SpringerLink
Log in

Effect of two-pass rolling of textured roll and polished roll on surface topography and mechanical properties of 316L stainless steel ultra-thin strip

  • Original Paper
  • Published:
Journal of Iron and Steel Research International Aims and scope Submit manuscript

Abstract

The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm. After the two-pass rolling with the textured roll and polished roll (TPR), the surface roughness of the strip is dramatically reduced, and the surface topographical anisotropy index is diminished to 30.9% of the initial strip. Comparing with the strip rolled using the ground roll in both passes (GGR), the elongation of TPR rolled strip is obviously improved, and the mechanical property anisotropy is greatly weakened. The anisotropy index of tensile strength and elongation are 42.58% and 52.59% of that of GGR rolled strip, which is mainly attributed to the significant decrease of the texture intensity of the strip by TPR process. The results indicate that TPR process can obtain the stainless steel ultra-thin strip with smooth and uniform surface topography and good mechanical properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Germany)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  1. C. Wang, S. Xue, G. Chen, L. Cui, P. Zhang, J. Manuf. Process. 53 (2020) 293–303.

    Article  Google Scholar 

  2. C. Zhang, J. Ma, X. Liang, F. Luo, R. Cheng, F. Gong, J. Mater. Process. Technol. 262 (2018) 32–40.

    Article  Google Scholar 

  3. J. Huang, Z. Xu, X.N. Li, L. Peng, X. Lai, J. Mater. Process. Technol. 283 (2020) 116716.

    Article  Google Scholar 

  4. C. Zheng, C. Pan, Z. Tian, X. Zhao, G. Zhao, Z. Ji, L. Song, Opt. Laser Technol. 121 (2020) 105785.

    Article  Google Scholar 

  5. R. Janeiro, R. Flores, P. Dahal, J. Viegas, Opt. Express 24 (2016) 11611.

    Article  Google Scholar 

  6. Y. Hu, Y. Xuan, X. Wang, B. Deng, M. Saei, S. **, J. Irudayaraj, G.J. Cheng, Adv. Mater. 28 (2016) 9152–9162.

    Article  Google Scholar 

  7. H. Gao, Y. Hu, Y. Xuan, J. Li, Y. Yang, R.V. Martinez, C. Li, J. Luo, M. Qi, G.J. Cheng, Science 346 (2014) 1352–1356.

    Article  Google Scholar 

  8. C. Gu, Z. Shen, H. Liu, P. Li, M. Lu, Q. Zhang, X. Wang, Appl. Surf. Sci. 270 (2013) 281–286.

    Article  Google Scholar 

  9. J.Z. Lu, C.J. Yang, L. Zhang, A.X. Feng, Y.F. Jiang, J. Bionic Eng. 6 (2009) 180–185.

    Article  Google Scholar 

  10. P. Wang, W. Sin, M. Nai, J. Wei, Materials 10 (2017) 1121.

    Article  Google Scholar 

  11. H. Yang, F. **ong, Y. Wang, L. Jia, H. Liu, J. Hao, Int. J. Mach. Tools Manuf. 152 (2020) 103542.

    Article  Google Scholar 

  12. J. Man, H. Yang, Y. Wang, H. Chen, F. **ong, Opt. Laser Technol. 119 (2019) 105669.

    Article  Google Scholar 

  13. Y.X. Liu, C.C. Zhang, R.Z. Wang, K.M. Zhang, J. Wang, S.L. Yao, H. Chen, X.C. Zhang, H. Miura, J. Manuf. Process. 77 (2022) 412–425.

    Article  Google Scholar 

  14. Z. Shen, L. Zhang, J. Zhang, P. Li, X. Zhen, H. Liu, X. Wang, J. Manuf. Process. 72 (2021) 274–293.

    Article  Google Scholar 

  15. H. **e, K.I. Manabe, T. Furushima, K. Tada, Z. Jiang, Int. J. Adv. Manuf. Technol. 82 (2016) 65–73.

    Article  Google Scholar 

  16. C.S. Li, J.S. Chen, W.L. Han, Y.Y. Li, B. Fu, J. Iron Steel Res. Int. 21 (2014) 282–286.

    Article  Google Scholar 

  17. K. Hilgenberg, K. Steinhoff, J. Mater. Process. Technol. 225 (2015) 84–92.

    Article  Google Scholar 

  18. J.L. Gonçalves Jr., J.D.B. De Mello, H.L. Costa, Wear 470-471 (2021) 203614.

    Article  Google Scholar 

  19. K. Kenmochi, I. Yarita, H. Abe, A. Fukuhara, T. Komatu, H. Kaito, J. Mater. Process. Technol. 69 (1997) 106–111.

    Article  Google Scholar 

  20. Y. Sun, J. Mech. Eng. 53 (2017) 132.

    Article  Google Scholar 

  21. B. Meng, W.H. Wang, Y.Y. Zhang, M. Wan, J. Mater. Process. Technol. 271 (2019) 46–61.

    Article  Google Scholar 

  22. C. **a, X. Zhang, J. Zhang, H. Li, S. Jia, Steel Res. Int. 88 (2017) 160049.

    Article  Google Scholar 

  23. B. Ma, A.K. Tieu, C. Lu, Z. Jiang, J. Mater. Process. Technol. 125–126 (2002) 657–663.

    Article  Google Scholar 

  24. G. Bitelli, A. Simone, F. Girardi, C. Lantieri, Sensors 12 (2012) 9110–9128.

    Article  Google Scholar 

  25. E.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, H.H. Soliman, J. Mater. Process. Technol. 123 (2002) 133–145.

    Article  Google Scholar 

  26. B.F. He, C.E. Wei, B.X. Liu, S.Y. Ding, Z.Y. Shi, Opt. Precis. Eng. 26 (2018) 1994–2011.

    Article  Google Scholar 

  27. L. Li, K.C.P. Wang, Q. Li, Int. J. Pavement Res. Technol. 9 (2016) 49–62.

    Article  Google Scholar 

  28. P. Cao, Y. He, X. Fan, Z. Jiang, Journal of Central South University (Science and Technology) 44 (2013) 4624–4630.

    Google Scholar 

  29. K. Kang, C. Pelow, L. Witham, Wear 264 (2008) 434–438.

    Article  Google Scholar 

  30. X. Song, F. Wang, D. Qian, L. Hua, Mater. Sci. Eng. A 780 (2020) 139171.

    Article  Google Scholar 

  31. M. Huo, J. Zhao, H. **e, Z. Li, S. Li, H. Zhang, Z. Jiang, Wear 426-427 (2019) 1286–1295.

    Article  Google Scholar 

  32. J.G. Lenard, J. Mater. Process. Technol. 152 (2004) 144–153.

    Article  Google Scholar 

  33. S. Sheu, L.G. Hector Jr, O. Richmond, J. Tribol. 120 (1998) 517–527.

    Article  Google Scholar 

  34. H.Z. Zheng, S.H. Guo, Q.H. Luo, X.Y. Shu, G.F. Li, J. Iron Steel Res. Int. 26 (2019) 52–58.

    Article  Google Scholar 

  35. Z.D. Wang, G.F. Sun, Y. Lu, M.Z. Chen, K.D. Bi, Z.H. Ni, Surf. Coat. Technol. 385 (2020) 125403.

    Article  Google Scholar 

  36. Y. Li, Y. Lian, F. **g, T. He, Y. Zou, Appl. Surf. Sci. 627 (2023) 157334.

    Article  Google Scholar 

  37. W. Deng, C. Wang, H. Lu, X. Meng, Z. Wang, J. Lv, K. Luo, J. Lu, Int. J. Mach. Tools Manuf. 191 (2023) 104061.

    Article  Google Scholar 

  38. H. Li, Z. Jiang, D. Wei, X. Gao, J. Xu, X. Zhang, Appl. Surf. Sci. 347 (2015) 193–201.

    Article  Google Scholar 

  39. H. Li, A. Öchsner, D. Wei, G. Ni, Z. Jiang, Appl. Surf. Sci. 359 (2015) 236–244.

    Article  Google Scholar 

  40. C. Haase, L.A. Barrales-Mora, Acta Mater. 150 (2018) 88–103.

    Article  Google Scholar 

  41. L. Sun, F. Jiang, R. Huang, D. Yuan, C. Guo, J. Wang, Mater. Sci. Eng. A 787 (2020) 139514.

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Nos. 51974196, 52275361, and 52305406), the Key Projects of the National Natural Science Foundation of China (No. U22A20188) and the Special Projects of the Central Government in Guidance of Local Science and Technology Development (YDZX20191400002149).

Author information

Authors and Affiliations

  1. College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China

    Zeng-qiang Zhang, ** Liao, Zhong-kai Ren, Zhen-hua Wang, Ya-xing Liu, Tao Wang & Qing-xue Huang

  2. Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment of Ministry of Education, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China

    Zeng-qiang Zhang, ** Liao, Zhong-kai Ren, Zhen-hua Wang, Ya-xing Liu, Tao Wang & Qing-xue Huang

  3. National Key Laboratory of Metal Forming Technology and Heavy Equipment, Taiyuan University of Technology, Taiyuan, 030024, Shanxi, China

    Zeng-qiang Zhang, Zhong-kai Ren, Zhen-hua Wang, Ya-xing Liu, Tao Wang & Qing-xue Huang

  4. Shanxi TISCO Stainless Steel Precision Strip Co., Ltd., Taiyuan, 030032, Shanxi, China

    ** Liao

Authors
  1. Zeng-qiang Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. ** Liao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhong-kai Ren
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Zhen-hua Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ya-xing Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Tao Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Qing-xue Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Tao Wang.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Zq., Liao, X., Ren, Zk. et al. Effect of two-pass rolling of textured roll and polished roll on surface topography and mechanical properties of 316L stainless steel ultra-thin strip. J. Iron Steel Res. Int. (2024). https://doi.org/10.1007/s42243-024-01219-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s42243-024-01219-0

Keywords

Search

Navigation