Abstract
The electron beam is injected from the end of the transport line into the injection section of the storage ring in Taiwan Photon Source (TPS). A girder system for the injection section has been designed to support AC/DC septum magnets, four kicker magnets (K1–K4), and vacuum chambers. The girder system includes three girders, a Rapson-slide mechanism, and stages for the septum/kicker magnets. To improve the reliability and the stability of the injected electron beam, the girder systems are designed and installed in the injection section of TPS, as described in this chapter. The positioning accuracy of installing three girders and the stages for septum/kicker magnet are, respectively, within 0.3 and 0.05 mm.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Liu YH, Yang CS, Hsu KH, Chan CK, Chen CS, Kuo CY, Hsueh HP, Kuan CK (2011) TPS SR Kicker prototype installation status. In: The 2st international particle accelerator conference, San Sebastian, 2011
Blednykh A, Casey B, Dalesio B, Faussete R, Ferreira M, Fliller R, Ganetis G, Heese R, Hseuh H-C, Job PK, Johnson E, Kosciuk B, Kowalski S, Padrazo D, Parker B, Pinayev I, Sharma S, Singh O, Spataro C, Shaftan T, Wang G, Wileke F (2011) Progress with NSLS-II injection straight section design. In: Proceedings of the particle accelerator conference, New York, 2011, pp 2528–2531
Wang GM, Shaftan T, Kramer SL, Fliller R, Guo W, Heese R, Yu LH, Parker B, Willeke FJ (2011) Implementation of a DC Bump at the storage ring injection straight section. In: Proceedings of the particle accelerator conference, New York, 2011, pp 2378–2380
Kempson VC, Dobbing JA, Duller GMA, Hauge N, Hilleke G, Hansen C (2006) Pulsed magnets and pulser units for the booster and storage ring of the diamond light source. In: Proceedings of European particle accelerator conference, Edinburgh, 2006, pp 3341–3343
Huang I, Shin S, Kim M, Kim C, Lee EH, Ha T, Joo Y, Kim S-H, Lee B-J (2012) Injection transient motion at PLS-II. In: Proceedings of the international particle accelerator conference, New Orleans, 2012, pp 688–689
Fukami K, Hesegawa M, Mitsuda C, Nakanishi T, Oishi M, Ohshima T, Shoji M, Soutome K, Yonehara H, Zhang C (2008) Remote tilt-control system of an injection bump magnet in the spring-8 storage ring. In: Proceedings of European particle accelerator conference, Genoa, 2008, pp 2172–2174
Hsu KH, Wu MH, Lai WY, Tsai YL, Liu YH, Yang CS, Chan CK, Chen CS, Tseng TC, Sung PL, Perng SY, Wang HS, Lin CS, Chen ML, Huang DG, Chen JR (2012) Design and diagnostics of a precise 1-Axis goniometer stage for a kicker magnet in the injection section of the TPS storage ring. To be published in Proceedings of 7th MEDSI conference
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media New York
About this paper
Cite this paper
Hsu, KH. et al. (2013). Integration Design and Installation of Girder Systems in the Injection Section of Taiwan Photon Source. In: Juang, J., Huang, YC. (eds) Intelligent Technologies and Engineering Systems. Lecture Notes in Electrical Engineering, vol 234. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-6747-2_102
Download citation
DOI: https://doi.org/10.1007/978-1-4614-6747-2_102
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-6746-5
Online ISBN: 978-1-4614-6747-2
eBook Packages: EngineeringEngineering (R0)