Log in

Design and development of strip electrode power supply for HEPS wiggler

  • Original Paper
  • Published:
Radiation Detection Technology and Methods Aims and scope Submit manuscript

Abstract

Purpose

The high-energy photon source (HEPS) is the first fourth-generation synchrotron photon source in China (Jiang et al. in Sci Sin Phys Mech Astron 44:1075–1094, 2014). The strip electrode and its power supply provide necessary hardware support for correcting the magnetic field of the wiggler as reported by Zhao and Yin (Particle accelerator technology, Higher Education Press, Bei**g, 2006). The design of the conventional power supply for accelerators, with a large output current and high output voltage, making it easy to achieve high stability of the output current. The strip electrode power supply poses difficulties in achieving high stability due to its small output current and voltage. Because of size limitations, as well as the requirements of the power architecture, there are currently no commercial products for this type of power supply.

Methods

Designed and developed 32 strip electrode power supplies. Considering the large number of power supplies and limited space, a rack structure design was adopted, placing all power supplies in one rack. The main circuit of the power supply adopts a full bridge transformation structure (Chao et al. in Radiat Detect Technol Methods 6:470–478, 2022), and the control scheme adopts full digital control based on FPGA (Long and Cheng in At Energy Sci Technol 43:780–784, 2009). The power supply has two control modes: local operation and remote operation as reported by Lu (Particle accelerator technology, Hunan University, Changsha, 2010).

Results

The test shows that all power supplies meet the indicator requirements, with a stability of less than 100 ppm.

Conclusions

The strip electrode power supply can effectively correct the multipole integral field error and improve the integral field performance of the wiggler.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Germany)

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. X. Jiang, J.Q. Wang, Q. Qin et al., Chinese high energy photon source and the test facility. Sci. Sin. Phys. Mech. Astron. 44(10), 1075–1094 (2014) (in Chinese)

    Article  Google Scholar 

  2. J. Zhao, Z. Yin, Particle accelerator technology (Higher Education Press, Bei**g, 2006)

    Google Scholar 

  3. H. Chao, L. Fengli, G. Yao et al., Development of corrector magnet power supply for high energy photon source. Radiat. Detect. Technol. Methods 6, 470–478 (2022)

    Article  Google Scholar 

  4. F. Long, J. Cheng, Design of a digital regulator based on field programmable gate array. At. Energy Sci. Technol. 43(9), 780–784 (2009) (in Chinese)

    Google Scholar 

  5. J. Lu, The research and design of magnet power supply digital module (Hunan University, Changsha, 2010) (in Chinese)

    Google Scholar 

  6. X. Guo, P. Liu, C. Han, B. Chen, Development of high precision and stability DC power supply prototype for high energy photon source. At. Energy Sci. Technol. 58, 1523 (2019) (in Chinese)

    Google Scholar 

  7. P. Liu, X. Wang, F. Long, Fast corrector power supply design for HEPS. Radiat. Detect. Technol. Methods 4, 56–62 (2020). https://doi.org/10.1007/s41605-019-0149-4

    Article  Google Scholar 

  8. Datasheet of Hall sensor. https://www.lem.com/cn/product-list/la-150tpsp1

  9. L. Peng, L. Fengli, A precision ADC sampling system design. Radiat. Detect. Technol. Methods 4, 182–189 (2020)

    Article  Google Scholar 

  10. P. Liu, F.L. Long, Y.Z. Du, Design of precision acquisition system for precision power supply of photon source. Radiat. Detect. Technol. Methods 5, 586–593 (2021)

    Article  Google Scholar 

  11. J. Lu, Y. Yan, J. Lv, Q. Li, F. Long, The design of AD/DA board used in digital power control model. Nucl. Electron. Detect. Technol. 43(1), 110–113 (2010) (in Chinese)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yang Li.

Ethics declarations

Conflict of interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, Y., Li, Y., Du, Y. et al. Design and development of strip electrode power supply for HEPS wiggler. Radiat Detect Technol Methods (2023). https://doi.org/10.1007/s41605-023-00432-x

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s41605-023-00432-x

Keywords

Navigation