Abstract
For the power flow calculation of the DC side traction power supply system for urban rail transportation, the DC traction calculation is carried out first of all, then the mathematical model of each part of the DC side is established to give the equivalent model of the DC traction power supply system, and then the DC power flow calculation method based on Newton–Raphson method is derived. As for software development, using the C# language in the Visual Studio 2013 environment to get the overall design of the software, the software can visualize the modeling and simulation results and finally combine the actual lines to perform the operation of the interface, and display the results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chen J (2018) Key technologies for traction power supply of new generation intelligent urban rail transit. Electr Age 7:72 (in Chinese)
Zhang H, Wang X (2002) Simulation study of DC traction power supply system for urban rail transportation. J Syst Simul 12:1692–1697
Yan F (2017) Design and implementation of the joint simulation software for metro AC–DC power supply network. Bei**g Jiaotong University (in Chinese)
Pires C, Nabeta SI, Cardoso JR (2009) DC traction load flow including AC distribution network. IET Electr Power Appl 3(4):287–298
Zhang J (2017) Modeling and simulation of AC/DC power supply system for urban rail transit based on MATLAB/Simulink. Bei**g Jiaotong University (in Chinese)
Liu Z, Hao F, Zhang G, Chen J, Liu Z (2019) Optimization method of train-ground coordination parameters for urban traction power supply system. J Bei**g Jiaotong Univ 43(01):79–87 (in Chinese)
Lang B, Xu L, **a M, Wu J (2014) Power system analysis. Tsinghua University Press, pp 76–84 (in Chinese)
Panosyan A, Oswald R (2004) Modified Newton-Raphson load-flow analysis for integrated AC/DC power system. In: Proceedings of 39th international university power engineering conference. IEEE Conference Publications, New York, pp 1222–1229
He **ghan, Wang X, Li Z (2016) Power flow algorithm for DC grid considering various control modes. Power Syst Technol 40(3):712–719 (in Chinese)
Acknowledgements
This work is supported by the National Key Research and Development Program (2017YFB1200802-17).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Song, Y., Wu, B., Chen, J., Qiu, R., Liu, Z. (2020). Design and Implementation of Simulation Software of DC Traction Power Supply System for Urban Rail Transportation. In: Qin, Y., Jia, L., Liu, B., Liu, Z., Diao, L., An, M. (eds) Proceedings of the 4th International Conference on Electrical and Information Technologies for Rail Transportation (EITRT) 2019. EITRT 2019. Lecture Notes in Electrical Engineering, vol 639. Springer, Singapore. https://doi.org/10.1007/978-981-15-2866-8_56
Download citation
DOI: https://doi.org/10.1007/978-981-15-2866-8_56
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2865-1
Online ISBN: 978-981-15-2866-8
eBook Packages: EngineeringEngineering (R0)