Abstract
Toddlers all over the world are often given toys to teach them, quite early in life, basic assembly skills. Some toys have pegs of different shapes to be inserted in matching openings in a box. Other toys have rings of different diameter, the purpose being to stack and insert them on a post according to size. Such toys help develop the child’s skills and coordination. Naturally, they involve manual dexterity.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Abele, E. (1984) ‘Einsatzmöglichkeiten von flexibel automatisierten Montagesystemen in der industriellen Produktion’, Montagestudie (Vol. 61: Humanisierung des Arbeitslebens), VDI-Verlag, Düsseldorf.
Badalamenti, J. and Bao, H. (1986) ‘Simulation modeling of robotic assembly cell incorporating carousel’, Robotics and Material Flow (ed. S.Y. Nof), Elsevier Science, New York, pp. 121–30.
Bralower, P.M. (1989) ‘Flexible systems aid electronics assembly’, Assembly Engineering, Vol. 32, No. 12, pp. 19–23.
Bright, J.R. (1958) Automation and Management, Harvard Business School, Boston, MA.
Dobrikow, M. (1992) Erfahrungen beim Druckfügen von Aluminiumblech-formteilen in der Serie, Seminarvortrag, Aluminium-Zentrale e.V.
Erhardt, K. (1981) Zeitgemäβe Schraubenpraxis, Uta groebel-infotip, Limeshain.
Erhardt, K.F. (1982) ‘Moderne Montage von Schrauben und Muttern’, Verbindungstechnik, Vol. 14, No. 6, pp. 17–22.
Gießner, F. (1975) Gesetzmäβigkeiten und Konstruktionskataloge elastischer Verbindungen, Braunschweig, Techn. Univ. Diss.
Huber, B. (1991) Hochautomatisierte Recyclinganlagen für Metallfässer — ein Jahrzehnte bewährtes Vorbild künftiger Kreislaufarten 23rd IPA Forschung und Praxis T21, Umweltbewußtes Produzieren, Springer Verlag, Berlin.
Junker, G. (1974a) Grundlagen der Berechnung hochbeanspruchter Schraubverbindungen, VDI-Berichte No. 220, VDI-Verlag, Düsseldorf.
Junker, G. (1974b) ‘Reibung — Störfaktor bei der Schraubmontage’, Verbindungstechnik, Vol. 6, No. 11/12, pp. 25–36.
Kobrow, H. et al. (1990) ‘Teilautomatisierte Demontage von Verbrennungs-motoren’, Fertigungstechnik und Betrieb, Berlin.
Liebig, H.P. (1985) ‘Neue Möglichkeiten des Verbindens von Blechteilen durch Druckfügen’, in Tagungsunterlagen: Zukunftssicherung in der Blechverarbeitung, 7.2.1985, Stuttgart; 13.11.1985, Hagen/Deutsche Forschungs-gesellschaft für Blechverarbeitung e.V., Hannover.
Lotter, B. (1986) ‘Automated assembly in the electrical industry’, Automated Assembly, 2nd edn, Society of Manufacturing Engineers, pp. 49–56.
Muck, G. (1985) Elektronische Messung und Streuung von Drehmomenten in Montagemaschinen, VDI-Berichte No. 323, VDI-Verlag, Düsseldorf.
Nof, S.Y. and Drezner, Z. (1986) ‘Part flow in the robotic assembly plan problem’, Robotics and Material Flow (ed. S.Y. Nof), Elsevier Science, New York, pp. 197–205.
Pfaff, H. and Thomala, W. (1982) ‘Streuung der Vorspannkraft beim Anziehen von Schraubenverbindungen’, VDI-Zeitschrift, Vol. 124, No. 18, pp. 76–84.
Schwartz, W.H. (1988) ‘Electronic assembly systems’, Assembly Engineering, Vol. 31, No. 9, pp. 49–52.
Schweizer, M. (1978) Taktile Sensoren fü r programmierbare Handhabungsgeräte, Springer, Berlin, 1979; Zugl. Stuttgart Univ. Diss.
Spur, G. and Stöfele, Th. (1986) ‘Fügen, Handhaben, Montieren’, Handbuch der Fertigungstechnik, Vol. 5, Carl Hanser Verlag, Munich.
Steinhilper, R. (1988) Produktrecycling im Maschinenbau, Springer, Berlin, 1998; Zugl. Stuttgart Univ. Diss.
Strelow, D. (1981) ‘Reibungszahl und Werkstoffpaarung in der Schraubmontage’, Verbindungstechnik, Vol. 13, No. 6, pp. 19–24.
Truman, R. (1988) ‘Component assembly onto printed circuit board’, International Encyclopedia of Robotics: Applications and Automation (eds R.C. Dorf and S.Y. Nof), Wiley, New York, pp. 202–21.
VDI2243E (1990) Recyclinggerechte Gestaltung technischer Produkte, December 1984 (Vorentwurf zur Neuauflage, May).
VDI 2860 (1990) Montage-und Handhabungstechnik; Handhabungsfunktionen, Handhabungseinrichtungen; Begriffe; Definitionen, Symbole, May.
Warnecke, HJ. and Walther, J. (1984) ‘Automatisches Schrauben mit Industrierobotern’, Zeitschrift für industrielle Fertigung, Vol. 74, No. 3, pp. 137–40.
Westkämper, E. (1977) Automatisierung in der Einzel-und Serienfertigung — Ein Beitrag zur Planung, Entwicklung und Realisierung neuer Fertigungskonzepte, Aachen, RWTH. Diss.
Weule, H. (1983a) Schrauben in der automatisierten Montage, 5th Deutscher Montagekongress, Munich.
Weule, H. (1983b) Schrauben in der automatisierten Montage, VDI-Berichte No. 479, VDI-Verlag, Düsseldorf.
Zimmermann, J. and Hartung, R. (1986) ‘Robotergestützte Instandsetzung von Verbrennungsmotoren’, Fertigungstechnik und Betrieb, Berlin.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1997 Shimon Y. Nof, Wilbert E. Wilhelm and Hans-Jürgen Warnecke
About this chapter
Cite this chapter
Nof, S.Y., Wilhelm, W.E., Warnecke, HJ. (1997). Assembly tasks and technology. In: Industrial Assembly. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-6393-8_2
Download citation
DOI: https://doi.org/10.1007/978-1-4615-6393-8_2
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-7937-9
Online ISBN: 978-1-4615-6393-8
eBook Packages: Springer Book Archive