Abstract
Intelligent control and human computer interaction is investigated for a powered wheelchair using a simple expert system and ultrasonic sensors. The aim is to make driving easier. Signals from sensors and joysticks are interpreted. The interpreted signals are mixed so that the systems collaborate with the human driver to improve their control over direction and speed. Ultrasonic sensors identify hazards and the system suggests a safer speed and direction. Results are presented from drivers completing a series of timed routes using joysticks to control wheelchairs both with a microcomputer and sensors assisting them and without. Recently published systems are used to contrast and compare results. The new system described in this paper consistently performed better. An additional result appears to be that the amount of support from the microcomputer and sensors should be altered depending on surroundings and situations. The research is part of a bigger research project to improve mobility and enhance the quality of life of disabled powered wheelchair users by increasing their self-reliance and self-confidence.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kawaguchi, A., Noda, Y., Sato, Y., Kondo, Y., Terashima, K.: A mechatronics vision for smart wheelchairs. In: Proceedings of the 4th International Conference on Assistive Technologies, pp. 145–150, April 2008
Leaman, J., La, H.M.: A comprehensive review of smart wheelchairs: past, present, and future. IEEE Trans. Hum.-Mach. Syst. 47(4), 486–499 (2017)
Yukselir, M., Scarrow, K., Wilson, P., Cowan, T.: The brains behind the electric wheelchair, one of Canada’s ‘great artifacts’. The Globe and Mail, 27 August 2012
Carlson, T., Millan, J.D.R.: Brain-controlled wheelchairs: a robotic architecture. IEEE Robot. Auto. Mag. 20, 65–73 (2013)
Joshi, M.K., Gupta, M.V., Gosavi, M.M., Wagh, M.S.: A multifunctional smart wheelchair. Int. J. Adv. Res. Electron. Commun. Eng. 4(5), 1281–1284 (2015)
Sanders, D., Hudson, A.: A specific blackboard expert system to simulate and automate the design of high recirculation airlift reactors. Math. Comput. Simul. 53(1–2), 41–65 (2000)
Sanders, D., Okonor, O., Langner, M., et al.: Using a simple expert system to assist a powered wheelchair user. Advances in Intelligent Systems and Computing, vol. 1037, pp. 662–379. Springer, Heidelberg (2019)
Sanders, D.: Comparing speed to complete progressively more difficult mobile robot paths between human tele-operators and humans with sensor-systems to assist. Assem. Auto 29(3), 230–248 (2009)
Rahiman, M., Zakaria, Z., Rahim, R., et al.: Ultrasonic tomography imaging simulation of two-phase homogeneous flow. Sens. Rev. 29(3), 266–276 (2009)
Sanders, D.: Controlling the direction of “walkie” type forklifts and pallet jacks on slo** ground. Assem. Auto. 28(4), 317–324 (2008)
Sanders, D., Tewkesbury, G., Parchizadeh, H., et al.: Learning to drive with and without intelligent computer systems and sensors to assist. Advances Intelligent Systems Computing, vol. 868, pp. 1171–1181. Springer, Heidelberg (2019)
Sanders, D.A., Gegov, A., Haddad, M., Ikwan, F., Wiltshire, D., Tan, Y.C.: A rule-based expert system to decide on direction and speed of a powered wheelchair. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) IntelliSys 2018. AISC, vol. 868, pp. 822–838. Springer, Cham (2019)
Sanders, D.A., Gegov, A., Tewkesbury, G.E., Khusainov, R.: Sharing driving between a vehicle driver and a sensor system using trust-factors to set control gains. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) IntelliSys 2018. AISC, vol. 868, pp. 1182–1195. Springer, Cham (2019)
Sanders, D.A.: Comparing ability to complete simple tele-operated rescue or maintenance mobile robot tasks with and without a sensor system. Sens. Rev. 30(1), 40–50 (2010)
Sanders, D.A.: Analysis of the effects of time delay on the tele-operation of a mobile robot in various modes of operation. Ind. Robot: Int. J. 36(6), 570–584 (2009)
Stott, I., Sanders, D.: New powered wheelchair systems for the rehabilitation of some severely disabled users. Int. J. Rehabil. Res. 23(3), 149–153 (2000)
Sanders, D., Stott, I.: A new prototype intelligent mobility system to assist powered wheelchair users. Ind. Rob. 26(6), 466–475 (1999)
Sanders, D.A., Baldwin, A.: “X-by-wire technology” Total Vehicle Technology: Challenging current thinking, pp. 3–12 (2001)
Sanders, D., Langner, M., Bausch, N., et al.: Improving human-machine interaction for a powered wheelchair driver by using variable-switches and sensors that reduce wheelchair-veer. Adv. Intell. Syst. Comput. 1038, 1173–1191 (2019)
Sanders, D.A., Tewkesbury, G.E.: A pointer device for TFT display screens that determines position by detecting colours on the display using a colour sensor and an ANN. Displays 30(2), 84–96 (2009)
Sanders, D.A., Urwin-Wright, S.D., Tewkesbury, G.E., et al.: Pointer device for thin-film transistor and cathode ray tube computer screens. Electron. Lett. 41(16), 894–896 (2005)
Stott, I., Sanders, D.: The use of virtual reality to train powered wheelchair users and test new wheelchair systems. Int. J. Rehabil. Res. 23(4), 321–326 (2000)
Goodwin, M.J., Sanders, D.A., Poland, G.A., et al.: Navigational assistance for disabled wheelchair-users. J. Syst. Arch. 43(1–5), 73–79 (1997)
Sanders, D.A.: The modification of pre-planned manipulator paths to improve the gross motions associated with the pick-and-place task. Robotica 13(Part 1), 77–85 (1995)
Larsson, J., Broxvall, M., Saffiotti, A.: Laser-based corridor detection for reactive navigation. Ind. Rob.: Int’. J. 35(1), 69–79 (2008)
Lee, S.: Use of infrared light reflecting landmarks for localization. Ind. Rob. 36(2), 138–145 (2009)
Horn, O., Kreutner, M.: Smart wheelchair perception using odometry, ultrasound sensors, and camera. Robotica 27, 303–310 (2009)
Milanes, V., Naranjo, J.E., Gonzalez, C., et al.: Autonomous vehicle based in cooperative GPS and inertial systems. Robotica 26, 627–633 (2008)
Lim, D., Lee, S., Cho, D.: Design of an assisted GPS receiver and its performance analysis. In: IEEE Symposium on Circulation & Systems, pp. 1742–1745 (2007)
Bloss, R.: Vision and robotics team up at the 2007 show. Ind. Rob.: Int’. J. 35(1), 19–26 (2008)
Sanders, D., Tan, Y., Rogers, I., Tewkesbury, G.: An expert system for automatic design-for-assembly. Assem. Auto. 29(4), 378–388 (2009)
Sanders, D.: Environmental sensors and networks of sensors. Sens. Rev. 28(4), 273–274 (2008)
Hopper, D.: The long perspective for robotic vision. Assemb. Autom. 29(2), 122–126 (2009)
Sanders, D., Lambert, G., Graham-Jones, J., et al.: A robotic welding system using image processing techniques and a CAD model to provide information to a multi-intelligent decision module. Assem. Auto. 30(4), 323–332 (2010)
Sanders, D., Graham-Jones, J., Gegov, A.: Improving ability of tele-operators to complete progressively more difficult mobile robot paths using simple expert systems and ultrasonic sensors. Ind. Rob. Int. J. 37(5), 431–440 (2010)
Sanders, D., Lambert, G., Pevy, L.: Pre-locating corners in images in order to improve the extraction of Fourier descriptors and subsequent recognition of shipbuilding parts. IMechE Part B 223(9), 1217–1223 (2009)
Sanders, D.: Progress in machine intelligence. Ind. Rob. 35(6), 485–487 (2008)
Sanders, D.: Recognizing shipbuilding parts using artificial neural networks and Fourier descriptors. Proc. Inst. Mech. Eng. Part B 223(3), 337–342 (2009)
Sanders, D., Stott, I.: Analysis of failure rates with a tele-operated mobile robot between a human tele-operator and a human with a sensor system to assist. Robotica 30(6), 973–988 (2012)
Sanders, D., Langner, M., Tewkesbury, G.: Improving wheelchair-driving using a sensor system to control wheelchair-veer and variable-switches as an alternative to digital-switches or joysticks. Ind. Rob.: Int. J. 37(2), 157–167 (2010)
Khatib, O.: Real-time obstacle avoidance for manipulators and mobile robots. In: Proceedings of IEEE International Conference on Robotics and Automation, vol. 5, no. 1, pp. 90–98 (1986)
Hudson, A., Sanders, D., Golding, H., et al.: Aspects of an expert design system for the wastewater treatment industry. J. Syst. Archit. 43(1–5), 59–65 (1997)
Sanders, D.: Introducing AI into MEMS can lead us to brain-computer interfaces and super-human intelligence (invited viewpoint review paper) Assemb. Autom. 29(4), 309–312 (2009)
Sanders, D.: Ambient-intelligence, rapid-prototy** and where real people might fit into factories of the future. Assemb. Autom. 29(3), 205–208 (2009)
Sanders, D., Haynes, B., Tewkesbury, G., et al.: The addition of neural networks to the inner feedback path in order to improve on the use of pre-trained feed forward estimators. Math. Comput. Simul. 41(5–6), 461–472 (1996)
Sanders, D.: Perception in robotics. Ind. Rob. 26(2), 90–92 (1999)
Sanders, D.: System Specification 2. Microprocess. Microprogram. 38(1–5), 833–833 (1993)
Sanders, D., Harris, P., Mazharsolook, E.: Image modelling in real-time using spheres and simple polyhedra. In: 4th International Conference on Image Processing and Its Applications, vol. 354, pp. 433–436 (1992)
Sanders, D., Hudson, A., Tewkesbury, G.: Automating the design of high-recirculation airlift reactors using a blackboard framework. Expert Syst. Appl. 18(3), 231–245 (2000)
Sanders, D.: Real time geometric modelling using models in an actuator space and Cartesain space. J. Robot. Syst. 12(1), 19–28 (1995)
Fahimi, F., Nataraj, C., Ashrafiuon, H.: Real-time obstacle avoidance for multiple mobile robots. Robotica 27, 189–198 (2009)
Tewkesbury, G., Sanders, D.: The automatic programming of production machinery for de-flashing plastic parts. In: Advances in Manufacturing Technology VIII, pp. 279–283 (1994)
Tewkesbury, G., Sanders, D.: The use of distributed intelligence within advanced production machinery for design applications. In: Total Vehicle Technology: Challenging Current Thinking, pp. 255–262 (2001)
Sanders, D.A., Robinson, D.C., Hassan, M., Haddad, M., Gegov, A., Ahmed, N.: Making decisions about saving energy in compressed air systems using ambient intelligence and artificial intelligence. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) IntelliSys 2018. AISC, vol. 869, pp. 1229–1236. Springer, Cham (2019)
Sanders, D., Wang, Q., Bausch, N., Huang, Ya., Khaustov, S., Popov, I.: A method to produce minimal real time geometric representations of moving obstacles. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) IntelliSys 2018. AISC, vol. 868, pp. 881–892. Springer, Cham (2019)
Haddad, M., Sanders, D., Gegov, A., et al.: Combining multiple criteria decision making with vector manipulation to decide on the direction for a powered wheelchair. In: Advances Intelligent Systems Computing, vol. 1037, pp. 680–693. Springer, Heidelberg (2019)
Haddad, M., Sanders, D., Bausch, N.: Selecting a robust decision making method to evaluate employee performance. Int. J. Manag. Decis. Making 18(4), 333–351 (2019)
Haddad, M., Sanders, D., Tewkesbury, G.: Selecting a discrete multiple criteria decision making method to decide on a corporate relocation. Arch. Bus. Res. 7(5), 48–67 (2019)
Haddad, M., Sanders, D.: Selecting a best compromise direction for a powered wheelchair using PROMETHEE. IEEE Trans. Neural Syst. Rehabil. Eng. 27(2), 228–235 (2019)
Haddad, M., Sanders, D., Tewkesbury, G., et al.: Initial results from using preference ranking organization METHods for enrichment of evaluations to help steer a powered wheelchair. Adv. Intell. Syst. Comput. 1037, 648–661 (2019)
Haddad, M., Sanders, D., Bausch, N., Tewkesbury, G., Gegov, A., Hassan, M.: Learning to make intelligent decisions using an expert system for the intelligent selection of either PROMETHEE II or the analytical hierarchy process. In: Arai, K., Kapoor, S., Bhatia, R. (eds.) IntelliSys 2018. AISC, vol. 868, pp. 1303–1316. Springer, Cham (2019)
Acknowledgment
Research in this paper was funded by EPSRC grant EP/S005927/1 and supported by The Chailey Heritage Foundation and the University of Portsmouth.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Sanders, D. et al. (2021). Intelligent Control and HCI for a Powered Wheelchair Using a Simple Expert System and Ultrasonic Sensors. In: Arai, K., Kapoor, S., Bhatia, R. (eds) Intelligent Systems and Applications. IntelliSys 2020. Advances in Intelligent Systems and Computing, vol 1252. Springer, Cham. https://doi.org/10.1007/978-3-030-55190-2_42
Download citation
DOI: https://doi.org/10.1007/978-3-030-55190-2_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-55189-6
Online ISBN: 978-3-030-55190-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)