Abstract
Vacuum insulation panels (VIP) represent a state-of-the-art high-performance thermal insulation solution. The pristine non-aged centre-of-panel thermal conductivity value for a VIP can be as low as 0.002–0.004 W/(mK) depending on the core material. Normally, declared average values accounting for thermal bridge effects and ageing during e.g. 25 years are to be given, typical an effective thermal conductivity value between 0.007 and 0.008 W/(mK) for VIPs with fumed silica cores. VIPs enable highly insulated solutions for building applications, both for the construction of new buildings and for the renovation of existing buildings, and may hence be a measure to reduce the energy usage in buildings without having to employ very thick building envelopes. This study gives a state-of-the-art review of VIP products found available on the market today and explores some of the future research possibilities for these products. The application of nanotechnology is regarded as a promising pathway for achieving and improving both vacuum and non-vacuum based high-performance thermal insulation materials. During the last years, VIPs have been utilized with success for building applications in increasing numbers, where one of the main driving forces is the increased focus on e.g. passive houses, zero energy buildings and zero emission buildings. Thus, VIPs are now in the early market stages as a building product. The implementation of VIPs in various building constructions has lead to an increased interest in the utilization of this product, both in new and refurbished constructions. Even though there is not enough data to conclude the effect over a lifetime of a building yet, the immediate result in decreased energy usage can be seen. However, the challenges of guaranteeing a set of lifetime expectancy, along with high costs, are some of the major reasons why VIPs are met with a certain scepticism in the building industry. Aiming to give better quality assurance for the users, make further advances in VIP envelope technologies and the development of VIP core materials, along with a further cost reduction, represent crucial aspects for VIPs to become a competing thermal insulation solution for buildings.
The original version of this chapter was revised: An error in the production process unfortunately led to publication of this chapter prematurely, before incorporation of the final corrections. The version supplied here has been corrected and approved by the authors. The erratum to this chapter is available at DOI 10.1007/978-3-319-27505-5_18
An erratum to this chapter can be found at http://dx.doi.org/10.1007/978-3-319-27505-5_18
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Aegerter MA, Leventis N, Koebel MM (2011) Aerogels handbook. Springer, Berlin
Alam M, Singh H, Limbachiya MC (2011) Vacuum insulation panels (VIPs) for building construction industry—a review of the contemporary developments and future directions. Appl Energy 88:3592–3602
Alam M, Singh H, Brunner S, Naziris C (2014) Experimental characterisation and evaluation of the thermo-physical properties of expanded perlite—fumed silica composite for effective vacuum insulation panel (VIP) core. Energy Build 69:442–450
Alotaibi SS, Riffat S (2014) Vacuum insulated panels for sustainable buildings: a review of research and applications. Int J Energy Res 38:1–19
Araki K, Kamoto D, Matsuoka S (2009) Optimization about multilayer laminated film and getter device materials of vacuum insulation panel for using at high temperature. J Mater Process Technol 209:271–282
Baetens R (2013) High performance thermal insulation materials for buildings. In: Pacheco-Torgal F, Diamanti MV, Nazari A, Granqvist C-G (eds) Nanotechnology in eco-efficient construction. Woodhead Publishing, Cambridge, pp 188–206
Baetens R, Jelle BP, Thue JV, Tenpierik MJ, Grynning S, Uvsløkk S, Gustavsen A (2010a) Vacuum insulation panels for building applications: a review and beyond. Energy Build 42:147–172
Baetens R, Jelle BP, Gustavsen A (2010b) Phase change materials for building applications: a state-of-the-art review. Energy Build 42:1361–1368
Baetens R, Jelle BP, Gustavsen A, Grynning S (2010c) Gas-filled panels for building applications: a state-of-the-art review. Energy Build 42:1969–1975
Baetens R, Jelle BP, Gustavsen A (2010d) Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review. Sol Energy Mater Sol Cells 94:87–105
Baetens R, Jelle BP, Gustavsen A (2011) Aerogel insulation for building applications: a state-of-the-art review. Energy Build 43:761–769
Berge A, Adl-Zarrabi B (2014) Evaluation of vacuum insulation panels used in hybrid insulation district heating pipes. In: Proceedings of the 14th international symposium on district heating and cooling, Stockholm, Sweden, 7–9 Sept 2014
BINE Informationsdienst (2013) In practice II: new residential and office building. http://www.bine.info/en/publications/themeninfos/publikation/daemmen-durch-vakuum/aus-der-praxis-ii-neubau-wohn-und-geschaeftshaus/. Accessed 31 May 2013. (Originally from Pool Architekten and with photographer Sascha Kletzsch, Germany)
Boafo FE, Chen ZF, Wu WP, Chen Q, Li BB (2013) Ultrafine glass fiber vacuum insulation panel for building insulation. Adv Civ Eng Build Mater
Boafo FE, Chen Z, Li C, Li B, Xu T (2014) Structure of vacuum insulation panel in building system. Energy Build 85:644–653
Bouquerel M, Duforestel T, Baillis D, Rusaouen G (2012a) Heat transfer modeling in vacuum insulation panels containing nanoporous silicas—a review. Energy Build 54:320–336
Bouquerel M, Duforestel T, Baillis D, Rusaouen G (2012b) Mass transfer modeling in gas barrier envelopes for vacuum insulation panels: a review. Energy Build 55:903–920
Brunner S (2009) Quality assurance and declaration of vacuum insulation for building application. In: Proceedings of the 9th international vacuum insulation symposium (IVIS 2009), London, UK, 17–18 Sept 2009
Brunner S, Ghazi Wakili K (2014) Hints for an additional aging factor regarding the thermal performance of vacuum insulation panels with pyrogenic silica core. Vacuum 100:4–6
Brunner S, Simmler H (2008) In situ performance assessment of vacuum insulation panels in a flat roof construction. Vacuum 82:700–707
Brunner S, Gasser P, Simmler H, Ghazi Wakili K (2006) Investigation of multilayered aluminium-coated polymer laminates by focused ion beam (FIB) etching. Surf Coat Technol 200:5908–5914
Brunner S, Stahl T, Ghazi Wakili K (2012a) An example of deteriorated vacuum insulation panels in a building facade. Energy Build 54:278–282
Brunner S, Stahl T, Ghazi Wakili K (2012b) Single and double layered vacuum insulation panels of the same thickness in comparison. In: Proceedings of conference on 3rd building enclosure science and technology (BEST 3—2012), Atlanta, Georgia, USA, 2–4 April 2012
Brunner S, Ghazi Wakili K, Stahl T, Binder B (2014) Vacuum insulation panels for building applications—continuous challenges and developments. Energy Build 85:592–596
Caps R, Fricke J (2000) Thermal conductivity of opacified powder filler materials for vacuum insulation. Int J Thermophys 21:445–452
Caps R, Heinemann U, Ehrmanntraut M, Fricke J (2001) Evacuated insulation panels filled with pyrogenic silica powders: Properties and applications. High Temp High Pressures 33:151–156
Caps R, Beyrichen H, Kraus D, Weismann S (2008) Quality control of vacuum insulation panels: methods of measuring gas pressure. Vacuum 82:691–699
Cuce E, Cuce PM, Wood CJ, Riffat SB (2014) Toward aerogel based thermal superinsulation in buildings: a comprehensive review. Renew Sustain Energy Rev 34:273–299
Demirbas MF (2006) Thermal energy storage and phase change materials: an overview. Energy Sources Part B Econ Plann Policy 1:85–95
Di X, Gao Y, Bao C, Hu Y, **e Z (2013) Optimization of glass fibre based core materials for vacuum insulation panels with laminated aluminium foils as envelopes. Vacuum 97:55–59
Dowson M, Grogan M, Birks T, Harrison D, Craig S (2012) Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying. Appl Energy 97:396–404
Eberle P, Tiwari MK, Maitra T, Poulikakos D (2014) Rational nanostructuring of surfaces for extraordinary icephobicity. Nanoscale 6:4874–4881
EnOB (2013) Vacuum insulation under the spotlight. http://www.enob.info/en/new-technologies/projects/details/vacuum-insulation-under-the-spotlight/. Accessed 03 June 2013
Erb M, Brunner S (2012) Vacuum insulation for building applications. Product declaration and design values. Technical report
Erbenich G (2009) How to identify a high quality VIP. In: Proceedings of the 9th international vacuum insulation symposium (IVIS 2009), London, UK, 17–18 Sept 2009
European Union (2012) Directive 2012/27/EU of the European parliament and of the council of 25 October 2012 on the energy efficiency. Official Journal of the European Union, L 315, vol 55, pp 1–57
Farid MM, Khudhair AM, Razack SAK, Al-Hallaj S (2004) A review on phase change energy storage: materials and applications. Energy Convers Manage 45:1597–1615
Fi-Foil Company (2013) http://www.gfpinsulation.com/. Accessed 08 July 2013
Fricke J, Heinemann U, Ebert HP (2008) Vacuum insulation panels—from research to market. Vacuum 82:680–690
Gao T, Jelle BP (2015) Fiber reinforced hollow silica nanospheres for thermal insulation applications. In: Proceedings of the 12th international vacuum insulation symposium (IVIS 2015), Nan**g, China, 19–21 Sept 2015, pp 31–33
Gao T, Sandberg LIC, Jelle BP, Gustavsen A (2012) Nano insulation materials for energy efficient buildings: a case study on hollow silica nanospheres. In: Mendez-Vilas A (ed) Fuelling the future: advances in science and technologies for energy generation, transmission and storage. BrownWalker Press, Boca Raton, pp 535–539
Gao T, Jelle BP, Sandberg LIC, Gustavsen A (2013) Monodisperse hollow silica nanospheres for nano insulation materials: synthesis, characterization, and life cycle sssessment. ACS Appl Mater Interfaces 5:761–767
Gao T, Sandberg LIC, Jelle BP (2014a) Nano insulation materials: synthesis and life cycle assessment. Proc CIRP 15:490–495
Gao T, Jelle BP, Gustavsen A, Jacobsen S (2014b) Aerogel-incorporated concrete: an experimental study. Constr Build Mater 52:130–136
Ghazi Wakili K, Bundi R, Binder B (2004) Effective thermal conductivity of vacuum insulation panels. Build Res Inf 32:293–299
Ghazi Wakili K, Nussbaumer T, Bundi R (2005) Thermal performance of VIP assemblies in building constructions. In: Proceedings of the 7th international vacuum insulation symposium, Dübendorf, Switzerland, 28–29 Sept 2005, pp 131–138
Ghazi Wakili K, Stahl T, Brunner S (2011) Effective thermal conductivity of a staggered double layer of vacuum insulation panels. Energy Build 43:1241–1246
Ghazi Wakili K, Binder B, Zimmermann M, Tanner Ch (2014) Efficiency verification of a combination of high performance and conventional insulation layers in retrofitting a 130-year old building. Energy Build 82:237–242
Grandcolas M, Etienne G, Tilset BG, Gao T, Sandberg LIC, Gustavsen A, Jelle BP (2013) Hollow silica nanospheres as a superinsulating material. In: Proceedings of the 11th international vacuum insulation symposium (IVIS 2013), Dübendorf, Zürich, Switzerland, 19–20 Sept 2013, pp 43–44
Granqvist C-G (1995) Handbook of inorganic electrochromic materials. Elsevier, Amsterdam
Granqvist C-G (2005) Electrochromic devices. J Eur Ceram Soc 25:2907–2912
Granqvist C-G (2008) Oxide electrochromics: why, how, and whither. Sol Energy Mater Sol Cells 92:203–208
Granqvist C-G (2012) Oxide electrochromics: an introduction to devices and materials. Sol Energy Mater Sol Cells 99:1–13
Grynning S, Jelle BP, Uvsløkk S, Gustavsen A, Baetens R, Caps R, Meløysund V (2011) Hot box investigations and theoretical assessments of miscellaneous vacuum insulation panel configurations in building envelopes. J Build Phys 34:297–324
Haavi T, Jelle BP, Gustavsen A (2012) Vacuum insulation panels in wood frame wall constructions with different stud profiles. J Build Phys 36:212–226
Hasnain SM (1998) Review on sustainable thermal energy storage technologies, part I: heat storage materials and techniques. Energy Convers Manage 39:1127–1138
Heinemann U (2008) Influence of water on the total heat transfer in ‘evacuated’ insulations. Int J Thermophys 29:735–749
Heinemann U, Kastner R (2010) VIP-Prove, Vakuumisolationspaneele - Bewährung in der Baupraxis - wissenschaftliche Begleitforschung. ZAE Bayern, Report ZAE 2 - 1210 - 11, 2010
Hejazi V, Sobolev K, Nosonovsky M (2013) From superhydrophobicity to icephobicity: forces and interaction analysis. Sci Rep 3(2194):1–6
Ibrahim M, Biwole PH, Achard P, Wurtz E (2015) Aerogel-based materials for improving the building envelope’s thermal behavior: a brief review with a focus on a new aerogel-based rendering. In: Sharma A, Kar SK (eds) Energy sustainability through green energy. Springer, Berlin, pp 163–188
Jelle BP (1993) Electrochemical and spectroscopic studies of electrochromic materials. PhD thesis, 1993:131. Department of Applied Electrochemistry, The Norwegian Institute of Technology, Trondheim, Norway
Jelle BP (2011) Traditional, state-of-the-art and future thermal building insulation materials and solutions—properties, requirements and possibilities. Energy Build 43:2549–2563
Jelle BP (2012) Accelerated climate ageing of building materials, components and structures in the laboratory. J Mater Sci 47:6475–6496
Jelle BP (2013a) Solar radiation glazing factors for window panes, glass structures and electrochromic windows in buildings—measurement and calculation. Sol Energy Mater Sol Cells 116:291–323
Jelle BP (2013b) The challenge of removing snow downfall on photovoltaic solar cell roofs in order to maximize solar energy efficiency—research opportunities for the future. Energy Build 67:334–351
Jelle BP (2015) Electrochromic smart windows for dynamic daylight and solar energy control in buildings. In: Mortimer RJ, Rosseinsky DR, Monk PMS (eds) Electrochromic materials and devices. Wiley-VCH, London, pp 419–502
Jelle BP (2016) Building integrated photovoltaics: a concise description of the current state of the art and possible research pathways. Energies 9:1–30, article no. 21
Jelle BP, Breivik C (2012a) State-of-the-art building integrated photovoltaics. Energy Proc 20:68–77
Jelle BP, Breivik C (2012b) The path to the building integrated photovoltaics of tomorrow. Energy Proc 20:78–87
Jelle BP, Hagen G (1993) Transmission spectra of an electrochromic window based on polyaniline, prussian blue and tungsten oxide. J Electrochem Soc 140:3560–3564
Jelle BP, Hagen G (1998) Electrochemical multilayer deposition of polyaniline and prussian blue and their application in solid state electrochromic windows. J Appl Electrochem 28:1061–1065
Jelle BP, Hagen G (1999) Correlation between light absorption and electric charge in solid state electrochromic windows. J Appl Electrochem 29:1103–1110
Jelle BP, Hagen G, Hesjevik SM, Ødegård R (1993) Reduction factor for polyaniline films on ITO from cyclic voltammetry and visible absorption spectra. Electrochim Acta 38:1643–1647
Jelle BP, Hagen G, Birketveit Ø (1998) Transmission properties for individual electrochromic layers in solid state devices based on polyaniline, prussian blue and tungsten oxide. J Appl Electrochem 28:483–489
Jelle BP, Gustavsen A, Nilsen T-N, Jacobsen T (2007) Solar material protection factor (SMPF) and solar skin protection factor (SSPF) for window panes and other glass structures in buildings. Sol Energy Mater Sol Cells 91:342–354
Jelle BP, Gustavsen A, Baetens R (2009) Beyond vacuum insulation panels—how may it be achieved? In: Proceedings of the 9th international vacuum insulation symposium (IVIS 2009), London, UK, 17–18 Sept 2009
Jelle BP, Gustavsen A, Baetens R (2010) The path to the high performance thermal building insulation materials and solutions of tomorrow. J Build Phys 34:99–123
Jelle BP, Tilset BG, Jahren S, Gao T, Gustavsen A (2011) Vacuum and nanotechnologies for the thermal insulation materials of beyond tomorrow—from concept to experimental investigations. In: Proceedings of the 10th international vacuum insulation symposium (IVIS 2011), Ottawa, Canada, 15–16 Sept, pp 171–178
Jelle BP, Hynd A, Gustavsen A, Arasteh D, Goudey H, Hart R (2012a) Fenestration of today and tomorrow: a state-of-the-art review and future research opportunities. Sol Energy Mater Sol Cells 96:1–28
Jelle BP, Breivik C, Røkenes HD (2012b) Building integrated photovoltaic products: A state-of-the-art review and future research opportunities. Sol Energy Mater Sol Cells 100:69–96
Jelle BP, Nilsen T-N, Hovde PJ, Gustavsen A (2012c) Accelerated climate aging of building materials and their characterization by Fourier transform infrared radiation analysis. J Build Phys 36:99–112
Jelle BP, Sveipe E, Wegger E, Uvsløkk S, Grynning S, Thue JV, Time B, Gustavsen A (2013a) Moisture robustness during retrofitting of timber frame walls with vacuum insulation panels: Experimental and theoretical studies. In: de Freitas VP, Delgado JMPQ (eds) Hygrothermal behavior, building pathology and durability. Building pathology and rehabilitation, vol 1. Springer, Berlin, pp 183–210
Jelle BP, Gao T, Tilset BG, Sandberg LIC, Grandcolas M, Simon C, Gustavsen A (2013b) Experimental pathways for achieving superinsulation through nano insulation materials. In: Proceedings of the 11th international vacuum insulation symposium (IVIS 2013), Dübendorf, Zürich, Switzerland, 19–20 Sept, pp 99–100
Jelle BP, Gao T, Sandberg LIC, Tilset BG, Grandcolas M, Gustavsen A (2014a) Thermal superinsulation for building applications—from concepts to experimental investigations. Int J Struct Anal Des 1:43–50
Jelle BP, Sveipe E, Wegger E, Gustavsen A, Grynning S, Thue JV, Time B, Lisø KR (2014b) Robustness classification of materials, assemblies and buildings. J Build Phys 37:213–245
Jelle BP, Kalnæs SE, Gao T (2015a) Low-emissivity materials for building applications: a state-of-the-art review and future research perspectives. Energy Build 96:329–356
Jelle BP, Gao T, Sandberg LIC, Ng S, Tilset BG, Grandcolas M, Gustavsen A (2015b) Development of nano insulation materials for building constructions. In: Proceedings of 5th international symposium on nanotechnology in construction (NICOM5), Chicago, Illinois, USA, 24–26 May, pp 429–434
Jelle BP, Gao T, Mofid SA, Ng S, Tilset BG, Grandcolas M (2015c) Hollow silica nanospheres as a step**-stone toward thermal superinsulation materials. In: Proceedings of the 12th international vacuum insulation symposium (IVIS 2015), Nan**g, China, 19–21 Sept, pp 254–256
Jelle BP, Helgerud SC, Brunner S, Gao T, Rognvik E (2015d) Experimental investigations of vacuum insulation panels in an alkaline environment. In: Proceedings of the 12th international vacuum insulation symposium (IVIS 2015), Nan**g, China, 19–21 Sept, pp 302–306
Jelle BP, Baetens R, Gustavsen A (2015e) Aerogel insulation for building applications. In: Levy D, Zayat M (eds) The sol-gel handbook, vol 3. Wiley-VCH, London, pp 1385–1412
Johansson P (2012) Vacuum insulation panels in buildings, a literature review. Chalmers University of Technology, Göteborg
Johansson P, Geving S, Hagentoft C-E, Jelle BP, Rognvik E, Kalagasidis AS, Time B (2014) Interior insulation retrofit of a historical brick wall using vacuum insulation panels: hygrothermal numerical simulations and laboratory investigations. Build Environ 79:31–45
Jung S, Dorrestijn M, Raps D, Das A, Megaridis CM, Poulikakos D (2011) Are superhydrophobic surfaces best for icephobicity? Langmuir 27:3059–3066
Kaganer MG (1969) Thermal insulation in cryogenic engineering. IPST Press, Jerusalem (Russian version 1966)
Kalnæs SE, Jelle BP (2014) Vacuum insulation panel products: a state-of-the-art review and future research pathways. Appl Energy 116:355–375
Kalnæs SE, Jelle BP (2015) Phase change materials and products for building applications: a state-of-the-art review and future research opportunities. Energy Build 94:150–176
Kevothermal (2011) Vacuum insulation panels in construction, Case study 001. http://www.nanopore.eu/sites/default/files/case_study001_vips_in_flooring.pdf. Accessed 21 Oct 2015
Kevothermal (2012) Vacuum insulation panels in construction, Case study 011. http://www.nanopore.eu/sites/default/files/Case%20study011%20Structural%20Vacuum%20Panel.pdf. Accessed 21 Oct 2015
Khudhair AM, Farid MM (2004) A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Energy Conserv Manage 45:263–275
Kim J, Lee JH, Song TH (2012) Vacuum insulation properties of phenolic foam. Int J Heat Mass Transfer 55:5343–5349
Koebel M, Rigacci A, Achard P (2012) Aerogel-based thermal superinsulation: an overview. J Sol-Gel Sci Technol 63:315–339
Kunic R (2012) Vacuum insulation panels—an assessment of the impact of accelerated ageing on service life. J Mech Eng 58:598–606
Kwon JS, Jung H, Yeo IS, Song TH (2011) Outgassing characteristics of a polycarbonate core material for vacuum insulation panels. Vacuum 85:839–846
Lampert CM (1998) Smart switchable glazing for solar energy and daylight control. Sol Energy Mater Sol Cells 52:207–221
Lampert CM (2004) Chromogenic smart materials. Mater Today 7:28–35
Lee D, Stevens PC, Zeng SQ, Hunt AJ (1995a) Thermal characterization of carbon-opacified silica aerogels. J Non-Cryst Solids 186:285–290
Lee K-H, Kim S-Y, Yoo K-P (1995b) Low-density, hydrophobic aerogels. J Non-Cryst Solids 186:18–22
Lenz K, Leistner Phl, Sedlbauer K, König N (2005) Vakuumisolationspaneele aus hygrothermischer und akusticher sicht. In: VIP-Bau (ed) Proceedings of the 2nd Fachtagung “Erfahrungen aus der Praxis”, Wismar, Germany, 16–17 June, E1–E13
Levy D, Zayat M (eds) (2015) The sol-gel handbook. Wiley-VCH, London
Li H, Chen H, Li X, Duan W (2015) Degradation of VIP barrier envelopes exposed to alkaline solution at different temperatures. Energy Build 93:208–216
Liao Y, Wu X, Liu H, Chen Y (2011) Thermal conductivity of powder silica hollow spheres. Thermochim Acta 526:178–184
MacLean D, Korn J, Mukhopadhyaya P (2011) Vacuum insulation panels (VIPs) arrive in northern Canada. In: Proceedings of the 10th international vacuum insulation symposium (IVIS-X), Ottawa, Ontario, Canada, 15–16 Sept 2011, pp 59–67
Mandilaras I, Atsonios I, Zannis G, Founti M (2014) Thermal performance of a building envelope incorporating ETICS with vacuum insulation panels and EPS. Energy Build 85:654–665
Marouani S (2012) Investigation of the resistance welding of multilayer aluminum-coated polymer complexes used as envelopes of vacuum insulation panels. Mater Des 36:546–556
Maysenhölder W (2008) Sound transmission loss of vacuum insulation panels. Fraunhofer Institute for Building Physics, Stuttgart
Midtdal K, Jelle BP (2013) Self-cleaning glazing products: a state-of-the-art review and future research pathways. Sol Energy Mater Sol Cells 109:126–141
Miesbauer O, Kucukpinar E, Kiese S, Carmi Y, Noller K, Langowski H-C (2014) Studies on the barrier performance and adhesion strength of novel barrier films for vacuum insulation panels. Energy Build 85:597–603
Mukhopadhyaya P, Kumaran K, Normandin N, van Reenen D, Lackey J (2008) High-performance vacuum insulation panel: development of alternative core materials. J Cold Reg Eng 22:103–123
Mukhopadhyaya P, Kumaran K, Normandin N, van Reenen D (2009) Fibre-powder composite as core material for vacuum insulation panels. In: Proceedings of the 9th international vacuum insulation symposium (IVIS-2009), London, UK, 17–18 Sept 2009
Mukhopadhyaya P, Kumaran K, ** F, Normandin N (2011) Use of vacuum insulation panel in building envelope construction: advantages and challenges. In: 13th Canadian conference on building science and technology, Winnipeg, Manitoba, 10–13 May, pp 1–10
Mukhopadhyaya P, MacLean D, Korn J, van Reenen D, Molleti S (2014) Building application and thermal performance of vacuum insulation panels (VIPs) in Canadian subarctic climate. Energy Build 85:672–680
Ng S, Sandberg LIC, Jelle BP (2015a) Insulating and strength properties of an aerogel-incorporated mortar based on UHPC formulations. Key Eng Mater 629–630:43–48
Ng S, Jelle BP, Sandberg LIC, Gao T, Wallevik ÓH (2015b) Experimental investigations of aerogel-incorporated ultra-high performance concrete. Constr Build Mater 77:307–316
Ng S, Jelle BP, Zhen Y, Wallevik ÓH (2016) Effect of storage and curing conditions at elevated temperatures on aerogel-incorporated mortar samples based on UHPC recipe. Constr Build Mater 106:640–649
NRC (2012) Long-term performance of vacuum insulation panels (VIP) in the Canadian climate. http://www.nrc-cnrc.gc.ca/ci-ic/article/v17n3-1. Accessed 04 June 2013
Nussbaumer T, Bundi R, Tanner Ch, Muehlebach H (2005) Thermal analysis of a wooden door system with integrated vacuum insulation panels. Energy Build 37:1107–1113
Nussbaumer T, Ghazi Wakili K, Tanner Ch (2006) Experimental and numerical investigation of the thermal performance of a protected vacuum-insulation system applied to a concrete wall. Appl Energy 83:841–855
Pacheco-Torgal F (2014) Eco-efficient construction and building materials research under the EU framework programme Horizon 2020. Constr Build Mater 51:151–162
Pacheco-Torgal F, Jalali S (2011) Nanotechnology: advantages and drawbacks in the field of construction and building materials. Constr Build Mater 25:582–590
Parekh A, Mattock C (2011) Incorporation of vacuum insulation panels in a wood frame net zero energy home. In: Proceedings of the 10th international vacuum insulation symposium (IVIS-X), Ottawa, Ontario, Canada, 15–16 Sept, pp 46–50
Pei L, Kurumada KI, Tanigaki M, Hiro M, Susa K (2004) Closed-porosity mesoporous silica produced by high temperature rapid drying. J Mater Sci 39:663–665
Pons E, Yrieix B, Heymans L, Dubelley F, Planes E (2014) Permeation of water vapor through high performance laminates for VIPs and physical characterization of sorption and diffusion phenomena. Energy Build 85:604–616
Pool M (2009) Insulation of a mixed use building with 7 storeys in Munich with VIP. In: Proceedings of the 9th international vacuum insulation symposium (IVIS 2009), London, UK, 17–18 Sept 2009
Quenard D (2015a) International Energy Agency (IEA) annex 65 task long-term performance of super-insulating materials in building components and systems, http://www.iea-ebc.org/projects/ongoing-projects/ebc-annex-65/. Accessed 28 July 2015
Quenard D (2015b) International Energy Agency (IEA) annex 65 task long-term performance of super-insulating materials in building components and systems. http://www.enob.info/fileadmin/media/News/Dateien/EBC_Annex_65_Factsheet_X.pdf. Accessed 28 July 2015
Ribeiro AS, Mortimer RJ (2015) Electrochromic polymers. In: Encyclopedia of polymer science and technology. Wiley, London
Sallée H, Quenard D, Valenti E, Galan M (2014) VIP as thermal breaker for internal insulation system. Energy Build 85:631–637
Sandberg LIC, Gao T, Jelle BP, Gustavsen A (2013) Synthesis of hollow silica nanospheres by sacrificial polystyrene templates for thermal insulation applications. Adv Mater Sci Eng 6 (Article ID 483651)
Schutzius TM, Jung S, Maitra T, Eberle P, Antonini C, Stamatopoulos C, Poulikakos D (2015) Physics of icing and rational design of surfaces with extraordinary icephobicity. Langmuir 31:4807–4821
Schwab H, Heinemann U, Beck A, Ebert HP, Fricke J (2005a) Permeation of different gases through foils used as envelopes for vacuum insulation panels. J Thermal Envelope Build Sci 28:293–317
Schwab H, Heinemann U, Beck A, Ebert HP, Fricke J (2005b) Dependence of thermal conductivity on water content in vacuum insulation panels with fumed silica kernels. J Thermal Envelope Build Sci 28:319–326
Schwab H, Heinemann U, Wachtel J, Ebert H-P, Fricke J (2005c) Predictions for the increase in pressure and water content of vacuum insulation panels (VIPs) integrated into building constructions using model calculations. J Thermal Envelope Build Sci 28:327–344
Schwab H, Stark C, Wachtel J, Ebert H-P, Fricke J (2005d) Thermal bridges in vacuum–insulated building facades. J Thermal Envelope Build Sci 28:345–355
Schwab H, Heinemann U, Beck A, Ebert H-P, Fricke J (2005e) Prediction of service life for vacuum insulation panels with fumed silica kernel and foil cover. J Thermal Envelope Build Sci 28:357–374
Simmler H, Brunner S (2005) Vacuum insulation panels for building application: basic properties, aging mechanisms and service life. Energy Build 37:1122–1131
Simmler H, Brunner S, Heinemann U, Schwab H, Kumaran K, Mukhopadhyaya P, Quènard D, Sallèe H, Noller K, Kücküpinar-Niarchos E, Stramm C, Tenpierik M, Cauberg H, Erb M (2005) Vacuum insulation panels. Study on VIP-components and panels for service life prediction in building applications (subtask A). In: HiPTI—High Performance Thermal Insulation, IEA/ECBCS Annex 39, Sept 2005
Smith DM, Maskara A, Boes U (1998) Aerogel-based thermal insulation. J Non-Cryst Solids 225:254–259
SolarArchitetektur (2013) Die Solarsiedlung in Freiburg. http://www.rolfdisch.de/index.php?p=home&pid=78&L=0&host=2#a285. Accessed 08 June 2013
Sprengard C, Holm AH (2014) Numerical examination of thermal bridging effects at the edges of vacuum-insulation-panels (VIP) in various constructions. Energy Build 85:638–643
Stahl Th, Brunner S, Zimmermann M, Ghazi Wakili K (2012) Thermo-hygric properties of a newly developed aerogel based insulation rendering for both exterior and interior applications. Energy Build 44:114–117
Sveipe E, Jelle BP, Wegger E, Uvsløkk S, Grynning S, Thue JV, Time B, Gustavsen A (2011) Improving thermal insulation of timber frame walls by retrofitting with vacuum insulation panels—experimental and theoretical investigations. J Build Phys 35:168–188
Tenpierik MJ (2009) Vacuum insulation panels applied in building constructions (VIP ABC). PhD thesis, Technische Universiteit Delft, Delft, The Netherlands
Tenpierik MJ, Cauberg JJM (2010) Encapsulated vacuuminsulation panels: theoretical thermal optimization. Build Res Inf 38:660–669
Tenpierik MJ, Cauberg JJM, Thorsell TI (2007) Integrating vacuum insulation panels in building constructions: an integral perspective. Constr Innovation 7:38–53
Thorsell TI (2012) Advances in thermal insulation—vacuum insulation panels and thermal efficiency to reduce energy usage in buildings. PhD thesis, KTH—The Royal Institute of Technology, Stockholm, Sweden
Thorsell TI, Källebrink I (2005) Edge loss minimization in vacuum insulation panels. In: Jóhannesson G (ed) Proceedings of the 7th symposium on building physics in the Nordic countries, Reykjavik, Iceland, 13–15 June 2005, vol 2. The Icelandic Building Research Institute, Reykjavik, pp 945–952
va-Q-tec (2013) http://www.va-q-tec.com/va-q-vip_en.html. Accessed 30 May 2013
VIPA (2015) Vacuum insulation panel association. http://vipa-international.com/. Accessed 28 July 2015
VIP-Bau (2013) http://vip-bau.de/d_pages/monitoring/alle_objekte.htm. Accessed 07 June 2013
Voellinger T, Bassi A, Heitel M (2014) Facilitating the incorporation of VIP into precast concrete sandwich panels. Energy Build 85:666–671
Wang X, Walliman N, Ogden R, Kendrick C (2007) VIP and their applications in buildings: a review. Constr Mater 160:145–153
Wegger E, Jelle BP, Sveipe E, Grynning S, Gustavsen A, Baetens R, Thue JV (2011) Aging effects on thermal properties and service life of vacuum insulation panels. J Build Phys 35:128–167
Wong JCH, Kaymak H, Brunner S, Koebel MM (2014) Mechanical properties of monolithic silica aerogels made from polyethoxydisiloxanes. Microporous Mesoporous Mater 183:23–29
Yang CG, Li YJ, Gao X, Xu L (2012) A review of vacuum degradation research and the experimental outgassing research of the core material—PU foam on vacuum insulation panels. Phys Proc 32:239–244
Yrieix B, Morel B, Pons E (2014) VIP service life assessment: Interactions between barrier laminates and core material, and significance of silica core ageing. Energy Build 85:617–630
Zhang P, Lv FY (2015) A review of the recent advances in superhydrophobic surfaces and the emerging energy-related applications. Energy 82:1068–1087
Zimmermann M, Brunner S (2011) VIP market development recommendations based on the SELF experimental building. In: Proceedings of the 10th international vacuum insulation symposium (IVIS-X), Ottawa, Ontario, Canada, 15–16 Sept, pp 122–125
Acknowledgements
This work has been supported by the Research Council of Norway and several partners through The Research Centre on Zero Emission Buildings (ZEB). The authors are grateful for the useful comments from and discussions with Samuel Brunner (Empa, Switzerland), Ulrich Heinemann (ZAE Bayern, Germany) and Daniel Quenard (CSTB, France).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Jelle, B.P., Kalnæs, S.E. (2016). Nanotech Based Vacuum Insulation Panels for Building Applications. In: Pacheco Torgal, F., Buratti, C., Kalaiselvam, S., Granqvist, CG., Ivanov, V. (eds) Nano and Biotech Based Materials for Energy Building Efficiency. Springer, Cham. https://doi.org/10.1007/978-3-319-27505-5_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-27505-5_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-27503-1
Online ISBN: 978-3-319-27505-5
eBook Packages: EnergyEnergy (R0)