Abstract
Titanium implants are considered the gold standard of treatment for dental and orthopedic applications. Biocompatibility, low elasticity, and corrosion resistance are some of the key properties of these metallic implants. Nonetheless, a long-term clinical failure of implants may occur due to inadequate osseointegration. Poor osseointegration induces mobility, inflammation, increased bone resorption, and osteolysis; hence, it may result in painful revision surgeries. Topographical modifications, improvement in hydrophilicity, and the development of controlled-release drug-loading systems have shown to improve cellular adhesion, proliferation, and differentiation. Surface modifications, along with drug coating, undoubtedly demonstrate better osseointegration, especially in challenged degenerative conditions, such as osteoporosis, osteoarthritis, and osteogenesis imperfecta. Anabolic bone-acting drugs, such as parathyroid hormone peptides, simvastatin, prostaglandin-EP4-receptor antagonist, vitamin D, strontium ranelate, and anti-catabolic bone-acting drugs, such as calcitonin, bisphosphonates, and selective estrogen receptor modulators, expedite the process of osseointegration. In addition, various proteins, peptides, and growth factors may accessorize the idea of localized therapy. Loading these substances on modified titanium surfaces is achieved commonly by mechanisms such as direct coating, adsorption, and incorporating in biodegradable polymers. The primary approach toward the optimum drug loading is a critical trade-off between factors preventing release of a drug immediately and those allowing slow and sustained release. Recent advances broaden the understanding of the efficacy of adsorption, hydrogel coating, and electrospinning layer-by-layer coating facilitated by differential charge on metallic surface. This review discusses the existing approaches and challenges for the development of stable and sustained drug delivery systems on titanium implants, which would promote faster and superior osseointegration.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ainslie KM, Tao SL, Popat KC, Daniels H, Hardev V, Grimes CA, Desai TA (2009) In vitro inflammatory response of nanostructured titania, silicon oxide, and polycaprolactone. J Biomed Mater Res A 91(3):647–655
Al-Enizi A, Zagho M, Elzatahry A (2018) Polymer-based electrospun nanofibers for biomedical applications. Nano 8(4):259
Amor N, Geris L, Vander Sloten J, Van Oosterwyck H (2011) Computational modelling of biomaterial surface interactions with blood platelets and osteoblastic cells for the prediction of contact osteogenesis. Acta Biomater 7(2):779–790
Anselmo AC, Mitragotri S (2014) An overview of clinical and commercial impact of drug delivery systems. J Control Release 190:15–28
Anumolu SS, Singh Y, Gao D, Stein S, Sinko PJ (2009) Design and evaluation of novel fast forming pilocarpine-loaded ocular hydrogels for sustained pharmacological response. J Control Release 137(2):152–159
Ashbaugh AG, Jiang X, Zheng J, Tsai AS, Kim WS, Thompson JM, Thompson JM, Miller RJ, Shahbazian JH, Wang Y, Dillen CA, Ordonez AA, Chang YS, Jain SK, Jones LC, Sterling RS, Mao HQ, Miller LS (2016) Polymeric nanofiber coating with tunable combinatorial antibiotic delivery prevents biofilm-associated infection in vivo. Proc Natl Acad Sci U S A 113(45):E6919–E6928
Aw MS, Addai-Mensah J, Losic D (2012) A multi-drug delivery system with sequential release using titania nanotube arrays. Chem Commun (Camb) 48(27):3348–3350
Azhang H, Suman SR, Christos T, Mathew TM, Cortino S, Alexander LY, Tolou S (2015) Fabrication of drug eluting implants: study of drug release mechanism from titanium dioxide nanotubes. J Phys D Appl Phys 48(27):275401
Barik A, Banerjee S, Dhara S, Chakravorty N (2017) A reductionist approach to extract robust molecular markers from microarray data series – isolating markers to track osseointegration. J Biomed Inform 68:104–111
Bistolfi A, Massazza G, Verné E, Massè A, Deledda D, Ferraris S, Miola M, Galetto F, Crova M (2011) Antibiotic-loaded cement in orthopedic surgery: a review. ISRN Orthop 2011:290851
Bjursten LM, Rasmusson L, Oh S, Smith GC, Brammer KS, ** S (2010) Titanium dioxide nanotubes enhance bone bonding in vivo. J Biomed Mater Res A 92A(3):1218–1224
Bloebaum RD, Bachus KN, Momberger NG, Hofmann AA (1994) Mineral apposition rates of human cancellous bone at the interface of porous coated implants. J Biomed Mater Res 28(5):537–544
Boot W, Gawlitta D, Nikkels PGJ, Pouran B, van Rijen MHP, Dhert WJA, Vogely HC (2017) Hyaluronic acid-based hydrogel coating does not affect bone apposition at the implant surface in a rabbit model. Clin Orthop Relat Res 475(7):1911–1919
Boudou T, Crouzier T, Ren K, Blin G, Picart C (2010) Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications. Adv Mater 22(4):441–467
Brandi ML (2012) Drugs for bone healing. Expert Opin Investig Drugs 21(8):1169–1176
Brånemark R, Brånemark PI, Rydevik B, Myers RR (2001) Osseointegration in skeletal reconstruction and rehabilitation: a review. J Rehabil Res Dev 38:175–181
Buchholz HW, Engelbrecht H (1970) Depot effects of various antibiotics mixed with palacos resins. Chirurg 41(11):511–515
Chan KS, Koike M, Mason RL, Okabe T (2013) Fatigue life of titanium alloys fabricated by additive layer manufacturing techniques for dental implants. Metall Mater Trans 44(2):1010–1022
Chapman MW, Hadley WK (1976) The effect of polymethylmethacrylate and antibiotic combinations on bacterial viability. An in vitro and preliminary in vivo study. Bone Joint Surg Am 58(1):76–81
Concheiro A, Alvarez-Lorenzo C (2013) Chemically cross-linked and grafted cyclodextrin hydrogels: from nanostructures to drug-eluting medical devices. Adv Drug Deliv Rev 65(9):1188–1203
Corobea MS, Albu MG, Ion R, Cimpean A, Miculescu F, Antoniac IV, Raditoiu V, Sirbu I, Stoenescu M, Voicu SI, Ghica MV (2015) Modification of titanium surface with collagen and doxycycline as a new approach in dental implants. J Adhes Sci Technol 29(23):2537–2550
Cortizo MC, Oberti TG, Cortizo MS, Cortizo AM, Fernández Lorenzo de Mele MA (2012) Chlorhexidine delivery system from titanium/polybenzyl acrylate coating: evaluation of cytotoxicity and early bacterial adhesion. J Dent 40(4):329–337
Dahlin RL, Kasper FK, Mikos AG (2011) Polymeric nanofibers in tissue engineering. Tissue Eng Part B Rev 17(5):349–364
Damiati L, Eales MG, Nobbs AH, Su B, Tsimbouri PM, Salmeron-Sanchez M, Dalby MJ (2018) Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants. J Tissue Eng 9:2041731418790694
Davies JE (2003) Understanding peri-implant endosseous healing. J Dent Educ 67(8):932–949
Davies JE, Ajami E, Moineddin R, Mendes VV (2013) The roles of different scale ranges of surface implant topography on the stability of the bone/implant interface. Biomaterials 34(14):3535–3546
Dawes GJ, Fratila-Apachitei LE, Necula BS, Apachitei I, Witkamp GJ, Duszczyk J (2010) Release of PLGA-encapsulated dexamethasone from microsphere loaded porous surfaces. J Mater Sci Mater Med 21(1):215–221
De Giglio E, Trapani A, Cafagna D, Ferretti C, Iatta R, Cometa S, Ceci C, Romanelli A, Mattioli-Belmonte M (2012) Cirpofloxacin-loaded chitosan nanoparticles as titanium coatings: a valuable strategy to prevent implant associated infections. Nano Biomed Eng 4(4):162–168
de Jonge LT, Leeuwenburgh SC, Wolke JG, Jansen JA (2008) Organic-inorganic surface modifications for titanium implant surfaces. Pharm Res 25(10):2357–2369
Dong J, Zhang S, Liu H, Li X, Liu Y, Du Y (2014) Novel alternative therapy for spinal tuberculosis during surgery: reconstructing with anti-tuberculosis bioactivity implants. Expert Opin Drug Deliv 11(3):299–305
Donos N, Hamlet S, Lang NP, Salvi GE, Huynh-Ba G, Bosshardt DD, Ivanovski S (2011) Gene expression profile of osseointegration of a hydrophilic compared with a hydrophobic microrough implant surface. Clin Oral Implants Res 22(4):365–372
Drago L, Boot W, Dimas K, Malizos K, Hänsch GM, Stuyck J, Gawlitta D, Romanò CL (2014) Does implant coating with antibacterial-loaded hydrogel reduce bacterial colonization and biofilm formation in vitro? Clin Orthop Relat Res 472(11):3311–3323
Esposito M, Lausmaa J, Hirsch JM, Thomsen P (1999) Surface analysis of failed oral titanium implants. J Biomed Mater Res 48(4):59–568
Faverani LP, Polo TOB, Ramalho-Ferreira G, Momesso GAC, Hassumi JS, Rossi AC, Freire AR, Prado FB, Luvizuto ER, Gruber R, Okamoto R (2018) Raloxifene but not alendronate can compensate the impaired osseointegration in osteoporotic rats. Clin Oral Investig 22(1):255–265
Ferraris S, Bobbio A, Miola M, Spriano S (2015) Micro- and nano-textured, hydrophilic and bioactive titanium dental implants. Surf Coat Technol 276:374–383
Geuli O, Metoki N, Zada T, Reches M, Eliaz N, Mandler D (2017) Synthesis, coating, and drug-release of hydroxyapatite nanoparticles loaded with antibiotics. J Mater Chem B 5(38):7819–7830
Gittens RA, Olivares-Navarrete R, Schwartz Z, Boyan BD (2014) Implant osseointegration and the role of microroughness and nanostructures: lessons for spine implants. Acta Biomater 10(8):3363–3371
Guillot R, Pignot-Paintrand I, Lavaud J, Decambron A, Bourgeois E, Josserand V, Logeart-Avramoglou D, Viguier E, Picart C (2016) Assessment of a polyelectrolyte multilayer film coating loaded with BMP-2 on titanium and PEEK implants in the rabbit femoral condyle. Acta Biomater 36:310–322
Gulati K, Ramakrishnan S, Aw MS, Atkins GJ, Findlay DM, Losic D (2012) Biocompatible polymer coating of titania nanotube arrays for improved drug elution and osteoblast adhesion. Acta Biomater 8(1):449–456
Hassanin H, Finet L, Cox SC, Jamshidi P, Grover LM, Shepherd DET, Addison O, Attallah MM (2018) Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels. Addit Manuf 20:144–155
Heinl P, Müller L, Körner C, Singer RF, Müller FA (2008) Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater 4(5):1536–1544
Holm NJ, Vejlsgaard R (1976) The in vitro elution of gentamicin sulphate from methylmethacrylate bone cement. A comparative study. Acta Orthop Scand 47(2):44–148
Januario AL, Sallum EA, de Toledo S, Sallum AW, Nociti JF Jr (2001) Effect of calcitonin on bone formation around titanium implant. A histometric study in rabbits. Braz Dent J 12(3):158–162
Javed F, Ahmed HB, Crespi R, Romanos GE (2013) Role of primary stability for successful osseointegration of dental implants: factors of influence and evaluation. Interv Med Appl Sci 5(4):162–167
Kenry, Lim CT (2017) Nanofiber technology: current status and emerging developments. Prog Polym Sci 70:1–17
Ketonis C, Parvizi J, Jones LC (2012) Evolving strategies to prevent implant-associated infections. J Am Acad Orthop Surg 20(7):478–480
Khadka D, Haynie DT (2012) Protein- and peptide-based electrospun nanofibers in medical biomaterials. Nanomedicine 8(8):1242–1262
Khandaker M, Riahinezhad S, Williams WR, Wolf R (2017) Microgroove and collagen-poly(epsilon – caprolactone) nanofiber mesh coating improves the mechanical stability and osseointegration of titanium implants. Nanomaterials (Basel) 7(6):145
Klokkevold PR, Nishimura RD, Adachi M, Caputo A (1997) Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit. Clin Oral Implants Res 8(6):442–447
Kohane DS (2007) Microparticles and nanoparticles for drug delivery. Biotechnol Bioeng 96(2):203–209
Kurtz S, Mowat F, Ong K, Chan N, Lau E, Halpern M (2005) Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002. J Bone Joint Surg Am 87(7):1487–1497
Kyllonen L, D’Este M, Alini M, Eglin D (2015) Local drug delivery for enhancing fracture healing in osteoporotic bone. Acta Biomater 11:412–434
Lai K, ** Y, Miao X, Jiang Z, Wang Y, Wang H, Yang G (2017) PTH coatings on titanium surfaces improved osteogenic integration by increasing expression levels of BMP-2/Runx2/Osterix. RSC Adv 7(89):56256–56265
Le Guehennec L, Soueidan A, Layrolle P, Amouriq Y (2007) Surface treatments of titanium dental implants for rapid osseointegration. Dent Mater 23(7):844–854
Li YJ, Lu CC (2015) A novel scheme and evaluations on a long-term and continuous biosensor platform integrated with a dental implant fixture and its prosthetic abutment. Sensors (Basel) 15(10):24961–24976
Li LH, Kong YM, Kim HW, Kim YW, Kim HE, Heo SJ, Koak JY (2004) Improved biological performance of Ti implants due to surface modification by micro-arc oxidation. Biomaterials 25(14):2867–2875
Li Y, Li X, Song G, Chen K, Yin G, Hu J (2012a) Effects of strontium ranelate on osseointegration of titanium implant in osteoporotic rats. Clin Oral Implants Res 23(9):1038–1044
Li LL, Wang LM, Xu Y, Lv LX (2012b) Preparation of gentamicin-loaded electrospun coating on titanium implants and a study of their properties in vitro. Arch Orthop Trauma Surg 132(6):897–903
Li D, Lv P, Fan L, Huang Y, Yang F, Mei X, Wu D (2017) The immobilization of antibiotic-loaded polymeric coatings on osteoarticular Ti implants for the prevention of bone infections. Biomater Sci 5(11):2337–2346
Liang J, Xu S, Shen M, Cheng B, Li Y, Liu X, Qin D, Bellare A, Kong L (2017) Osteogenic activity of titanium surfaces with hierarchical micro−/nano-structures obtained by hydrofluoric acid treatment. Int J Nanomedicine 12:1317–1328
Lopez-Heredia MA, Goyenvalle E, Aguado E, Pilet P, Leroux C, Dorget M, Weis P, Layrolle P (2008) Bone growth in rapid prototyped porous titanium implants. J Biomed Mater Res A 85(3):664–673
Maïmoun L, Brennan TC, Badoud I, Dubois-Ferriere V, Rizzoli R, Ammann P (2010) Strontium ranelate improves implant osseointegration. Bone 46(5):1436–1441
Mandracci P, Mussano F, Rivolo P, Carossa S (2016) Surface treatments and functional coatings for biocompatibility improvement and bacterial adhesion reduction in dental implantology. Coatings 6(1):7
Marks KE, Nelson CL, Lautenschlager EP (1976) Antibiotic-impregnated acrylic bone cement. J Bone Joint Surg Am 58(3):358–364
Masri BA, Duncan CP, Beauchamp CP (1998) Long-term elution of antibiotics from bone-cement: an in vivo study using the prosthesis of antibiotic-loaded acrylic cement (PROSTALAC) system. J Arthroplasty 13(3):331–338
Meunier PJ, Roux C, Seeman E, Ortolani S, Badurski JE, Spector TD, Cannata J, Balogh A, Lemmel EM, Pors-Nielsen S, Rizzoli R, Genant HK, Reginster JY (2004) The effects of strontium ranelate on the risk of vertebral fracture in women with postmenopausal osteoporosis. N Engl J Med 350(5):459–468
Migliaccio S, Brama M, Spera G (2007) The differential effects of bisphosphonates, SERMS (selective estrogen receptor modulators), and parathyroid hormone on bone remodeling in osteoporosis. Clin Interv Aging 2(1):55–64
Mombelli A, van Oosten MA, Schürch E Jr, Lang NP (1987) The microbiota associated with successful or failing osseointegrated titanium implants. Oral Microbiol Immunol 2(4):145–151
Moreno-Vega AI, Gómez-Quintero T, Nuñez-Anita RE, Acosta-Torres LS, Castaño V (2012) Polymeric and ceramic nanoparticles in biomedical applications. J Nanotechnol 2012:10
Nerantzaki M, Skoufa E, Adam KV, Nanaki S, Avgeropoulos A, Kostoglou M, Bikiaris D (2018) Amphiphilic block copolymer microspheres derived from castor oil, poly(ε-carpolactone), and poly(ethylene glycol): preparation, characterization and application in naltrexone drug delivery. Materials (Basel) 11(10). https://doi.org/10.3390/ma11101996
Otsuki B, Takemoto M, Fujibayashi S, Neo M, Kokubo T, Nakamura T (2006) Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three imensional micro-CT based structural analyses of porous bioactive titanium implants. Biomaterials 27(35):5892–5900
Pan C, Zhou Z, Yu X (2018) Coatings as the useful drug delivery system for the prevention of implant-related infections. J Orthop Surg Res 13(1):220
Park YS, Cho JY, Lee SJ, Hwang CI (2014) Modified titanium implant as a gateway to the human body: the implant mediated drug delivery system. Biomed Res Int 2014:801358
Pokrowiecki R (2018) The paradigm shift for drug delivery systems for oral and maxillofacial implants. Drug Deliv 25(1):1504–1515
Poth N, Seiffart V, Gross G, Menzel H, Dempwolf W (2015) Biodegradable chitosan nanoparticle coatings on titanium for the delivery of BMP-2. Biomol Ther 5(1):3–19
Qayoom I, Raina DB, Širka A, Tarasevičius Š, Tägil M, Kumar A, Lidgren L (2018) Anabolic and antiresorptive actions of locally delivered bisphosphonates for bone repair. Bone Joint Res 7(10):548–560
Qian X, Qing F, Jun O, Hong S (2014) Construction of drug-loaded titanium implants via layer-by-layer electrostatic self-assembly. Hua ** Kou Qiang Yi Xue Za Zhi 32(6):537–541. (Article in Chinese)
Rams TE, Roberts TW, Tatum H, Keyes PH (1984) The subgingival microbial flora associated with human dental implants. J Prosthet Dent 51(4):529–534
Ribeiro M, Monteiro FJ, Ferraz MP (2012) Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions. Biomatter 2(4):176–194
Romano CL, Scarponi S, Gallazzi E, Romano D, Drago L (2015) Antibacterial coating of implants in orthopaedics and trauma: a classification proposal in an evolving panorama. J Orthop Surg Res 10:157
Sadri M, Pashmfroosh N, Samadieh S (2017) Implants modified with polymeric nanofibers coating containing the antibiotic vancomycin. Nanomed Res J 2(4):208–215
Salou L, Hoornaert A, Louarn G, Layrolle P (2015) Enhanced osseointegration of titanium implants with nanostructured surfaces: an experimental study in rabbits. Acta Biomater 11:494–502
Santos MCLG, Campos MIG, Line SRP (2002) Early dental implant failure: a review of the literature. Braz J Oral Sci 1:103–111
Santos A, Sinn Aw M, Bariana M, Kumeria T, Wang Y, Losic D (2014) Drug-releasing implants: current progress, challenges and perspectives. J Mater Chem B 2(37):6157–6182
Shah FA, Trobos M, Thomsen P, Palmquist A (2016) Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants – is one truly better than the other? Mater Sci Eng C 62:960–966
Shi Q, Qian Z, Liu D, Liu H (2017) Surface modification of dental titanium implant by layer-by-layer electrostatic self-assembly. Front Physiol 8:574–574
Shibamoto A, Ogawa T, Duyck J, Vandamme K, Naert I, Sasaki K (2018) Effect of high frequency loading and parathyroid hormone administration on peri-implant bone healing and osseointegration. Int J Oral Sci 10(1):6
Shu Y, Ou G, Wang L, Zou J, Li Q (2011) Surface modification of titanium with heparin-chitosan multilayers via layer-by-layer self-assembly technique. J Nanomater 2011:8
Sirivisoot S, Pareta R, Webster TJ (2011) Electrically controlled drug release from nanostructured polypyrrole coated on titanium. Nanotechnology 22(8):085101
Slaets E, Carmeliet G, Naert I, Duyck J (2007) Early trabecular bone healing around titanium implants: a histologic study in rabbits. J Periodontol 78(3):510–517
Son JS, Choi YA, Park EK, Kwon TY, Kim KH, Lee KB (2013) Drug delivery from hydroxyapatite-coated titanium surfaces using biodegradable particle carriers. J Biomed Mater Res B Appl Biomater 101B(2):247–257
Song W, Seta J, Chen L, Bergum C, Zhou Z, Kanneganti P, Kast RE, Auner GW, Shen M, Markel DC, Ren W, Yu X (2017) Doxycycline-loaded coaxial nanofiber coating of titanium implants enhances osseointegration and inhibits Staphylococcus aureus infection. Biomed Mater 12(4):045008
Sosnik A, Seremeta K (2017) Polymeric hydrogels as technology platform for drug delivery applications. Gels 3(3):25
Staruch R, Griffin MF, Butler P (2016) Nanoscale surface modifications of orthopaedic implants: state of the art and perspectives. Open Orthop J 10:920–938
Steffi C, Shi Z, Kong CH, Wang W (2017) In vitro findings of titanium functionalized with estradiol via polydopamine adlayer. J Funct Biomater 8(4):45
Stigter M, Bezemer J, de Groot K, Layrolle P (2004) Incorporation of different antibiotics into carbonated hydroxyapatite coatings on titanium implants, release and antibiotic efficacy. J Control Release 99(1):127–137
Suzuki T, Ryu K, Kojima K, Saito S, Nagaoka H, Tokuhashi Y (2017) Teriparatide treatment improved loosening of cementless total knee arthroplasty: a case report. J Orthop Case Rep 7(1):32–35
Suzuki T, Sukezaki F, Shibuki T, Toyoshima Y, Nagai T, Inagaki K (2018) Teriparatide administration increases periprosthetic bone mineral density after total knee arthroplasty: a prospective study. J Arthroplast 33(1):79–85
Tıraş MB, Noyan V, Yıldız A, Yıldırım M, Daya S (2000) Effects of alendronate and hormone replacement therapy, alone or in combination, on bone mass in postmenopausal women with osteoporosis: a prospective, randomized study. Hum Reprod 15(10):2087–2092
Tobin EJ (2017) Recent coating developments for combination devices in orthopedic and dental applications: a literature review. Adv Drug Deliv Rev 112:88–100
Vasconcellos LMR, Oliveira MV, Graça MLA, Vasconcellos LGO, Cairo CAA, Carvalho YR (2008) Design of dental implants, influence on the osteogenesis and fixation. J Mater Sci Mater Med 19(8):2851–2857
Virdi AS, Irish J, Sena K, Liu M, Ke H, McNulty M, Sumner DR (2015) Sclerostin antibody treatment improves implant fixation in a model of severe osteoporosis. J Bone Joint Surg Am 97(2):133–140
Wang D, Liu Q, **ao D, Guo T, Ma Y, Duan K, Wang J, Lu X, Feng B, Weng J (2015) Microparticle entrapment for drug release from porous-surfaced bone implants. J Microencapsul 32(5):443–449
Wang Q, Huang JY, Li HQ, Chen Z, Zhao AZ, Wang Y, Zhang KQ, Sun HT, Al-Deyab SS, Lai YK (2016) TiO2 nanotube platforms for smart drug delivery: a review. Int J Nanomedicine 11:4819–4834
Wang T, Weng Z, Liu X, Yeung KWK, Pan H, Wu S (2017) Controlled release and biocompatibility of polymer/titania nanotube array system on titanium implants. Bioact Mater 2(1):44–50
Wei Q, Becherer T, Angioletti-Uberti S, Dzubiella J, Wischke C, Neffe AT, Lendlein A, Ballauff M, Haag R (2014) Protein interactions with polymer coatings and biomaterials. Angew Chem Int Ed Engl 53(31):8004–8031
**ao D, Liu Q, Wang D, **e T, Guo T, Duan K, Weng J (2014) Room temperature attachment of PLGA microspheres to titanium surfaces for implant-based drug release. Appl Surf Sci 309:112–118
**e Y, Li J, Yu ZM, Wei Q (2017) Nano modified SLA process for titanium implants. Mater Lett 186:38–41
Yamaki K, Kataoka Y, Ohtsuka F, Miyazaki T (2012) Micro-CT evaluation of in vivo osteogenesis at implants processed by wire-type electric discharge machining. Dent Mater J 31(3):427–432
Zemtsova EG, Arbenin AY, Valiev RZ, Smirnov VM (2018) Improvement of the mechanical and biomedical properties of implants via the production of nanocomposite based on nanostructured titanium matrix and bioactive nanocoating. In: Anisimov K et al (eds) Proceedings of the scientific-practical conference ‘Research and Development – 2016’. Springer, Cham
Zhang L, Yan J, Yin Z, Tang C, Guo Y, Li D, Wei B, Xu Y, Gu Q, Wang L (2014) Electrospun vancomycin-loaded coating on titanium implants for the prevention of implant-associated infections. Int J Nanomedicine 9:3027–3036
Zhao P, Liu H, Deng H, **ao L, Qin C, Du Y, Shi X (2014) A study of chitosan hydrogel with embedded mesoporous silica nanoparticles loaded by ibuprofen as a dual stimuli-responsive drug release system for surface coating of titanium implants. Colloids Surf B Biointerfaces 123:657–663
Conflicts of Interest
The authors declare that they have no conflicts of interest in relation to this article.
Ethical Approval
This review article does not contain any studies with human participants or animals performed by any of the authors.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Barik, A., Chakravorty, N. (2019). Targeted Drug Delivery from Titanium Implants: A Review of Challenges and Approaches. In: Pokorski, M. (eds) Trends in Biomedical Research. Advances in Experimental Medicine and Biology(), vol 1251. Springer, Cham. https://doi.org/10.1007/5584_2019_447
Download citation
DOI: https://doi.org/10.1007/5584_2019_447
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41218-0
Online ISBN: 978-3-030-41219-7
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)