. Simulations are based upon cited experiments, and results show good agreement for global forces, cavity shapes, etc. The hydrofoil deceleration process includes three different flow regimes: fully ventilated flow, fully wetted flow, and partially ventilated flow. To obtain the evolution process of the vortex structure, the vortex structure is visualized using the Omega method. The results show that the evolution of the vortex structure mainly includes three types of vortex structures, i.e., a tip vortex, a Karman vortex, and an unstable vortex. The vortex structure is related to the ventilated cavity. Omega can identify weak vortices and strong vortices.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
A. Acosta, Hydrofoils and hydrofoil craft. Annu. Rev. Fluid Mech. 5, 161–184 (1973)
E.P. Rood Jr, Turning maneuver limitations imposed by sudden strut side ventilation on a 200-Ton 80-Knot Hydrofoil Craft Document No. Number (1975)
A.M. Kozlowska, S. Steen, K. Koushan, Classification of Different Types of Propeller Ventilation and Ventilation Inception Mechanism (Citeseer, 2009)
A. Yousefi, R. Shafaghat, Numerical study of the parameters affecting the formation and growth of ventilation in a surface-piercing propeller. Appl. Ocean Res. 104, 102360 (2020)
C.M. Harwood, K.A. Brucker, F. Miguel, Y.L. Young, S.L. Ceccio, Experimental and numerical investigation of ventilation inception and washout mechanisms of a surface-piercing hydrofoil (2014)
R.S. Rothblum, Investigation of methods of delaying or controlling ventilation on surface piercing struts, University of Leeds (1977)
C. Harwood, F. Miguel Montero, Y.L. Young, S. Ceccio, Experimental Investigation of Ventilation of a Surface Piercing Hydrofoil (2013)
Y.L. Young, C.M. Harwood, F. Miguel Montero, J.C. Ward, S.L. Ceccio, Ventilation of lifting bodies: review of the physics and discussion of scaling effects. Appl. Mech. Rev. 69 (2017)
Y.L. Young, S. Brizzolara, J. Binns, R. Brown, N. Bose, Numerical and physical investigation of a surface-piercing hydrofoil (2013)
C.M. Harwood, Y.L. Young, S.L. Ceccio, Ventilated cavities on a surface-piercing hydrofoil at moderate Froude numbers: cavity formation, elimination, and stability. J. Fluid Mech. 800, 5–56 (2016)
Huang R, Qiu R, Zhi Y, Wang Y (2022) Investigations into the ventilated cavities around a surface-piercing hydrofoil at high Froude numbers. Phys. Fluids 34, 043304 (2022)
Y. Zhi, J. Zhan, R. Huang, R. Qiu, Y. Wang, Numerical investigations into the ventilation elimination mechanism of a surface-piercing hydrofoil. Ocean Eng. 243, 110225 (2022)
Y. Wang, C. Huang, T. Du, R. Huang, Y. Zhi, Y. Wang, Z. **ao, Z. Bian, Research on ventilation and supercavitation mechanism of high-speed surface-piercing hydrofoil. Phys. Fluids 34, 023316 (2022)
K.I. Matveev, M.P. Wheeler, T. **ng, Numerical simulation of air ventilation and its suppression on inclined surface-piercing hydrofoils. Ocean Eng. 175, 251–61 (2019)
Y.-N. Zhang, X.-Y. Wang, C. Liu, Comparisons and analyses of vortex identification between Omega method and Q criterion. J. Hydrodyn. 31, 224–30 (2019)
C. Liu, Y.-S. Gao, X.-R. Dong, Y.-Q. Wang, J.-M. Liu, Y.-N. Zhang, X.-S. Cai, N. Gui, Third generation of vortex identification methods: Omega and Liutex/Rortex based systems. J. Hydrodyn. 31, 205–223 (2019)
Y. Yu, P. Shrestha, O. Alvarez, C. Nottage, C. Liu, Investigation of correlation between vorticity, Q, λci, λ2, Δ and Liutex. Comput. Fluids 225, 104977 (2021)
J. Chen, B. Huang, T. Liu, Y. Wang, G. Wang, Numerical investigation of cavitation-vortex interaction with special emphasis on the multistage shedding process. Appl. Math. Model. 96, 111–30 (2021)
Y.-H. Zhang, X.-J. Hu, W. Lan, Y.-C. Liu, M. Wang, J.-Y. Wang, Application of Omega vortex identification method in cavity buffeting noise. J. Hydrodyn. 33, 259–70 (2021)
Y. Zhi, Z. Zhang, R. Huang, R. Qiu, Y. Wang, Numerical investigations into supercavitating flows and hydrodynamic characteristics of a heaving hydrofoil. Mod. Phys. Lett. B 2150605 (2022)
P.R. Spalart, C.L. Rumsey, Effective inflow conditions for turbulence models in aerodynamic calculations. AIAA J. 45, 2544–53 (2007)
Acknowledgements
This work is accomplished using the code Omega-LiutexUTA, released by Chaoqun Liu at the University of Texas at Arlington. The authors would like to acknowledge gratefully the National Natural Science Foundation of China (No. 52006232, 12122214).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhi, Y., Qiu, R., Huang, R., Wang, Y. (2023). Application of Omega Identification Method in the Ventilated Cavities Around a Surface-piercing Hydrofoil. In: Wang, Y., Gao, Y., Liu, C. (eds) Liutex and Third Generation of Vortex Identification. Springer Proceedings in Physics, vol 288. Springer, Singapore. https://doi.org/10.1007/978-981-19-8955-1_24
Download citation
DOI: https://doi.org/10.1007/978-981-19-8955-1_24
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-8954-4
Online ISBN: 978-981-19-8955-1
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)