Abstract
The basic sintering characteristics of Yandi ore from Australia, including assimilation ability, liquid phase fluidity, self-strength of bonding phase, forming ability of silico ferrite of calcium and aluminum (SFCA), and so on, were investigated in detail. Besides, the high temperature behavior and function of sintering were obtained. As a result, the techniques for ore-proportioning in sintering were obtained. The results show that Yandi ore possessing higher assimilation ability, better liquid phase fluidity, lower self-strength of bonding phase, and better forming ability of SFCA, should be mixed with iron ores whose properties are opposite to those of Yandi ore. In the optimization of sintering ore-proportioning, Yandi ore, whose price is relatively low, can be mixed as high as 40wt%.
Similar content being viewed by others
References
G.X. Yang, Research and production practice of ore-proportion with Yandi ore fines, Shanxi Metall. (in Chinese), 31(2008), No.4, p.1.
Z.L. Liu, J.F. Yang, G.S. Feng, et al., Study on sintering test with high ratio of limonite, Iron Steel (in Chinese), 39(2004), No.2, p.9.
T. Otomo, N. Taguch, and E. Kasai, Suppression of the formation of large pores in the assimilated parts of sinter produced using pisolitic ores, ISIJ Int., 36(1996), No.11, p.1338.
N. Sakamoto, H. Noda, K. Ichikawa, et al., A commercial production test of iron ore sinter using high amounts of pisolite ores and quality evaluation of the sinter products, ISIJ Int., 37(1997), No.11, p.1066.
S.L. Wu, Y. Liu, J.X. Du, et al., New concept of iron ore basic sintering characteristics, J. Univ. Sci. Technol. Bei**g (in Chinese), 24(2002), No.3, p.254.
X.L. Gao, Y.Q. **, L.K. Ma, and Y.N. Wang, Optimization of sinter ore matching for large blast furnace, Angang Technol. (in Chinese), 2009, No.1, p.14.
D.W. Yang and Y.S. Huang, Research and practice of optimizing ore-proportion in sintering, Sinter. Pelletiz. (in Chinese), 32(2007), No.2, p.21.
S.L. Wu, Y. Liu, J.X. Du, et al., Experiment study of assimilation ability between iron ores and CaO, J. Univ. Sci. Technol. Bei**g (in Chinese), 24(2002), No.3, p.258.
S.L. Wu, J.X. Du, H.B. Ma, et al., Fluidity of liquid phase in iron ores during sintering, J. Univ. Sci. Technol. Bei**g (in Chinese), 27(2005), No.3, p.291.
S.L. Wu, J.X. Du, H.B. Ma, et al., Self-strength of binding phase in iron ores during sintering, J. Univ. Sci. Technol. Bei**g (in Chinese), 27(2005), No.2, p.169.
S.L. Wu, J. Wang, and J.X. Du, Basic study on the formation character of SFCA of iron ore fines (in Chinese), [in] The 2nd Metallurgical Engineering Proceedings, Bei**g, 2003, p.17.
J.Z. Zhang, H.L. Deng, W.Z. Ao, and Y.B. Zhao, Influence of SiO2 and FeO contents in charge on sinter strength, Iron Steel (in Chinese), 43(2008), No.5, p.18.
Y.R. Li, M.S. Zhou, L.W. Huo, and Q. Wang, Experimental study on limonitic sintering, Sinter. Pelletiz. (in Chinese), 30(2005), No.1, p.4.
H.X. Li, S.L. Wu, and Q. Li, Experiment and research on the basic characteristics of Yandi in sintering, Shandong Metall. (in Chinese), 29(2007), No.1, p.30.
C.Z. Li, J.L. Zhao, and C.X. Yao, Sintering properties of Yandi ore and its production practice, Hebei Metall. (in Chinese), 2006, No.1, p.16.
F.Z. Jia and L.K. Ma, Experimental study on Yangdi ore proportion in sintering production, Angang Technol. (in Chinese), 2007, No.2, p.13.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, Sl., Han, Hl., Li, Hx. et al. Ore-proportioning optimization technique with high proportion of Yandi ore in sintering. Int J Miner Metall Mater 17, 11–16 (2010). https://doi.org/10.1007/s12613-010-0102-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-010-0102-5