Abstract
Polymer composite materials based on Fenilon S-2 (FS-2) heat-resistant aromatic polyamide and filled with microcapsules containing a lubricating material were developed and used for tribological purposes. FS-2 acts both as a matrix and as a material of microcapsule shells. The choice of oils suitable for preparing the composite is limited and is determined by the capability of oils to preserve lubricating properties at high temperatures of FS-2 forming, up to 320°С. The tribotechnical and physicomechanical tests of the developed composites containing microcapsules demonstrated significant improvement of the tribological characteristics of the materials relative to the initial polymer. The polymer composites filled with microcapsules form an oriented lubricating film on the friction surfaces; this film is retained under high loads for a long time.
Similar content being viewed by others
References
Twist, C.P., Seyam, A.M., Chen, C., Kim, M.-G., Weberski, M.P., Jr., Ren, N., Marks, T.J., Chung, Y.-W., and Wang, Q.J., Adv. Eng. Mater., 2012, vol. 14, pp. 101–105.
Chang, L. and Friedrich, K., Tribol. Int., 2010, vol. 43, no. 12, pp. 2355–2364.
Kolesnikov, V.I., Ivanochkin, P.G., Myasnikova, N.A., Danilchenko, S.A., and Myasnikov, F.V., in Proc. 2016 Int. Conf. on Physics and Mechanics of New Materials and Their Applications, New York: Nova Science, 2017, pp. 121–131.
Myasnikova, N.A., Sidashov, A.V., and Myasnikov, Ph.V., Mater. Sci. Forum, 2016, vol. 870, pp. 303–308.
Functional Coatings: by Polymer Microencapsulation, Ghosh., S.K., Ed., Weinheim, 2006.
Jyothi, S.S., Seethadevi, A., Prabha, K.S., Muthuprasanna, P., and Pavitra, P., Int. J. Pharma BioSci., 2012, vol. 3, no. 1, pp. 509–531.
Nakagawa, K., Iwamoto, S., Nakajima, M., Shono, A., and Satoh, K., J. Colloid Interface Sci., 2004, vol. 278, no. 1, pp. 198–205.
Freitas, S., Merkle, H.P., and Gander, B., J. Control. Release, 2005, vol. 102, pp. 313–332.
Derlugyan, P.D., Shcherbakov, I.N., Ivanov, V.V., Loginov, V.T., Trofimov, G.E., and Derlugyan, F.P., Khimicheskoe nanokonstruirovanie kompozitsionnykh materialov i pokrytii s antifriktsionnymi svoistvami: Monografiya (Chemical Nanoconstruction of Composite Materials and Coatings with Antifriction Properties: Monograph), Rostov-on-Don: Yuzhnoross. Gos. Tekh. Univ., 2011.
Essawy, H. and Tauer, K., Colloid Polym. Sci., 2010, vol. 288, pp. 317–331.
Bardushkin, V.V., Sorokin, A.I., and Sychev, A.P., Tren. Smazka Mash. Mekh., 2015, no. 10, pp. 43–47.
Kolesnikov, I.V., Bardushkin, V.V., and Myasnikov, Ph.V., J. Theor. Appl. Mech. (Sofia), 2017, vol. 47, no. 4, pp. 37–47.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.I. Kolesnikov, N.A. Myasnikova, F.V. Myasnikov, M.V. Boiko, E.S. Novikov, V.V. Avilov, 2018, published in Zhurnal Prikladnoi Khimii, 2018, Vol. 91, No. 10, pp. 1420−1430.
Rights and permissions
About this article
Cite this article
Kolesnikov, V.I., Myasnikova, N.A., Myasnikov, F.V. et al. Physicomechanical and Tribological Properties of Polymer Composites Filled with Lubricant-Containing Microcapsules. Russ J Appl Chem 91, 1617–1625 (2018). https://doi.org/10.1134/S1070427218100087
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427218100087