Abstract
A mathematical model of damped flexural–torsional vibrations of monoclinic composite strip of constant-length rectangular cross section is proposed. The model is based on the refined Timoshenko beam-bending theory, the theory of generalized Voigt–Lekhnitskii torsion, and the elastic–viscoelastic correspondence principle in the linear theory of viscoelasticity. A two-stage method for solving a coupled system of differential equations is developed. First, using the Laplace transform in spatial variable, real natural frequencies and natural forms are found. To determine the complex natural frequencies of the strip, the found real values are used as their initial values of natural frequencies, and then the complex frequencies are calculated by the method of third-order iterations. An assessment is given of the reliability of the mathematical model and method of numerical solution performed by comparing calculated and experimental values of natural frequencies and loss factors. The results of a numerical study of the effect of angles of orientation of reinforcing fibers and lengths by the values of natural frequencies and loss factors for free–free and cantilever monoclinic stripes are discussed. It is shown that, for the free–free strip, the region of mutual transformation eigenmodes of coupled vibration modes arise for quasi-bending and -twisting vibrations of either even or odd tones. In the cantilever strip of the region of mutual transformation of eigenforms of coupled modes, vibrations occur for both even and odd tones.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
S. Daynes and P. M. Weaver, “Stiffness tailoring using prestress in adaptive composite structures,” Compos. Struct. 106, 282–287 (2013).
G. A. Georghiades and J. R. Banerjee, “A parametric investigation into the flutter characteristics of composite wings,” in Proc. AIAA/ASME/ASCE/AHS/ASC 37th Structures, Structural Dynamics and Materials Conference, Salt Lake City, Ut., Apr. 15–17, 1996 (American Inst. of Aeronautics and Astronautucs, Reston, Va., 1996), Vol. 1, pp. 300–310.
K. Hayat, A. G. M. de Lecea, C. D. Moriones, and S. K. Ha, “Flutter performance of bend-twist coupled large-scale wind turbine blades,” J. Sound Vib. 370, 149–162 (2016).
W. Li, H. Zhou, H. Liu, Y. Lin, and Q. Xu, “Review on the blade design technologies of tidal current turbine,” Renewable Sustainable Energy Rev. 63, 414–422 (2016).
A. Azzam and W. Li, “Theoretical and experimental methods on bend-twist coupling and dam** properties with the relationship to lay-up of the composite propeller marine: A review,” Int. J. Eng. Sci. Technol. 4, 2907–2917 (2012).
P. J. Maljaars and M. L. Kaminski, “Hydro-elastic analysis of flexible propellers: An overview,” in Proc. 4th Int. Symp. on Marine Propulsors, Austin, Tex., May 31 — June 4, 2015 (Ocean Engineering Group, Univ. of Texas, Austin, Tex., 2015).
V. M. Ryabov and B. A. Yartsev, “An iterative method for determining elastic and dissipative characteristics of polymer composite materials. Part I. Theoretical foundations,” Vopr. Materialoved., No. 2 (22), 55–61 (2000).
V. M. Ryabov and B. A. Yartsev, “An iterative method for determining elastic and dissipative characteristics of polymer composite materials. Part II. Minimization of experimental errors,” Vopr. Materialoved., No. 2 (22), 61–70 (2000).
V. M. Ryabov and B. A. Yartsev, “An iterative method for determining elastic and dissipative characteristics of polymer composite materials. Part III. Experimental verification,” Vopr. Materialoved., No. 2 (22), 70–78 (2000).
R. V. Abarcar and P. E. Cuniff, “The vibration of cantilever beams of fibre-reinforced material,” J. Compos. Mater. 6, 504–517 (1972).
I. G. Ritchie, H. E. Rosinger, and W. H. Fleury, “The dynamic elastic behavior of a fibre-reinforced composite sheet: II. The transfer matrix calculation of the resonant frequencies and vibration shapes,” J. Phys. D: Appl. Phys. 8, 1750–1786 (1975).
A. K. Miller and D. F. Adams, “An analytic means of determining the flexural and torsional resonant frequencies of generally orthotropic beams,” J. Sound Vib. 41, 433–449 (1975).
J. K. Suresh and C. Venkastensan, “Structural dynamic analysis of composite beams,” J. Sound Vib. 143, 503–519 (1990).
J. Li, S. Wang, X. Li, X. Kong, and W. Wu, “Modeling the coupled bending–torsional vibrations of symmetric laminated composite beams,” Arch. Appl. Mech. 85, 991–1007 (2015).
S. P. Timoshenko, “On the correction for shear of the differential equation for transverse vibrations of prismatic bars,” in Static and Dynamic Problems of Elasticity Theory (Naukova Dumka, Kiev, 1975), pp. 56–57 [in Russian].
W. Voigt, Lehrbuch der Kristallphysik (Teubner, Leipzig, 1928).
S. G. Lekhnitskii, Theory of Elasticity of an Anisotropic Elastic Body (Holden-Day, San Francisco, Cal., 1950; Mir, Moscow, 1981).
G. E. Mase, Theory and Problems of Continuum Mechanics (McGraw-Hill, New York, 1970; Librokom, Moscow, 2010), in Ser.: Schaum’s Outline Series.
R. M. Christensen, Theory of Viscoelasticity (Academic, New York, 1971; Mir, Moscow, 1974).
I. S. Berezin and N. P. Zhidkov, Methods of Computations, Vol. 2 (Fizmatliz, Moscow, 1962) [in Russian].
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
To cite this work: Ryabov V.M., Yartsev B.A. “Nonclassical Vibrations of a Monoclinic Composite Strip,” Vestnik of St. Petersburg University. Mathematics. Mechanics. Astronomy, 2021, vol. 8(66), issue 4, pp. 695–708. (In Russian.) https://doi.org/10.21638/spbu01.2021.415.
Additional information
Translated by K. Gumerov
About this article
Cite this article
Ryabov, V.M., Yartsev, B.A. Nonclassical Vibrations of a Monoclinic Composite Strip. Vestnik St.Petersb. Univ.Math. 54, 437–446 (2021). https://doi.org/10.1134/S1063454121040166
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063454121040166